I have this Tikka T3 300WSM with less than 30 rounds through it. It is sitting in a Manners EHTA stock that has left side non-rotating QD mounts and one front sling stud for a bipod.
The DBM is an Atlasworxs DBM and if you will notice the inlet for the stock is slightly off as I inletted the stock for a CDI DBM then discovered after the fact that CDI is no more so bottom metals for Tikkas were not available; however, in speaking with Atlasworxs I learned that their foot print is almost the same size. I received the DBM and it dropped in just fine.
The magazine is a 3rd Area 419 mag (or one I ordered from them)
The rifle was threaded by Southern Indiana Precision with a 9/16-24 thread pattern and has a Shrewd muzzle break to go with it and a 9/16-24 to 5/8-24 adaptor if one wanted to run a can (which I do) I did the break with it in the event I went somewhere that did not allow suppressors and figured it would help re-sale too.
I have the factory box for the rifle and it has a Tally 20moa rail with a built in bubble level.
$1,300 shipped to your FFL
PayPal F&F or add 3% for G&S
PM for additional information / references.
The DBM is an Atlasworxs DBM and if you will notice the inlet for the stock is slightly off as I inletted the stock for a CDI DBM then discovered after the fact that CDI is no more so bottom metals for Tikkas were not available; however, in speaking with Atlasworxs I learned that their foot print is almost the same size. I received the DBM and it dropped in just fine.
The magazine is a 3rd Area 419 mag (or one I ordered from them)
The rifle was threaded by Southern Indiana Precision with a 9/16-24 thread pattern and has a Shrewd muzzle break to go with it and a 9/16-24 to 5/8-24 adaptor if one wanted to run a can (which I do) I did the break with it in the event I went somewhere that did not allow suppressors and figured it would help re-sale too.
I have the factory box for the rifle and it has a Tally 20moa rail with a built in bubble level.
$1,300 shipped to your FFL
PayPal F&F or add 3% for G&S
PM for additional information / references.
Attachments
- 366E0430-781B-4F80-9D3F-6474AE3FDC2F.jpeg612.3 KB · Views: 134
- 71589338-75E4-4EA7-A8A3-D47B0E181150.jpeg1.4 MB · Views: 140
- EB5CF216-937D-44E0-AD57-4B476A078EE4.jpeg336.7 KB · Views: 131
- 0721B9FC-B582-4AB8-8022-6960EE1EA0F2.jpeg309.9 KB · Views: 100
- B8E6624A-6F2D-46CC-8C82-DFF7E8CC3315.jpeg416.9 KB · Views: 98
- 6A66E3CD-D059-4FC1-B7B2-A99E44BBF5A2.jpeg568.6 KB · Views: 106
- B935CE5E-ECF6-456E-921E-1FDA6342C651.jpeg470.3 KB · Views: 104
- CAED308E-4C11-4A81-918D-A3D103C864C8.jpeg679.4 KB · Views: 89
- 5DFF8FFB-F8B4-4D78-AC25-31D79345BB4D.jpeg533.5 KB · Views: 77