Latest activity Postings Featured content About Feedback Stats
tomme boy replied to the thread The Ruger American Rimfire.I have the regular 16" model. I put it into a Boyds Prairie hunter stock. It shot like crap before I did it and it still shoots like...- tomme boy replied to the thread RCBS AR sizing die issue.your full length die is screwed in till it touches the shell holder with the ram all the way extended right? run a piece of brass up...
- tomme boy replied to the thread cleaning barrel found this - ideas?.The reason the bore scope caused damage is because you looked at what was in your barrel and proceeded to destroy it by cleaning it with...
- tomme boy replied to the thread Rimfire Scope Recommendations.Arken is a Chinese company. They have front men here handling the shipping and complaints. But they have pushed other companies to get...
- tomme boy replied to the thread White River primers.For the US guys, don't waste your time on these. Once they are gone they are gone for good. They are shipping all of their primers to...
- tomme boy replied to the thread AK for PRS?.I had a 223 AK and it was more accurate than most of my AR15 rifles I have owned. But it was with reloads not the steel cased junk. The...
- tomme boy replied to the thread Help, my 5.56 reloads suck.Armscor ammo is JUNK. Get some Hornady fmj or their sp55gr bullets. They are usually the same price. I can get 1" with my bolt gun easy...
- tomme boy replied to the thread WOA 223 Varmint 1/12 barrel.55 maybe 60 will be your max weight in the AR with a 20" If it was a 26" bolt gun you MIGHT be able to push a 69gr fast enough. My 22"...
- tomme boy replied to the thread Ballistics Advantage barrels question... warranty issue approaching epic fail.I have BCA barrels that shoot better than the 4 BA barrels I had. I have only one left. It shoots ok at best. BA sells a lot of barrels...
- tomme boy replied to the thread I AM F...D.do not cut it out with a dremel
- tomme boy replied to the thread I AM F...D.I chuck the die up in my lathe and cut it out. Find someone that has a lathe near you. You tun it down on the inside to leave just a...
- tomme boy replied to the thread AR10 pulling rim off and marring on brass.nothing in those pics is the problem you re having. All i see is scratches with carbon in them.
- tomme boy replied to the thread AR10 pulling rim off and marring on brass.Your chamber is rough but not the issue you have. The gun is WAY out of time. The bolts is ripping the rim off as the case is still...
- tomme boy replied to the thread Rock Creek Barrels.The marks are from the reamer before the barrel is rifled. It shows what the feed rate the reamer was fed in. Most times the marks are...
- tomme boy replied to the thread New barrel gouged on muzzle.NONE of the defects are going to hurt anything. If they can get you a different barrel let them. Otherwise it will not hurt anything
- Loading…
- Loading…
- Loading…
- Loading…