WWIII Build "6.5 Commie Killer"

[762 ULTRAMAGA]

Aight so the leftists and neocon uniparty running our country seem intent on thrusting us balls deep into WW3, sooo I decided it was time to fill a void in my arsenal.

I'm set up to kill commies really really far away, I'm also set up to kill commies close.
What I needed was a tool to kill commies far and close..
Enter the 6.5 Commie Killer AR 10 build!

I just got her assembled tonight, here's the specs:
Zev receiver set
Criterion 18" barrel 8 twist
JP full mass HP BCG
2A ultralight 15" handguard
Larue MBT2S trigger
Griffin SOB buffer assembly
MGT minimalist stock
SLR 7 AGB
Trijicon tenmile 3-18×50
Aero ultralight mount
Nomad LT suppressor

She weights 7lbs 10 oz neked, and 11 lbs ready to smoke commies.

More to come

 

[stevieb92]

Solid build. A range report is required since you posted pics.

 

[232593]

Aight so the leftists and neocon uniparty running our country seem intent on thrusting us balls deep into WW3, sooo I decided it was time to fill a void in my arsenal.

I'm set up to kill commies really really far away, I'm also set up to kill commies close.
What I needed was a tool to kill commies far and close..
Enter the 6.5 Commie Killer AR 10 build!

I just got her assembled tonight, here's the specs:
Zev receiver set
Criterion 18" barrel 8 twist
JP full mass HP BCG
2A ultralight 15" handguard
Larue MBT2S trigger
Griffin SOB buffer assembly
MGT minimalist stock
SLR 7 AGB
Trijicon tenmile 3-18×50
Aero ultralight mount
Nomad LT suppressor

She weights 7lbs 10 oz neked, and 11 lbs ready to smoke commies.

More to come

View attachment 8278362View attachment 8278364
View attachment 8278370

I wish you the best of luck in your vermin eradication endeavor.

Happy hunting.

 

[Milf Dots]

Sweet looking rifle.

 

[762 ULTRAMAGA]

Solid build. A range report is required since you posted pics.

Absolutely
My dies will be here next week and I have a pile of 147 eldms

 

[232593]

Will this be a 6.5 Creedmoor or are you making an entirely new “6.5 Commie Killer” cartridge?

 

[Michael52]

I like it. It's important to have various distances covered. I have a similar one. It is my midrange for about 300 yards. I have a RPR for upto about 600 yards and an AR-15 for close up.

 

[762 ULTRAMAGA]

Will this be a 6.5 Creedmoor or are you making an entirely new “6.5 Commie Killer” cartridge?

Just the standard creedmoor

 

[762 ULTRAMAGA]

I broke down and bought a $40 box of factory ammo yesterday, a small piece of me died..
I got on paper with my magneto speed and averaged 2525 with the 147 eldms.

After getting it dialed at 200 yards I shot a 3 round group that measured under an inch, I'm stoked on the accuracy and flawless cycling thus far.
We sent the remaining rounds at a 550 yard gong and my 14 YO nephew effortlessly smacked it every single shot.

It's actually damn quiet without earpro, I'd only wear plugs for extended shooting sessions.

 

[762 ULTRAMAGA]

Another quick update
I got some load development done today with 147s, the only powders I have that work with the CM are n565 and a little Rl 16.
Both powders are shooting tight little groups at 200 yards, cycling is flawless and there's no gas to the face with the Sprinco extra power spring.
I have about 100 rounds through her so far and it's a pleasure to shoot!

Couple pics of 2 shot groups during development, settled on 41.5 grains of RL16 at 2550 fps (final 3 shot group)

 

[232593]

Another quick update
I got some load development done today with 147s, the only powders I have that work with the CM are n565 and a little Rl 16.
Both powders are shooting tight little groups at 200 yards, cycling is flawless and there's no gas to the face with the Sprinco extra power spring.
I have about 100 rounds through her so far and it's a pleasure to shoot!

Couple pics of 2 shot groups during development, settled on 41.5 grains of RL16 at 2550 fps (final 3 shot group)
View attachment 8287914
View attachment 8287915View attachment 8287916

You try STABAL 6.5?

 

[762 ULTRAMAGA]

You try STABAL 6.5?

I just bought a pound to try this weekend, I'm really hoping it works as well as people are saying cuz it's everywhere.
I'll post load updates and group pics

 

[Top O' Texas]

Absolutely
My dies will be here next week and I have a pile of 147 eldms

If you need to seat longer than 2.810-2.830" (depending on which mag is used) a LaRue mag can get out to 2.850-2.865" depending on how the cartridge sits in the mag? Be fore warned their $92 for single buy or $182 for buying 2 at a time.

 

[Top O' Texas]

You try STABAL 6.5?

StaBall Match might be a good fill also? Check Hodgons site for data.

 

[mj23polaris]

How'd 6.5 staball 147s do?