-
Having trouble using the site?
Contact support
Been thinking about doing the same. Want too....but just can’t part with some!!Well, I sold my ARC match rifle this week so I'll be strictly rocking the AI for the foreseeable future. Makes things easier with 1 gun to choose from. Now, my only decision will be dasher, 25cm, 6cm, or 6.5cm barrel.
What pack is this? Thanks
Attachments
If I remember right, it’s a Kifaru Shape Charge with their Sherman pocket mounted. It’s a good pack size for range use.
R-Lock/Arca Dovetail Plate: Accuracy International AX Low Profile
Low Profile R-Lock Dovetail plate for AX, AX AICS rifles and chassis to include Mk13. Fits RRS 1.5" R-Lock Dovetail and Arca-Swiss.
www.sawtoothrifles.com
R-Lock/Arca Dovetail Plate: Accuracy International AX Low Profile
Low Profile R-Lock Dovetail plate for AX, AX AICS rifles and chassis to include Mk13. Fits RRS 1.5" R-Lock Dovetail and Arca-Swiss.
Awesome, that means the one I back ordered 3 days ago should ship soon. Thanks
USCG placed 4th last year
2018 9th
2017 3 rd
taskandpurpose.com
2018 9th
2017 3 rd
The Coast Guard has better snipers than the freakin' Marine Corps
Marine snipers are considered amongthe most elite hunters of men in the U.S. military with Hollywood movies and countless books dedicated to them, and
taskandpurpose.com
16” .308 bbl with 175gr OTMs traveling at 2470fps. 12.5mils to 1k. 2-2.2mils of windage. Loving the 338 Ultra
.223 AI Bolt
.223 AI Bolt
If .223 is ever available to average Joes like me for AXMC or AXSR......I would definitely expedite purchasing one finally.
Are these only for AI SA?
Any word or info on a .223 bolt for AXMC or AXSR?
Ah the good ole 7.62x51mm mortar system. Nothing like a lil close range indirect fire support when you need it!
Definitely makes me appreciate wind calls with 6.5/6mm
I think even on that stuck container ship we'd get them faster then what is actually going to happen!
thats the funniest post ive seen in a while!
@trophyhunter came out with it first and sold the design to Bugholes. Bugholes was going to offer them to the public, but decided to stand down because AI is supposed to do it soon and bugholes is to busy apparently
Accuracy International 223 conversion working
Just curious, what are the specs on the barrel you're running? @trophyhunter Mine ? I currently have 2, a 26” Bartlein 1-7 twist heavy Palma and a 26” Bartlein 1-7 M24 in 223 Ackley Improved
www.snipershide.com
Half the hide will die of old age before a 223 bolt gets released 
And the other half will live long enough to see themselves fill the Golden Corral on Jello night after a long day of being an RO at the neighborhood public range.Half the hide will die of old age before a 223 bolt gets released
Brother, if that’s what my 60’s has in store, I’m gonna be a happy man
For you guys who have enough machinist knowledge.......
Could a .223 bolt be made for an axmc or axsr?
I know this is a pipedream ........but it's a dream I've always had (even put together some builds in my head and on paper before that actually will shoot. 223 through .338LM.)
With the new David Tubb XC calibers.........an AXMC or AXSR setup and a .223 bolt.......shooting .223 through. 37XC or even .41XC could be done off ONE rifle.
Yes I realize this doesn't appeal to everyone......and trust me just with the small amount of rifles and suppressors I have so far....if money wasn't an issue I'd have a rifle in every caliber I wanted with whatever optic I wanted and a suppressor on every one......zeroed and ready to rock and roll.
However having the same chassis, same trigger and same optic with same cheek weld EVERY time is VERY appealing to me.
Those who think this could be done please chime in
Could a .223 bolt be made for an axmc or axsr?
I know this is a pipedream ........but it's a dream I've always had (even put together some builds in my head and on paper before that actually will shoot. 223 through .338LM.)
With the new David Tubb XC calibers.........an AXMC or AXSR setup and a .223 bolt.......shooting .223 through. 37XC or even .41XC could be done off ONE rifle.
Yes I realize this doesn't appeal to everyone......and trust me just with the small amount of rifles and suppressors I have so far....if money wasn't an issue I'd have a rifle in every caliber I wanted with whatever optic I wanted and a suppressor on every one......zeroed and ready to rock and roll.
However having the same chassis, same trigger and same optic with same cheek weld EVERY time is VERY appealing to me.
Those who think this could be done please chime in
Let’s state this correctlyHalf the hide will die of old age before a 223 bolt gets released
“half the hide will die of old age before a 223 bolt gets released...from AI”
“I’m your huckleberry” -For you guys who have enough machinist knowledge.......
Could a .223 bolt be made for an axmc or axsr?
I know this is a pipedream ........but it's a dream I've always had (even put together some builds in my head and on paper before that actually will shoot. 223 through .338LM.)
With the new David Tubb XC calibers.........an AXMC or AXSR setup and a .223 bolt.......shooting .223 through. 37XC or even .41XC could be done off ONE rifle.
Yes I realize this doesn't appeal to everyone......and trust me just with the small amount of rifles and suppressors I have so far....if money wasn't an issue I'd have a rifle in every caliber I wanted with whatever optic I wanted and a suppressor on every one......zeroed and ready to rock and roll.
However having the same chassis, same trigger and same optic with same cheek weld EVERY time is VERY appealing to me.
Those who think this could be done please chime in
Guys, we are moving forward on this. We have been struggling keeping up with parts sales and Gunsmithing since last fall, considering our new current market circumstances.
So if you could be patient, we will have something to deliver.
I've told a few guys we were laying off the project due to a recent AI "announcement", but I've never gotten anywhere sitting around waiting for someone else to do something. So we are moving forward...
-Greg
So if you could be patient, we will have something to deliver.
I've told a few guys we were laying off the project due to a recent AI "announcement", but I've never gotten anywhere sitting around waiting for someone else to do something. So we are moving forward...
-Greg
“I’m your huckleberry” -
Oh boy....I'm in for one too for the axmc
Listen, there's a reason I lost 200lbs of fat....I beat diabetes and obesity, I'll beat this too.Half the hide will die of old age before a 223 bolt gets released
What mags are you running .223 out of?
Would whatever mag fits in SA AX's fit in AXMC mag adapter?
Also.....
If anyone has an axmc mag adapter they want to part with so I can text various .223 mags hit me up
If anyone has an axmc mag adapter they want to part with so I can text various .223 mags hit me up
Best news of 2021.
From a match 2 weekends ago. Super dusty and it managed to lock up my comp trigger. Luckily it didn't lock up during the match but when I got home and started to clean it.
Similar threads
