- Thread starter Shawn Bevins
- Start date
Do you have any photos of groupings at various ranges?
Sorry mate, I don’t. Furthest I’ve shot with it is out to 840m doing some positional training using crappy 147gr factory ammo. Velocity with that ammo was about 2540fps I think. I’d need to check my book
Missed the question. Factory 16" barrel.
is the Badger Ordinance M40a3-a5 recoil lug compatible with the Field Tactical Chassis?
Last edited:
CPS is pretty much done now. Needs another coat of paint.
Here’s two of my three Cadex builds. Both started life as Cadex’s “Field Open Top” chassis. In years gone by when Cadex first started, these were just the receiver and fore end (no butt stock or hand grip included). Just a bare chassis.
This is a Remington 700 action chambered in .223rem with a 26” 1:8“ twist Benchmark HV barrel.
This is a KS Arms action chambered in 6.5x47L with a 26” 1:8” twist Jury Custom HV barrel.
This is a Remington 700 action chambered in .223rem with a 26” 1:8“ twist Benchmark HV barrel.
This is a KS Arms action chambered in 6.5x47L with a 26” 1:8” twist Jury Custom HV barrel.
16" Barrel? Curious how short of a barrel one can run while still clearing the end of the handguard.
Tell us more about that M200 with the MOUT/Izlid…
This is an 18" barrel with a competition hand guard, so it depends if you're going to thread for a suppressor or not...or which hand guard you actually have.
The sharpie mark on the barrel would be exactly 16" but you wouldn't be able to thread it for a can and still have it shoulder.
Id say with a competition hand guard...16.75 if you want to run a suppressor...16 for a bare muzzle.
Probably 14” for this one
Does anyone sling their Lite Comp rifles here ? Curious if anyone has had any issues with loosening of the rail to the reciever over time . Planning on doing a lot more field excursions where the sling would be beneficial. 
I've ran a sling on mine for 6-8 years and never had an issue. I have the Cadex QD side mount on the front left. Not sure how you're slinging yours if you're using a rail.Does anyone sling their Lite Comp rifles here ? Curious if anyone has had any issues with loosening of the rail to the reciever over time . Planning on doing a lot more field excursions where the sling would be beneficial.
What kind of rifle is under it and what type of top mounted bipod is that?
Not an R7 owner. But I own a Kraken and I inquired to Cadex about running SRP. Basically their wording was as long as your not attempting to run it at warp speeds, you can use SRP. So if you have a load at the ragid edge of preasure, I'd back it off to the next node.
Thanks mate. Will be for a 22" 7SAW barrel. I'll only be running the 150s so should still get solid performance from a slightly lower charge.
