Update 11/13/23: Trade deal pending with cypriss32
**********
Gentlemen, I acquired this recently and decided to go with a smaller barrel. This was produced by Craddock Precision and I assembled it into an upper with handguard, but is otherwise new, unused and unfired.
Specs:
Length: 24"
Criterion is the blank used
Chamber: 6.5 Creedmoor
Twist: 1-8
Gas length: Rifle gas +2
Journal seat: .936
Weight: 4 pounds, 13 oz
Bead blast finish
It will come with a brand new SLR adjustable gas block (attaches via set screws).
$520 shipped. Lmk if you have any questions. I'm open to trades, but please message me direct for that.
For trade I'm open to..... 6.5mm ARC barrel / upper, the new 22 ARC barrel or upper, Larue scope mounts (OBR, etc), 6mm Creedmoor barrel and / complete upper; Aimpoint optics, Vortex Razor Gen 2 1-6, Minox, SAI, Kahles, zeiss, Swaro, <<< I can add cash where needed.
Edit: for anyone wondering how it will look in an AR10, here's one with an LMT lower, TAC-10 upper and URX 4 (13.5") handguard assembled, for a somewhat SR25 clone-sh look.
Thank you,
JH
tags: Precision Firearms Inc CLE Compass Lake DMR M110 SR25 SR-25 6.5 CM Proof Research Stainless barrel
**********
Gentlemen, I acquired this recently and decided to go with a smaller barrel. This was produced by Craddock Precision and I assembled it into an upper with handguard, but is otherwise new, unused and unfired.
Specs:
Length: 24"
Criterion is the blank used
Chamber: 6.5 Creedmoor
Twist: 1-8
Gas length: Rifle gas +2
Journal seat: .936
Weight: 4 pounds, 13 oz
Bead blast finish
It will come with a brand new SLR adjustable gas block (attaches via set screws).
$520 shipped. Lmk if you have any questions. I'm open to trades, but please message me direct for that.
For trade I'm open to..... 6.5mm ARC barrel / upper, the new 22 ARC barrel or upper, Larue scope mounts (OBR, etc), 6mm Creedmoor barrel and / complete upper; Aimpoint optics, Vortex Razor Gen 2 1-6, Minox, SAI, Kahles, zeiss, Swaro, <<< I can add cash where needed.
Edit: for anyone wondering how it will look in an AR10, here's one with an LMT lower, TAC-10 upper and URX 4 (13.5") handguard assembled, for a somewhat SR25 clone-sh look.
Thank you,
JH
tags: Precision Firearms Inc CLE Compass Lake DMR M110 SR25 SR-25 6.5 CM Proof Research Stainless barrel
Attachments
Last edited:
