Firearms WTT Christensen Arms MPP 308

[predatorslayer]

Looking to trade a LNIB CA MPP in 308. Comes with original box and paperwork. Has 26 rounds down it, only been to the range. I was hoping this would be my new mountain rifle for big game hunting, but I am pretty tall (6’5”) and the LOP is just too short for me to shoot this comfortably. Super light weight and folds down short enough to fit in a pack. Gun is a shooter - target was shot with some cheap factory ammo at 300 yards.

Looking to trade for a Christensen Ridgeline Ti. I’d prefer a 308 or 6.5 CM. Might do a 300 PRC or 28 Nosler. If you have something else you think I should consider let me know. Needs to be lightweight, 6lbs or less. Also interested in 280AI.

 

[Bowhntr4life]

Value?

 

[predatorslayer]

Value?

Their MSRP’s are within a couple hundred. Depending on condition of the trade, we can come up with something fair. Its for the MPP only. Scope is not included.

 

[Whisper308]

Any interest in an out right sale?

 

[predatorslayer]

Any interest in an out right sale?

I think for now I am only interested in trades.

 

[predatorslayer]

TTT

 

[predatorslayer]

TTT

 

[predatorslayer]

TTT

 

[predatorslayer]

TTT

 

[CrazyAZGreenBeret]

Looking to trade a LNIB CA MPP in 308. Comes with original box and paperwork. Has 26 rounds down it, only been to the range. I was hoping this would be my new mountain rifle for big game hunting, but I am pretty tall (6’5”) and the LOP is just too short for me to shoot this comfortably. Super light weight and folds down short enough to fit in a pack. Gun is a shooter - target was shot with some cheap factory ammo at 300 yards.

Looking to trade for a Christensen Ridgeline Ti. I’d prefer a 308 or 6.5 CM. Might do a 300 PRC or 28 Nosler. If you have something else you think I should consider let me know. Needs to be lightweight, 6lbs or less. Also interested in 280AI.

View attachment 7826344View attachment 7826346

Hey brother, not trying to change your mind but got a buddy about to pull the trigger and we are wondering on the 1913 set up is it two bolts holding it in there when you flip the SB FS1913 Brace to the side? He was thinking about putting a AR-15 adapter and long buffer tube (spring and buffer not needed) then a 5-position SB3 brace.) Another option mount the Telemod from JTAC Elf Owl. Then also look into other extend aluminum with cheek weld riser from A3 Tactical. I’m 6’4 and that Telemod goes to 13” I know what you got is only a little over 9”. Lastly I always have to use a scope mount that has extends the center of the forward edge because I’m a big SOB. I’m 290, 6’4”.

 

[predatorslayer]

Hey brother, not trying to change your mind but got a buddy about to pull the trigger and we are wondering on the 1913 set up is it two bolts holding it in there when you flip the SB FS1913 Brace to the side? He was thinking about putting a AR-15 adapter and long buffer tube (spring and buffer not needed) then a 5-position SB3 brace.) Another option mount the Telemod from JTAC Elf Owl. Then also look into other extend aluminum with cheek weld riser from A3 Tactical. I’m 6’4 and that Telemod goes to 13” I know what you got is only a little over 9”. Lastly I always have to use a scope mount that has extends the center of the forward edge because I’m a big SOB. I’m 290, 6’4”.

Not bad ideas. Whats the cheek piece in the pics? I need one of those if I am going to keep it. Are you asking about how the brace attaches to the chassis? Its a dove tail set up with one screw. I am not very familiar with ARs - I just bought my first complete lower to build one. I have always been a bolt gun guy. I love everything about the gun except for the short LOP. So if I could figure that out, I would keep it in a heart beat. Also, that cheek piece would be a game changer. I am super happy with the accuracy as well.

 

[Farmerbrown32]

I bought a cheek piece from mk machining. It holds an extra round also. Works pretty good

 

[predatorslayer]

I bought a cheek piece from mk machining. It holds an extra round also. Works pretty good

I just found and ordered one from A3 Tactical.

 

[CrazyAZGreenBeret]

Yep it’s from A3 tactical they make good stuff! also look at https://www.mcarbo.com/ar-15-cheek-pad-magpul-moe-magpul-ctr-stocks.aspx for a nice soft piece to go on top of that.

 

[CrazyAZGreenBeret]

Still thinking you can either convert this to make it longer or look at the stuff on A3 to get it the way you like it. Wish I had it in hand. If my buddy gets one soon I’ll let you know. I’m getting Jtac Elf Owl, but I know you can make this work because we both were looking at the cheek riser and how to extend the aluminum folder.

 

[CrazyAZGreenBeret]

Another good site we were looking at is JMAC customs. You can put a Ar brace on the first picture like the tail hook and that’s the 9” . They also got other stuff. Just saying they have stuff to look at for solutions.

 

[CrazyAZGreenBeret]

Recommendations are like assholes there are so many. Man if we can get AR-15 end on that sucker like can you take brace off? If you do it should be just a 1913 pic rail right? How is that held on to the chassis? Because if you can unscrew it and add AR-15 end (first picture) there are different ones the options open like the Grand Canyon. Example https://doublestarusa.com/ar-ul-ultra-lite-stock-buffer-tube-spring-not-included-black-0-5-a140. (Second picture). Take off stock so you don’t SPR it and add Tail hook from https://gearheadworks.com/product/tailhook-mod-1-4/ (last two pics). the buffer tube has cloth on it and would be comfortable for skin.

 

[CrazyAZGreenBeret]

Crap forgot last two pictures

 

[predatorslayer]

Recommendations are like assholes there are so many. Man if we can get AR-15 end on that sucker like can you take brace off? If you do it should be just a 1913 pic rail right? How is that held on to the chassis? Because if you can unscrew it and add AR-15 end (first picture) there are different ones the options open like the Grand Canyon. Example https://doublestarusa.com/ar-ul-ultra-lite-stock-buffer-tube-spring-not-included-black-0-5-a140. (Second picture). Take off stock so you don’t SPR it and add Tail hook from https://gearheadworks.com/product/tailhook-mod-1-4/ (last two pics). the buffer tube has cloth on it and would be comfortable for skin.

So I havent ever pulled the brace off until right now - it is a 1913 pic rail…interesting. The pic rail is milled into the chassis…doesnt come off.

 

[CrazyAZGreenBeret]

You could literally attach mad shit to that if it’s like this! One Allen head.

 

[CrazyAZGreenBeret]

This one isn’t cheap but look at LOP! If you got a SB3 brace it would increase of course some. https://a3-tactical-inc.myshopify.c...ducts/direct-fit-folding-butt-stock-cz-bren-2

 

[CrazyAZGreenBeret]

Fucking found it!!! Slide this shit on and unbolt nothing!!!! https://www.sigsauer.com/sig-sauer-stock-adapter-1913-interface-folding-knuckle.html

 

[ColdBore007]

PM Sent

 

[predatorslayer]

Fucking found it!!! Slide this shit on and unbolt nothing!!!! https://www.sigsauer.com/sig-sauer-stock-adapter-1913-interface-folding-knuckle.html

Thats it!!

 

[predatorslayer]

This one isn’t cheap but look at LOP! If you got a SB3 brace it would increase of course some. https://a3-tactical-inc.myshopify.com/collections/stocks-and-stock-adapters-1/products/direct-fit-folding-butt-stock-cz-bren

That LOP is perfect…

 

[CrazyAZGreenBeret]

Another brother sent this and might be nice as a folder. https://www.primaryarms.com/search?keywords=M1913 picatinny to buffer

 

[CrazyAZGreenBeret]

Props to who sent it

 

[predatorslayer]

TTT

 

[predatorslayer]

Will sale for $2000. I really wanted to make this work. I have tried 3 different scopes, the LOP is just too short. Have added the A3 Tactical Cheek Rest. I put 14 more rounds through it last week after I added the cheek rest. So it has exactly 40 rounds through it. I also swapped scopes last week and it has a Zeiss V4 4-16x44 on it. Its in Vortex PMR (Seekins) rings and come with vortex defender scope caps. This can be negotiated into the deal.

 

[predatorslayer]

TTT

 

[cataractjack]

Is this still available? I have a custom 280 AI weighs around 5lbs. Thx!