• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Tikka T3 Thread

I have the AO swept handle on this rifle. I've owned the Sterk one as well, but I prefer the AO. It has less of sweep to it and seems just as good quality.
 

Attachments

  • 20230208_211530.jpg
    20230208_211530.jpg
    679.7 KB · Views: 139
  • Like
Reactions: 260284
Does anyone know if the AO option works with the Area419 knob? As much as I love Sterk swept handles, I use the 419 knobs on my 457s and find it has a similar feel to the oem ones on my ARC actions. Just worried that the AO handles are too wide before the threaded part for a seamless transition. If I could, I'd definitely opt for a straight handle with a 419 knob, or even better, one of the ARC ones.
 
Does anyone know if the AO option works with the Area419 knob? As much as I love Sterk swept handles, I use the 419 knobs on my 457s and find it has a similar feel to the oem ones on my ARC actions. Just worried that the AO handles are too wide before the threaded part for a seamless transition. If I could, I'd definitely opt for a straight handle with a 419 knob, or even better, one of the ARC ones.
The AO uses R700-thread knobs. If they have an option for the R700, then it will fit.
 
  • Like
Reactions: Northernjets
22.7

about 22.7 grains of IMR 8208-XBR ?
Went with the higher 23.4 node on these but I know 22.7 is a popular one as well. Around 2.360” COAL. Average speed was right at 2860 on a brand new barrel so I think 2950-3k will be attainable before it’s all said and done.
 
  • Like
Reactions: ma smith
Which rails with a recoil lug would you all recommend?
I have a brand new MTN Tactical I’ll sell if you want, it has an integrated recoil lug.

The 419 rail I have on one of my other rifles is not integrated, it’s a separate pin. Both do the job just fine.
 
Area 419 is nice and low but I prefer the factory CTR the best
Others are way too high
 
  • Like
Reactions: Hondo1
This Krieger is insane, never had barrel that is this so accurate.
Scenar 123gr 139gr and 136gr Scenar-L all are working like a lazer beam.
5-shot´s at 100-meters.
It can do this type of groups with all the Scenar´s.
I have shot about 100 pills thru the barrel, no breaking in, just let it go.
Awesome quality on Krieger.
IMG_20230216_172351_edit_24885666819985.jpg
 
For those with a tikka in a krg/whiskey 3 (if it matters)

What mags does the setup prefer? I notice my pmag is not inserting fully. I’ve read mdt polymers do fit unmolested?

If steel, do tikkas have a preference for binder plate or not?

I do not care about loading long, I care about smoothest loading possible. My generic load is 2.8 flat so binders or not is whatever
 
For those with a tikka in a krg/whiskey 3 (if it matters)

What mags does the setup prefer? I notice my pmag is not inserting fully. I’ve read mdt polymers do fit unmolested?

If steel, do tikkas have a preference for binder plate or not?

I do not care about loading long, I care about smoothest loading possible. My generic load is 2.8 flat so binders or not is whatever
I've run accurate mags and they are well built. I also have pmags and confirm they don't fit. KRG label mags are rumored to be accurate OEM.
 
For those with a tikka in a krg/whiskey 3 (if it matters)

What mags does the setup prefer? I notice my pmag is not inserting fully. I’ve read mdt polymers do fit unmolested?

If steel, do tikkas have a preference for binder plate or not?

I do not care about loading long, I care about smoothest loading possible. My generic load is 2.8 flat so binders or not is whatever
Plastic pmags dont work with Tikkas unless you modify the feed lips area. That is because of the mag action interaction and not dependent on the chassis or stock. Modifying weakens them and makes them more likely to break. I don't think they're worth it.

I bought the KRG mags and they work. Remember the mag well area is adjustable on the Whiskey.
 
  • Like
Reactions: DangerRanger
My go to mags for 6.5 Creed in my Tikka Xray are steel MDT 12rd w/binder plate. I've ran thousands of rds thru those in field conditions and have not had a single feeding issue.
 
Hi all, just picked up a T3 in a KRG X-ray chassis, trying to install a KRG flush cup to the rear of the stock but it’s bigger than the hole that appears to be cut out for it, any tips, or am I missing something ridiculously obvious?
 
There is QD cup all ready on the rear stock.
XRY-B012.jpg

XRY-D05.jpg
Well now I feel like a moron! I assumed that was a placeholder to mount the qd cup if you needed it, couldn’t find mention anywhere that it was already fitted. I’ll fit this one to the spigot instead then, thanks.

Absolutely love your builds by the way, inspirational 👍
 
thanks all I’m gonna snag some metal mdt without a binder soon. In the meantime since family is home sick I grabbed the vise and files and the pmag works now too
1C22A4A4-FF66-4933-9DD6-EA5904F0BC11.jpeg35EEF52A-CA3D-456B-B463-C66EC5665C37.jpeg
 
Anyone have a line on a spare Safety lever and Safety lever spring? (kinda Horseshoe/D shaped one)
 
Well now I feel like a moron! I assumed that was a placeholder to mount the qd cup if you needed it, couldn’t find mention anywhere that it was already fitted. I’ll fit this one to the spigot instead then, thanks.

Absolutely love your builds by the way, inspirational 👍
Good thing you asked, instead of taking out the dremel....
 
Tikka t3x Varmint in 6.5cm MDT XRS
The problem I'm running into is mag selection.
I know the pmags don't work without grinding the crap out of them, (which I did on this one) but what about MDT metal mags?
My hand loads are 2.930 oal so I want to get a 10 Rd metal mag w/o binder plate that doesn't need to be modified.

PXL_20230208_164352724.jpg
 
Rumour has it the AT-X is comin with a Tikka footprint and a double stack mag box.

At least if you are Canadian (y) :ROFLMAO:
 
IMHO, there is nothing wrong with the TIkka CTR mags, and I'm unsure why so many people work very hard at finding an excuse not to use them, especially in 308 and 6.5/6 Creedmoor.
I don't think it's so much that people "work very hard at finding an excuse not to use them" as much as there are zero aftermarket chassis cut for them aside from the bravo, not everyone wants to run a stock, and some folks want mag compatibility with other non-Tikka rifles. Objectively, CTR mags are great, but that doesn't mean they are always the most sensible or feasible option.
 
I don't think it's so much that people "work very hard at finding an excuse not to use them" as much as there are zero aftermarket chassis cut for them aside from the bravo, not everyone wants to run a stock, and some folks want mag compatibility with other non-Tikka rifles. Objectively, CTR mags are great, but that doesn't mean they are always the most sensible or feasible option.
... and if you do want to run a stock, the CTR bottom metal isn't as pretty to look at, as some aftermarket options

:cool: 🤣
 
Any chance anyone here knows when the left handed T3x RoughTechs in either 7 Rem Mag or 300 Win Mag will hit the shelves? Or if anyone is willing to offload a left handed rifle with a magnum bolt face... hit a brother up. I've looked everywhere and even called Beretta, who said they aren't importing them.... but they couldn't/wouldn't give a timeframe for when the lefties will hit the shelves. Other option is to get the left handed T3X in stainless, but it's going to be run suppressed and those barrels are too thin to thread in 5/8x24, so that'll get interesting. I'd just much rather get the RoughTech from the jump to negate having to do all the aftermarket stuff on the back end.
 
Any chance anyone here knows when the left handed T3x RoughTechs in either 7 Rem Mag or 300 Win Mag will hit the shelves? Or if anyone is willing to offload a left handed rifle with a magnum bolt face... hit a brother up. I've looked everywhere and even called Beretta, who said they aren't importing them.... but they couldn't/wouldn't give a timeframe for when the lefties will hit the shelves. Other option is to get the left handed T3X in stainless, but it's going to be run suppressed and those barrels are too thin to thread in 5/8x24, so that'll get interesting. I'd just much rather get the RoughTech from the jump to negate having to do all the aftermarket stuff on the back end.
What can do you have? Thunderbeast does a face mount cb brake. It's big enough for a 9/16 thread.
20211010_124725.jpg
 
Hey all, new guy here. Just want to thank everyone who contributed to this thread and the numerous other threads that helped me decide on ordering a Tikka CTR. I've been looking to get into PRS for a few years but the ammo crunch put the brakes on that. This will be my first bolt action rifle and I'm very excited. I'll continue lurking in the shadows, as I don't really have anything to contribute at this point, other than the occasional stupid question
 
Hey all, new guy here. Just want to thank everyone who contributed to this thread and the numerous other threads that helped me decide on ordering a Tikka CTR. I've been looking to get into PRS for a few years but the ammo crunch put the brakes on that. This will be my first bolt action rifle and I'm very excited. I'll continue lurking in the shadows, as I don't really have anything to contribute at this point, other than the occasional stupid question
Everybody else has already posted pics of their Tikkas :cool: 🤣

I've been told by people with titles like Colonel or Ambassador that There Ain't No Such Thing As A Stupid Question.
 
Another new guy here. I’ve been lurking here for about 6 months. I’ve read this whole thread along with threads on Ruger, Christiansen, Bergara, and others. After all of my research I went with Tikka CTR. Since this thread is best with pictures, here it is.
Tikka CTR, 6.5 cm, 24”
Burris XTR 3.5X18X50
Harris bipod
Area419 Hellfire brake.
 

Attachments

  • D6706AF3-1D60-40E8-92D2-F5B11DEDB255.jpeg
    D6706AF3-1D60-40E8-92D2-F5B11DEDB255.jpeg
    691 KB · Views: 106
Last edited:
Oh boy we got a tight one, wouldn’t want my first tikka full build to be an easy one though would we
E2C54D73-8188-4F79-9FF9-FFC54C919394.jpeg
 
Oh boy we got a tight one, wouldn’t want my first tikka full build to be an easy one though would we
View attachment 8081037
How long have you let it soak with Kroil / PBlaster, etc. ?
Heat Cycles ?

Heat the receiver right at the threads, preload the cheater pipe on the action wrench and bump the end of the wrench with a heavy hammer.
That's how the last on came off.
 
  • Like
Reactions: DangerRanger