• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

D Cell (1.4375x20) to 3/4x20 mount anyone make one?

BenSe

Private
Minuteman
Jan 20, 2023
1
0
Mount Perry, Ohio
Hey guys, I built a form 1 suppressor with a steel monocore and titanium tube and end caps a few years ago. Works great on my 6.5 creedmoor. I just built a new 300 PRC and the pre-fit from NSS came threaded 3/4x24. I can't seem to find a direct thread mount to go from 3/4x24 to the 1.4375x20 threads anywhere. I don't wanna try to drill and tap one myself, without a lathe I'm sure I'd have concentricity issues, and my local machine shops get antsy if you mention or it looks like a firearm component (don't blame them). I saw some adapters and going to a hub mount and back that would work. But was trying to avoid adding anymore adapters/ failure points if possible. Thanks for any help!

Ben
 
That's D cell size. Search for a d-cell direct thread adapter, or join the f1 type boards. I doubt you'll find one here if it's not made by CGS, TBAC, LPM, 419
 
Same here: