I was in dicks and they had a few rem adl's for sale very cheaply. I thought about picking one up for the action. I don't know anything about an adl. Can I take the action and build a dbm rifle?
Can a rem 700adl be turned into a dbm?
- Thread starter sch2046
- Start date
Re: Can a rem 700adl be turned into a dbm?
Yup, you just need a BDL stock and one of the various DBM bottom metals. Keep in mind that not all are drop-in's, depending on which stock and which bottom metal you go with, so the stock may need to be inletted for the particular bottom metal you want to use. Also keep in mind the screw spacing on the bottom metal.
There's also chassis style stock too, many of which have a DBM bottom metal built right into it.
Yup, you just need a BDL stock and one of the various DBM bottom metals. Keep in mind that not all are drop-in's, depending on which stock and which bottom metal you go with, so the stock may need to be inletted for the particular bottom metal you want to use. Also keep in mind the screw spacing on the bottom metal.
There's also chassis style stock too, many of which have a DBM bottom metal built right into it.
Re: Can a rem 700adl be turned into a dbm?
Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure...
Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure...
Re: Can a rem 700adl be turned into a dbm?
I could be wrong, but I don't believe that there is any difference between the ADL and BDL action.
You can convert and ADL to a BDL simply by buying the a BDL stock and the BDL kit from brownells, so that leads me to believe that the actions are the same.
I could be wrong, but I don't believe that there is any difference between the ADL and BDL action.
You can convert and ADL to a BDL simply by buying the a BDL stock and the BDL kit from brownells, so that leads me to believe that the actions are the same.
Re: Can a rem 700adl be turned into a dbm?
no difference between the actions...just one has a floor plate the other does not.
no difference between the actions...just one has a floor plate the other does not.
Re: Can a rem 700adl be turned into a dbm?
Thanks guys, I think I am buying a cheap remington and throwing everything away but the action.
Thanks guys, I think I am buying a cheap remington and throwing everything away but the action.
Re: Can a rem 700adl be turned into a dbm?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure... </div></div>
What Action Modification is required?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure... </div></div>
What Action Modification is required?
Re: Can a rem 700adl be turned into a dbm?
If you go with factory mag boxes, Remington makes different ones for the ADL and the BDL.
If you go with factory mag boxes, Remington makes different ones for the ADL and the BDL.
Re: Can a rem 700adl be turned into a dbm?
Cheapest way is buy a m5 bottom metal from stocky stocks and find a take off hs Presicion stock from a 700 police and inlet it.There all over eBay. Good setup for cheap
Cheapest way is buy a m5 bottom metal from stocky stocks and find a take off hs Presicion stock from a 700 police and inlet it.There all over eBay. Good setup for cheap
Re: Can a rem 700adl be turned into a dbm?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pawprint2</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure... </div></div>
What Action Modification is required?</div></div>
If I recall correctly, it's just a feed ramp that needs the modification.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pawprint2</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure... </div></div>
What Action Modification is required?</div></div>
If I recall correctly, it's just a feed ramp that needs the modification.
Re: Can a rem 700adl be turned into a dbm?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sch2046</div><div class="ubbcode-body">I was in dicks and they had a few rem adl's for sale very cheaply. I thought about picking one up for the action. I don't know anything about an adl. Can I take the action and build a dbm rifle? </div></div>
Yes, I bought ADLs at Dick's on sale and dropped them into McRee's chassis and then off to the races.
The cheaper option is to buy a used 700 5R take off stock here for 200. Send it to Badger for M5 dbm inlet 100 and buy the PTG bottom metal for about 100. Slap it together and you are good to go.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sch2046</div><div class="ubbcode-body">I was in dicks and they had a few rem adl's for sale very cheaply. I thought about picking one up for the action. I don't know anything about an adl. Can I take the action and build a dbm rifle? </div></div>
Yes, I bought ADLs at Dick's on sale and dropped them into McRee's chassis and then off to the races.
The cheaper option is to buy a used 700 5R take off stock here for 200. Send it to Badger for M5 dbm inlet 100 and buy the PTG bottom metal for about 100. Slap it together and you are good to go.
Re: Can a rem 700adl be turned into a dbm?
I've done two of these,no mods what so ever to the ADL action except bottom metal.
I've done two of these,no mods what so ever to the ADL action except bottom metal.
Re: Can a rem 700adl be turned into a dbm?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pawprint2</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure... </div></div>
What Action Modification is required?</div></div>
If I recall correctly, it's just a feed ramp that needs the modification. </div></div>
It's not 100% necessary- if you're using short pills (for example in my 308 I didn't need to touch feed ramps until I started loading over 2.85 OAL). The longer ones would sometimes bind (the feed ramp over hang mag length by ~1/64"- most likely to instillation error (my bad)) and required me to take a dremil and cut a notch into the bottom of the action for the pills to feed thru. I can post a picture if you'd like to see exactly what I'm talking about. (BTW mine was an ADL originally)
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pawprint2</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yes, the only limiting factor is your budget.
The easiest would be to use factory remington dbm, probably the cheapest.
If you go with a AI type mag, you'll need to modify the action in addition to the stock.
I'd think the ADL stock could be inlet for a Badger type bottom metal but not sure... </div></div>
What Action Modification is required?</div></div>
If I recall correctly, it's just a feed ramp that needs the modification. </div></div>
It's not 100% necessary- if you're using short pills (for example in my 308 I didn't need to touch feed ramps until I started loading over 2.85 OAL). The longer ones would sometimes bind (the feed ramp over hang mag length by ~1/64"- most likely to instillation error (my bad)) and required me to take a dremil and cut a notch into the bottom of the action for the pills to feed thru. I can post a picture if you'd like to see exactly what I'm talking about. (BTW mine was an ADL originally)
Re: Can a rem 700adl be turned into a dbm?
AS with most of the replys, yes an ADL can be dropped into a BDL style stock. I have done one LA ADL to BDL for a hunting rifle. I have also bought 2 SA ADL's from Academy for $411 out the door and rebarreled them both. One I put in a Mcree chassis and the other in a HS M24 stock. If you are going to be loading you bullets long you will need to dremil out the feed ramp just in the middle for the bullet to ride up through. There is a difference between the two action though. The ADL action is drilled for the internal box magazine screw but is not used on a BDL. If you use the ADL box magazine you will need to shorten about 3/16".
AS with most of the replys, yes an ADL can be dropped into a BDL style stock. I have done one LA ADL to BDL for a hunting rifle. I have also bought 2 SA ADL's from Academy for $411 out the door and rebarreled them both. One I put in a Mcree chassis and the other in a HS M24 stock. If you are going to be loading you bullets long you will need to dremil out the feed ramp just in the middle for the bullet to ride up through. There is a difference between the two action though. The ADL action is drilled for the internal box magazine screw but is not used on a BDL. If you use the ADL box magazine you will need to shorten about 3/16".
I couldn't resist reopening this old thread with:
"Member" since 2014. 6 posts. One being a retarded necro.I couldn't resist reopening this old thread with:
Nothing to see here. Move along.
For another 150$, you can get a KRG Bravo stock that has the mag well and release built in.I couldn't resist reopening this old thread with:
