Recent content by MDT_Josh

You're right, but the typical barrel length for most rimfires is in the 16-22" range, and only recently (other than older BR and TR guns) are we seeing shooters adopt 24-28" rimfire barrels. Therefore, we're stuck in a strange spot where we need a shorter forend to accommodate lighter/shorter...

Well we also made it cheaper and lighter 🤷‍♂️ Hopefully we will have them available for purchase soon, and not only in the "kit" format, so that you can plug and play with whichever buttstock you prefer! - Josh

It depends on your barrel profile, but it's likely that you will need to remove your NV Bridges to remove your barreled action. Also, unless you upgrade your buttstock, you will still need to use the LOP spacers to set your buttstock length :( - Josh

I agree with this statement, but I am slightly outnumbered and we have other magazine projects perpetually in the works! - Josh

I am able to tell the difference between Gen 3's, 4's and 5's, but the earlier stuff is a little more unknown to me, however, @kthomas added an easy way to see the difference between a Gen1 and 2! - Josh

I am sure we'd love to have a different avenue for promotion and the transfer of knowledge to the shooter base! YouTube, Facebook, Instagram, etc. can be painful to deal with at best, so I will let @MDT_OFFICIAL roll with it, but it would be awesome to be a part of :) - Josh

Sorry to hear that you're having issues! To be fair, there are a lot of variables to account for in "my magazine isn't feeding, please help me" questions and that is probably why we're having a hard time? So we know the magazine (10 round, 6mm BR), what we do not know is your; Caliber, Action...

Shouldn't be an issue! The only things I could see being potentially problematic is if the pillars in the McMillan are too long/short or if the mag latch in the KMW is long/short, then there might be some misalignment, however, the Zermatt Origin has a lot of forgiveness for feeding so you...

What action are you planning to run these magazines in?

Sorry, I can't say that I have seen any with that colour combo either, but I am sure it would look awesome!

Alternatively, we will have the new ACC Premier Gen2 available soon and the forend is around 2" shorter, meaning you could easily run a suppressed 18" barrel! - Josh

I can't say I have a lot of experience with the CDG, but I would actually guess that the diameter of the action is a *little* on the small side. We have found that some aftermarket actions fit a little "deeper" into our inletting and can cause some fairly strange issues. For the most part, all...

I'm not sure that we're still running that program, but it was all of our brand ambassadors who had discount codes (Jon Pynch, Keith Baker, Scott Satterlee and Matt Hornback). Unfortunately we cannot provide much of a discount on Ckye-Pod's as they are very expensive to produce, so I am not sure...

You're welcome :)

Yes, all of our chassis (other than rimfires) are made with an AICS pattern magazine well!