want to use a flush cup hole to mount a rail for a laser. anybody make one?
- Thread starter fastford
- Start date
Re: anybody make pic rail that can mount in flush cup
I don't see how that would work well if you wanted the laser to actually point the same direction. One of the benefits of flush cups is that they rotate.
I don't see how that would work well if you wanted the laser to actually point the same direction. One of the benefits of flush cups is that they rotate.
Re: anybody make pic rail that can mount in flush cup
Not sure I follow what you want to do but Troy makes a bolt on rail that has a flush cup in it.
Not sure I follow what you want to do but Troy makes a bolt on rail that has a flush cup in it.
Re: anybody make pic rail that can mount in flush cup
there'd be too much slop for any aiming device to be practical.
there'd be too much slop for any aiming device to be practical.
Re: anybody make pic rail that can mount in flush cup
actually i was using an illuminator with it, it would work fine for that.
actually i was using an illuminator with it, it would work fine for that.
Re: anybody make pic rail that can mount in flush cup
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body">want to use a flush cup hole to mount a rail for a laser. anybody make one?
</div></div>
Like ours?
http://shop.victorcompanyusa.com/8-MINI-PICATINNY-RAIL-w-QUICK-DETACH-MOUNT-VC-MINI-QD-PIC-RAIL.htm
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body">want to use a flush cup hole to mount a rail for a laser. anybody make one?
</div></div>
Like ours?
http://shop.victorcompanyusa.com/8-MINI-PICATINNY-RAIL-w-QUICK-DETACH-MOUNT-VC-MINI-QD-PIC-RAIL.htm
Re: anybody make pic rail that can mount in flush cup
btw- our flushcups do not rotate more than 10 degrees. So you never get a twisted sling.
btw- our flushcups do not rotate more than 10 degrees. So you never get a twisted sling.
Re: anybody make pic rail that can mount in flush cup
tryin to mount a rail on the side of the rifle via the flush cup.
OR if somebody makes a rail that i could clamp onto part of the atlas rail in the bottom of the rifle, and wraps around in a 90 degree so i could mount the device to it.
tryin to mount a rail on the side of the rifle via the flush cup.
OR if somebody makes a rail that i could clamp onto part of the atlas rail in the bottom of the rifle, and wraps around in a 90 degree so i could mount the device to it.
Re: anybody make pic rail that can mount in flush cup
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">M.45
That's just what I'm looking for, for my KRG W3 what is the spacing of the mount holes?..you should make one with one hole and one long oval to fit more applications. </div></div>
Ah that is a smart idea. The hole on our mini rail are 1.40" apart.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: finbox</div><div class="ubbcode-body">M.45
That's just what I'm looking for, for my KRG W3 what is the spacing of the mount holes?..you should make one with one hole and one long oval to fit more applications. </div></div>
Ah that is a smart idea. The hole on our mini rail are 1.40" apart.
Re: anybody make pic rail that can mount in flush cup
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body">tryin to mount a rail on the side of the rifle via the flush cup.
OR if somebody makes a rail that i could clamp onto part of the atlas rail in the bottom of the rifle, and wraps around in a 90 degree so i could mount the device to it. </div></div>
If you want a 90 degree picatinny adapter, you could try this:
GG&G Offset Flashlight Mount
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body">tryin to mount a rail on the side of the rifle via the flush cup.
OR if somebody makes a rail that i could clamp onto part of the atlas rail in the bottom of the rifle, and wraps around in a 90 degree so i could mount the device to it. </div></div>
If you want a 90 degree picatinny adapter, you could try this:
GG&G Offset Flashlight Mount
Re: anybody make pic rail that can mount in flush cup
Damn, it's not going to work the magpul L2 fits..but see how the holes are in the depressions with 3 rails in between yours is off by a rail or so. (I don't have mine to measure right now)
http://www.magpul.com/assets/files/Newsfeed/Magpul-Newsfeed-MOERailSections.pdf
Damn, it's not going to work the magpul L2 fits..but see how the holes are in the depressions with 3 rails in between yours is off by a rail or so. (I don't have mine to measure right now)
http://www.magpul.com/assets/files/Newsfeed/Magpul-Newsfeed-MOERailSections.pdf
Re: anybody make pic rail that can mount in flush cup
Kasey has one with the long slotted hole, look up the Accushot webpage.
Kasey has one with the long slotted hole, look up the Accushot webpage.
Re: anybody make pic rail that can mount in flush cup
Oh yea that will work I think!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jfernandez</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body">tryin to mount a rail on the side of the rifle via the flush cup.
OR if somebody makes a rail that i could clamp onto part of the atlas rail in the bottom of the rifle, and wraps around in a 90 degree so i could mount the device to it. </div></div>
If you want a 90 degree picatinny adapter, you could try this:
GG&G Offset Flashlight Mount </div></div>
Oh yea that will work I think!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jfernandez</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body">tryin to mount a rail on the side of the rifle via the flush cup.
OR if somebody makes a rail that i could clamp onto part of the atlas rail in the bottom of the rifle, and wraps around in a 90 degree so i could mount the device to it. </div></div>
If you want a 90 degree picatinny adapter, you could try this:
GG&G Offset Flashlight Mount </div></div>
Re: anybody make pic rail that can mount in flush cup
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hellbender</div><div class="ubbcode-body">Kasey has one with the long slotted hole, look up the Accushot webpage. </div></div>
Bing we have a winner! thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hellbender</div><div class="ubbcode-body">Kasey has one with the long slotted hole, look up the Accushot webpage. </div></div>
Bing we have a winner! thanks
