I have an EXTREMELY LIGHTLY-USED Tac Ops Kilo (re-worked McMillan A3-5) stock for sale. This stock came off of a pampered Kilo 51 (.308). It's Tac Ops signature texturing and OD Green & Black epoxy paint scheme is in IMMACULATE condition with the exception of three (3) small scratches that have been touched-up (see 8X magnification photo of scratches on RH side of stock) and some VERY SLIGHT wear at the bottom rear of the recoil pad the stock is perfect. NO ACTION SCREWS, FLOORPLATE, FOLLOWER, OR SPRING ARE INCLUDED.
This Kilo stock was built on the McMillan A3-5 stock and is inletted for a SA Remington 700. Barrel channel is Remington Varmint, bottom is inletted for a Williams Floorplate. Features include: Sniper Fill, Machined-in Pillars, McMillan Single Screw Clampbar Cheekpiece (Height and Lateral adjustments) McMillan Spacer System L.O.P. (Length Of Pull), McMillan "Basketweave" Recoil Pad, 8" Anschutz Rail (screws "timed" by Tac Ops, of course), Anschutz Rail Bipod Adapter, and one (1) 360 Degree Flush Cup Base on the bottom "flat" of the buttstock. The full stack of LOP spacers is included. An A3-5 as configured would cost $1,008.00 plus shipping from McMillan.
McMillan A3-5 Adj. (Full Inlet including Action, Floorplate, & Barrel Channel)..$603.00
Machined-In Pillars........................................................................................................$32.00
McMillan Single Screw Clampbar ACH......................................................................$141.00
McMillan Spacer System LOP......................................................................................$141.00
8" Anschutz Rail.............................................................................................................$64.00
Anschutz Rail Bipod Adapter........................................................................................$12.00
Flush Cup Base (Buttstock Rear).................................................................................. $15.00
Stock Subtotal before shipping...............................................................................$1,008.00
In addition to the $1,008.00 cost of the McMillan A3-5 Adj., Tac Ops charges $150.00 for Bedding and $225.00 for Texturing & Paint, so the Kilo stock costs $1,383.00. However, since the new owner would probably want to machine-out the bedding or at least some of it (read, a PITA), for a skim bedding, I'll zero-out the $150.00 bedding cost. However, that's still $1,233.00 ($1,008.00 A3-5 Adj., plus $225.00 Texturing & Paint).
$750.00 $700.00 $675.00 $650.00 $600.00 $550.00 Shipped & Insured FedEx Ground with Adult Signature Required. Includes the Anschutz Bipod Rail Adapter in the photos. NO FLOORPLATE, FOLLOWER, SPRING, OR ACTION SCREWS INCLUDED.
The stock will be shipped FedEx Ground with Adult Signature Required in CONUS ONLY. PLEASE BE SURE AN ADULT WILL BE AT YOUR SHIPPING ADDRESS TO SIGN FOR THE PACKAGE! IF THE PACKAGE IS RETURNED TO TAC OPS THE BUYER IS RESPONSIBLE FOR RE-SHIPMENT, WHICH IS IN THE $75.00+ RANGE.
PAYMENT TO BE VIA PAYPAL F&F, OR ADD 3.6% FOR THE EVIL PAYPAL FEES. POSTAL MONEY ORDERS HAVE BECOME A PROBLEM BECAUSE OF THE ILLEGIBLE WRITING OF SEVERAL PEOPLE. I HAD TWO PMOs' THAT WERE HELD BY THE BANK FOR 10 F'IN DAYS!
Kilo stock #1 -$750.00 $700.00 675.00 650.00600.00 550.00 Shipped & Insured FedEx Ground with Adult Signature Required. Includes the Anschutz Bipod Rail Adapter in the photos. NO FLOORPLATE, FOLLOWER, SPRING, OR ACTION SCREWS INCLUDED.
Small scratches (at 8X magnification) on RH side of stock are about 3mm long each and located approximately 6" from the front of the forearm:
Keith
This Kilo stock was built on the McMillan A3-5 stock and is inletted for a SA Remington 700. Barrel channel is Remington Varmint, bottom is inletted for a Williams Floorplate. Features include: Sniper Fill, Machined-in Pillars, McMillan Single Screw Clampbar Cheekpiece (Height and Lateral adjustments) McMillan Spacer System L.O.P. (Length Of Pull), McMillan "Basketweave" Recoil Pad, 8" Anschutz Rail (screws "timed" by Tac Ops, of course), Anschutz Rail Bipod Adapter, and one (1) 360 Degree Flush Cup Base on the bottom "flat" of the buttstock. The full stack of LOP spacers is included. An A3-5 as configured would cost $1,008.00 plus shipping from McMillan.
McMillan A3-5 Adj. (Full Inlet including Action, Floorplate, & Barrel Channel)..$603.00
Machined-In Pillars........................................................................................................$32.00
McMillan Single Screw Clampbar ACH......................................................................$141.00
McMillan Spacer System LOP......................................................................................$141.00
8" Anschutz Rail.............................................................................................................$64.00
Anschutz Rail Bipod Adapter........................................................................................$12.00
Flush Cup Base (Buttstock Rear).................................................................................. $15.00
Stock Subtotal before shipping...............................................................................$1,008.00
In addition to the $1,008.00 cost of the McMillan A3-5 Adj., Tac Ops charges $150.00 for Bedding and $225.00 for Texturing & Paint, so the Kilo stock costs $1,383.00. However, since the new owner would probably want to machine-out the bedding or at least some of it (read, a PITA), for a skim bedding, I'll zero-out the $150.00 bedding cost. However, that's still $1,233.00 ($1,008.00 A3-5 Adj., plus $225.00 Texturing & Paint).
The stock will be shipped FedEx Ground with Adult Signature Required in CONUS ONLY. PLEASE BE SURE AN ADULT WILL BE AT YOUR SHIPPING ADDRESS TO SIGN FOR THE PACKAGE! IF THE PACKAGE IS RETURNED TO TAC OPS THE BUYER IS RESPONSIBLE FOR RE-SHIPMENT, WHICH IS IN THE $75.00+ RANGE.
PAYMENT TO BE VIA PAYPAL F&F, OR ADD 3.6% FOR THE EVIL PAYPAL FEES. POSTAL MONEY ORDERS HAVE BECOME A PROBLEM BECAUSE OF THE ILLEGIBLE WRITING OF SEVERAL PEOPLE. I HAD TWO PMOs' THAT WERE HELD BY THE BANK FOR 10 F'IN DAYS!
Kilo stock #1 -
Small scratches (at 8X magnification) on RH side of stock are about 3mm long each and located approximately 6" from the front of the forearm:
Keith
Last edited:
