Moving along new takeoffs and a couple I shot/tried very briefly. Details to follow but all are Cerakoted F or H series black and threaded appropriately for barrel diameter and caliber. Threading dialed in to bore not Outside diameter on a fine Precision Matthews lathe. Usually only work on my projects but had some hot days and just included them in the process in the A/C staying cool.
All prices are with shipping included CONUS. FYI If a guy is lucky a sporter barrel ships just under $20. If you grab a few I'll pass along the savings.
1) Rem 700 Barrels - Brand new unfired takeoffs threaded 5/8 x 24 and cerakoted black
- .308 Win CDL takeoff 10 twist 5R rifling 24" $170 shipped
- 6.5 CM ADL takeoff 8 twist 5R rifling 24" (QTY 2) $160 shipped each
2) Tikka Barrels - light use
- .243 Win Stainless 22" 8 twist, 1/2 x 28 threaded, black cerakote - like new 20 rounds fired by me. I have 4 other hunting cartridges so not sure what I was thinking. $160 shipped....these are hard to find and this is basically new.
- 6.5 Creedmoor 24" 8 Twist 1/2 x 28 threaded, black cerakote - Probably 40 rounds on it of load development for a hunting season $110 shipped
- 7mm Rem Mag 24" Fluted 9 twist Threaded 9/16 x 24 black Cerakote - Swapped with a guy and he said 100 Rds and it looks no more than that on the bore scope with sharp lands and no firecracking in the throat/lands. $90 shipped
- 7mm Rem Mag 24" 9 twist Stainless new takeoff barrels (Qty 3) not threaded or cerakoted yet but will do that if you want. The Tikka muzzle ends on these are the same or slightly less than the proper OD of 5/8 x 24 threads so you can do it but a shoulder should be added and it's more time/work. 9/16 x 24 is better/easier but less options for a brake. Anyway not looking for work but will set you up with a new threaded barrel if you're shooting 7Rem Mag now because I'm a nice guy and I'd want a brake.
A note on headspacing....Tikka's are pretty good and have headspaced for me with different barrels but you need to get your 'Smith to check or check with go/no gages yourself if you know what you're doing.
The Rem 700 barrels could be close or good (headspace properly) but they could easily be out due to more variance in the components so DON'T assume they will and if you like your face don't assume any barrel/action does without checking or getting it checked properly.
Just PM me privately so you don't attract scammers unless it's general question everyone would benefit from. First come first serve...prefer electronic payment but will take money orders.
Always looking for barrel blanks for trades and of course I want everything I haven't tried out
Thanks
- Kent
All prices are with shipping included CONUS. FYI If a guy is lucky a sporter barrel ships just under $20. If you grab a few I'll pass along the savings.
1) Rem 700 Barrels - Brand new unfired takeoffs threaded 5/8 x 24 and cerakoted black
- .308 Win CDL takeoff 10 twist 5R rifling 24" $170 shipped
- 6.5 CM ADL takeoff 8 twist 5R rifling 24" (QTY 2) $160 shipped each
2) Tikka Barrels - light use
- .243 Win Stainless 22" 8 twist, 1/2 x 28 threaded, black cerakote - like new 20 rounds fired by me. I have 4 other hunting cartridges so not sure what I was thinking. $160 shipped....these are hard to find and this is basically new.
- 6.5 Creedmoor 24" 8 Twist 1/2 x 28 threaded, black cerakote - Probably 40 rounds on it of load development for a hunting season $110 shipped
- 7mm Rem Mag 24" Fluted 9 twist Threaded 9/16 x 24 black Cerakote - Swapped with a guy and he said 100 Rds and it looks no more than that on the bore scope with sharp lands and no firecracking in the throat/lands. $90 shipped
- 7mm Rem Mag 24" 9 twist Stainless new takeoff barrels (Qty 3) not threaded or cerakoted yet but will do that if you want. The Tikka muzzle ends on these are the same or slightly less than the proper OD of 5/8 x 24 threads so you can do it but a shoulder should be added and it's more time/work. 9/16 x 24 is better/easier but less options for a brake. Anyway not looking for work but will set you up with a new threaded barrel if you're shooting 7Rem Mag now because I'm a nice guy and I'd want a brake.
A note on headspacing....Tikka's are pretty good and have headspaced for me with different barrels but you need to get your 'Smith to check or check with go/no gages yourself if you know what you're doing.
The Rem 700 barrels could be close or good (headspace properly) but they could easily be out due to more variance in the components so DON'T assume they will and if you like your face don't assume any barrel/action does without checking or getting it checked properly.
Just PM me privately so you don't attract scammers unless it's general question everyone would benefit from. First come first serve...prefer electronic payment but will take money orders.
Always looking for barrel blanks for trades and of course I want everything I haven't tried out
Thanks
- Kent
