Gunsmithing LRI_PTG

LRI · Mar 18, 2019

Notice:

From this day forward LRI will no longer order any tooling or parts sourced from Pacific Tool and Gauge.

Customer supplied tooling/parts will still be used with the understanding that any/all issues originating from it are the clients sole responsibility.

Please make a note.

BurnOut · Mar 18, 2019

Interesting... there has to be a story here (though I won't be so gauche as to ask what it is); per the LRI website, PTG was the primary source of your reamers.

Hopefully you'll be able to quickly find another source for what you need.

_Windrider_ · Mar 18, 2019

From what I used derstand, quality control has taken a turn for the worse.

MarinePMI · Mar 18, 2019

TacticalDillhole said:
From what I used derstand, quality control has taken a turn for the worse.

Yep. That's pretty much what I posted to LRI's FB version of this announcement. The have fallen quite a bit in their products and service over the past several years.

Makes me wonder if Chad is just going to start making reamers himself...not a bad thing at all in my mind.

_Windrider_ · Mar 18, 2019

MarinePMI said:
Yep. That's pretty much what I posted to LRI's FB version of this announcement. The have fallen quite a bit in their products and service over the past several years.

Makes me wonder if Chad is just going to start making reamers himself...not a bad thing at all in my mind.

It’s always true, you want something done right, do it yourself.

50rod · Mar 18, 2019

LongRifles Inc. said:
Notice:

From this day forward LRI will no longer order any tooling or parts sourced from Pacific Tool and Gauge.

Customer supplied tooling/parts will still be used with the understanding that any/all issues originating from it are the clients sole responsibility.

Please make a note.

Agreed! I haven’t ordered a reamer from them in years. I still use one of there recoil lugs every now and then but reamers are from Manson or JGS.

Ledzep · Mar 18, 2019

I like Manson for reamers. Not sure if he'll do your fancy carbide stuff.

PTG I think has been a dumpster fire of a business for a while. From everything I've seen on the net, it might make for some History/Discovery channel reality TV.

Threadcutter308 · Mar 18, 2019

Ledzep said:
I like Manson for reamers. Not sure if he'll do your fancy carbide stuff.

PTG I think has been a dumpster fire of a business for a while. From everything I've seen on the net, it might make for some History/Discovery channel reality TV.

Jibes with my experience with PTG. Too bad they don't care enough to fix their problems. Don't waste your time writing or calling Kiff, unless you like listening to crickets.

50rod · Mar 18, 2019

Ledzep said:
I like Manson for reamers. Not sure if he'll do your fancy carbide stuff.

PTG I think has been a dumpster fire of a business for a while. From everything I've seen on the net, it might make for some History/Discovery channel reality TV.

i love my carbide reamers, cut like butter!

Mgordon · Mar 20, 2019

We have struggled with them over the years too and did the same thing. Doesn't matter if its a physical product or just getting an order entered in correctly, its rarely right.

50rod · Mar 20, 2019

Do you know where else to get quality range rods and bushings?

m6z · Mar 21, 2019

I placed an order for a couple of strait & threaded bolt handles a few weeks ago. With the negativity of this thread I'm wondering if I will ever see them.

GhostFace · Mar 21, 2019

I take it that Manson or clymer can make a .30-06 Serengeti reamer? It’s not proprietary to PTG? Also does anyone else make one piece bolts for the 700 as a stand alone item besides PTG? I’m Just trying to get a plan of action for my next build.

derek1ee · Mar 21, 2019

GhostFace said:
I take it that Manson or clymer can make a .30-06 Serengeti reamer? It’s not proprietary to PTG? Also does anyone else make one piece bolts for the 700 as a stand alone item besides PTG? I’m Just trying to get a plan of action for my next build.

mackbros?

Wannashootit · Mar 21, 2019

If you can provide a print, it can certainly be made. Clymer? I don't think they even make piloted bushing reamers- only solid- don't they?

FUNCTIONAL · Mar 22, 2019

50rod said:
Do you know where else to get quality range rods and bushings?

Any reason you want range rods? Long stem indicator has worked better and more consistent for me than range rods.

JGS makes bushings for their reamers, never used Manson but I'd be a little suprised if they didnt.

Easy_E · Mar 22, 2019

FUNCTIONAL said:
Any reason you want range rods? Long stem indicator has worked better and more consistent for me than range rods.

JGS makes bushings for their reamers, never used Manson but I'd be a little suprised if they didnt.

Range rods are easier to get the barrel close then switch to the long stem indicator to finish at least for me.

Rthur · Mar 22, 2019

Wannashootit said:
If you can provide a print, it can certainly be made. Clymer? I don't think they even make piloted bushing reamers- only solid- don't they?

This page will answer your question:
http://www.clymertool.com/chambering-reamers/

R

Supersubes · Mar 22, 2019

Don’t forget JGS.

I spoke with a clymer rep at SHOT a few years ago. Maybe their stuff works, but it sure seemed to me like they didn’t care for special order stuff.

AIAW · Mar 22, 2019

50rod said:
i love my carbide reamers, cut like butter!

They might cut like butter but that's no good if they are off spec. That just means you easily cut a F'ed chamber.

50rod · Mar 22, 2019

FUNCTIONAL said:
Any reason you want range rods? Long stem indicator has worked better and more consistent for me than range rods.

JGS makes bushings for their reamers, never used Manson but I'd be a little suprised if they didnt.

I use range rods to get it close before I go to my long indicator. Get it within a thou then switch, makes things faster for me.

50rod · Mar 22, 2019

GhostFace said:
I take it that Manson or clymer can make a .30-06 Serengeti reamer? It’s not proprietary to PTG? Also does anyone else make one piece bolts for the 700 as a stand alone item besides PTG? I’m Just trying to get a plan of action for my next build.

These guys are making a really nice aftermarket 700 bolt. I went to there booth at show show this year. Comes complete, don’t need to buy each piece seperatly. Price is great also! https://macbros.com/remington-700-bolt-upgrade/

50rod · Mar 22, 2019

AIAW said:
They might cut like butter but that's no good if they are off spec. That just means you easily cut a F'ed chamber.

So your saying carbide reamers cut out of spec?

AIAW · Mar 22, 2019

50rod said:
So your saying carbide reamers cut out of spec?

Oh no, just that PTG reamers have been known to be. Not all of them, but some in the past. QA and QC have taken a hit over the years sadly.

CHADPEZZLE · Mar 22, 2019

50rod said:
So your saying carbide reamers cut out of spec?

I think he's saying PTG reamers have a reputation of cutting out of spec. Rather use HSS reamer that cuts correctly than a carbide one that doesn't.

FCrifles · Mar 22, 2019

Dave Manson is absolutely great to deal with. JGS is good too. It's a plus having Manson local to me. Everytime i have needed something in a hurry they are more than helpful and the specs are right.

50rod · Mar 22, 2019

The only carbide reamers I use (and know of) are JGS. Man they are expensive but if your doing a lot of that cartridge then it’s worth it. I have a lot of Manson reamers also, great tools!

shoot4fun · Mar 22, 2019

Been trying for two years to get the reamer print for my PTG 243 reamer.
Dave said he sent it to my email at least three times. I asked which one because he has neither.

DAVETOOLEY · Mar 23, 2019

Easy_E said:
Range rods are easier to get the barrel close then switch to the long stem indicator to finish at least for me.

Just get a pin gage .0005" under bore diameter.
Manson and JGS GTG

50rod · Mar 23, 2019

DAVETOOLEY said:
Just get a pin gage .0005" under bore diameter.
Manson and JGS GTG

Yes sir, I’ve done that on calibers that I don’t have range rods for.

Watch Out for Scammers!

Gunsmithing LRI_PTG

Lance Criminal

DDOJSIOC

Shiner of shoes

Ban Cat Handler

Shiner of shoes

Weber Customs

Bullet Engineer

Mr. Sugar Tits to you

Weber Customs

Gunny Sergeant

Weber Customs

Private

Verified Asshole

Private

Gunny Sergeant

Dirty Civilian

Sergeant

Philomath

Heathen

★★★★★

Weber Customs

Weber Customs

Weber Customs

★★★★★

Private

formerly eddief

Weber Customs

Gunny Sergeant

Gunny Sergeant

Weber Customs

Similar threads