Latest activity Postings Featured content Achievements About Feedback Stats
- WWannashootit replied to the thread Upgrade my 7mm WSM Barrel or Drop $$$ into a 7mm PRC.Even light sporter contour barrels can be threaded for a muzzle device. With minimal shoulder, an adapter can be fixed in place with...
- WWannashootit replied to the thread Does my gunsmith suck?.This was the first thing I noticed... what the actual fuck is that?? I use a narrow grooving tool when I need a relief cut, and go maybe...
- WWannashootit replied to the thread New Rifle Build - 6.5 PRC or 300 WSM.. or others?.The PRC is ballistically similar to the 6.5 Swede and the 6.5 x .284. At extended ranges, the WSM is going to deliver more energy than...
- WWannashootit replied to the thread Savage 10 300 wsm not ejecting.That looks fucked-up. Here's a pic of what the CRF bolthead should look like, your receiver should be as I mentioned above- or you have...
- WWannashootit replied to the thread Savage 10 300 wsm not ejecting.You must have one of the old staggered-feed receivers used for the WSM's and UltraMags which used CRF instead of push-feed if there's no...
- WWannashootit replied to the thread JTAC Ranch Closing!.Made the last trip yesterday with my son, got the email today. Said there's an LOI to purchase the land, but I'm sure that's contingent...
- WWannashootit replied to the thread Gunsmithing 1.25” shank with 1.125 action threads….Partially correct. The shoulder is what allows you to achieve (when done properly) perfect alignment and perpendicularity of the barrel...
- WWannashootit replied to the thread Gunsmithing 1.25” shank with 1.125 action threads….His concern is that you have 1/2 the shoulder area contact that you'd have with a "standard" 1.062 major diameter on the typical 1.35...
- WWannashootit replied to the thread Gunsmithing Best Muzzle thread Size straight taper barrel.This. Ain't many brakes full 1-1/4" diameter. Having a brake with a diameter smaller than the shoulder looks fucked up. I like Holland's...
- WWannashootit replied to the thread Gunsmithing 1/2x28 for .243/6mm???.What T-Rex said. Not a bad idea, but not ideal, either. If you can go 5/8", and still have adequate shoulder- do it. To me, "adequate"...
- WWannashootit replied to the thread Gunsmithing Can you Duracoat/Ceracoat anodized Aluminum?.10 year old thread, but... I use an airbrush more than the HVLP gun. HVLP only when I'm doing large items such as stocks. Airbrush is...
- WWannashootit replied to the thread Gunsmithing Can i get an opinion on this bedding job.Small air bubble voids in a bedding job are cosmetic and inconsequential. You say you "had it bedded but could never get it to shoot"...
- WWannashootit replied to the thread Do you know this reamer??.Are you using a comparator to set your seating depth/jump? "Match" reamers usually have extended freebore.
- WWannashootit replied to the thread JTAC Ranch Closing!.Well, this REALLY sucks... no place to shoot ELR anywhere in the state now. Often had the precision range literally to ourselves, no...
- Loading…
- Loading…
- Loading…
- Loading…
- Loading…
