- Aero Precision M4E1 receiver set
- Aero Precision 15” Enhanced Gen 2 handguard (ODG)
- Ballistic Advantage 10.5” govt profile 5.56 barrel
- Seekins AGB w/ carbine length tube
- CMC enhanced BCG w/ headspaced bolt
- CMC single stage competition trigger
- Aero Precision ambi charging handle
- Geissele DDC 6-position buffer tube
- Trinity Force SBA captured buffer spring
- SBA3 brace (FDE)
The handguard was milled to allow access to the gas block and then coated (see pic but looks factory). Obviously, it’s meant to be shot suppressed and will fit any can up to 1.5” OD inside the rail.
Nice little build with less than 200 rounds through it. Weighs around 7lbs as pictured (w/ SiCo Omega and optic).
$OLD @Top0369
Romeo5 is not included but available for an additional $100 to the buyer. Suppressor is not included.
May consider some trades, need the following:
- 11.3/5” 5.56 barrel (Criterion Core, BA Hanson)
- .25 Berger 135gr LRHT
- .224 Berger 85.5gr Hybrids
- R700 SA chassis (JV comp or similar)
- Other offers considered
- Aero Precision 15” Enhanced Gen 2 handguard (ODG)
- Ballistic Advantage 10.5” govt profile 5.56 barrel
- Seekins AGB w/ carbine length tube
- CMC enhanced BCG w/ headspaced bolt
- CMC single stage competition trigger
- Aero Precision ambi charging handle
- Geissele DDC 6-position buffer tube
- Trinity Force SBA captured buffer spring
- SBA3 brace (FDE)
The handguard was milled to allow access to the gas block and then coated (see pic but looks factory). Obviously, it’s meant to be shot suppressed and will fit any can up to 1.5” OD inside the rail.
Nice little build with less than 200 rounds through it. Weighs around 7lbs as pictured (w/ SiCo Omega and optic).
$OLD @Top0369
Romeo5 is not included but available for an additional $100 to the buyer. Suppressor is not included.
May consider some trades, need the following:
- 11.3/5” 5.56 barrel (Criterion Core, BA Hanson)
- .25 Berger 135gr LRHT
- .224 Berger 85.5gr Hybrids
- R700 SA chassis (JV comp or similar)
- Other offers considered
Last edited:
