Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I have a Rem. 700 long action that was originaly a .270 Win. I have been looking into making it into a .338 LM but am having a little trouble in finding what exactly I need to Modify on the reciver. Is there any company that dose this type of work. Thanks
Just acquired a rifle chambered in 338 Lapua Magnum Ackley Improved (40 degree shoulder). Rifle was chambered by Longshot rifles. The previous owner was borrowing dies from a friend, so they didn't come with the rifle. Anyone have an idea where I could find these? I've tried Hornady and...
FYI www.accurateshooter.com reports Midway and Graf's has .308 Lapua brass in stock. $73.00 per 100 OUCH! But I guess if you got to have it you'll have to pay the price. Danny
Lapua 243 was historically the best bang for the buck. Now that it's risen to basically the same price as Norma / Nosler 260 Remington, is that still the case? Mike
im looking into having one tactical rifle built. now that Mcrees is also available in europe i can think about this. I was looking at these two calibers, i love the 6.5mm calibers and im after launching 139scenars. the 6.5x55 will probably allow for 120ft/s more velocity but requires a long...
Trying to decide on what to chamber my rifle with. Pro's cons of each? I was going to get .260 but powder valley was out of stock of uncoated bullets. Made me think of .243. Pros? Cons? The intended use of this will be competition to 1K.
I picked up a nice Sako trg-s in 338 win mag. I was wondering what would be involved in converting it to 338 Lapua. Would you just need to ream the chamber or is there more to it? I'm not a gunsmith as you can tell. hunter
Does any one have the brass dim for reloading the .338 Lapua? I am having a hard time finding a sketch of the brass with tolerances. Any help would be appreciated.
Hey fellas Im going to pick up my surgeon remedy tommorow.I've broke in several other smaller rifles but never a .338 lapua. What's the best break in method for a 28" 9.5 krieger?
I did do the usual search on this subject but I did not really find an answer to my question. How often do the regular vendors receive shipments of .308 Lapua brass? As with everything else it appears to be out of stock everywhere, and I am sure there are backorders that will be filled with...
Hey fellas, Looking to run some ladders for the following bullets: 105 Amax 105 VLD 107 SMK 115 VLD If anyone has published Min/Max loads for H4350, I would be much obliged. Thanks much.
Heya guys im thinking of building a new lr rifle and im pretty impressed so far with the ballistics of the 338 lapua and recently learned that remington makes a 700 version of it. Anyone have anything to chime in and help me out here? Is it a good gun, any info about it would be greatly...
I just purchased some new .308 lapua brass I was going to run it through my Lee collet neck sizer because some of the cases are dinged around the case mouth. As I started I noticed when the case hits the decap mandrel it sticks and gets rough, some very bad I even smashed the neck of one then I...
Just want to know if there is any potential problems with doing this...? A buddy and I shot some 6x47 Swiss Match through my 6x47L yesterday, and got a 1 inch drop in POI at 600yds vs the Lapua brass we were shooting... Don't even know load info, velocities or anything at this time... just...