HS stock & DBM anyone

[holy cow]

I have a PSS stock here at the house and i am thinking i would like to use a Seekins DBM for it. It will be for a short action Remington clone for a 243 build. Has anyone out their done this. Just was not sure with the aluminum bedding block in their that it would be a no go.

Thanks,
Dan

 

[Commander Shepard]

Re: HS stock & DBM anyone

I had a Badger DBM installed in an HS Precision LTR stock. There aren't any issues but I had to send the stock to Badger Ordnance for CNC inletting. Seekins DBM appears to be similarly sized at a glance so I imagine it is workable, the trick will be finding someone who can inlet it for you.

 

[holy cow]

Re: HS stock & DBM anyone

I guess my best bet would be to call Seekins and see if that is something he can or will do if i send him the stock.

 

[RugerSlinger]

Re: HS stock & DBM anyone

It can be done, it will just have to be milled out. If you dont want to have this done I have had good luck with the Wyatts DBM. They drop right in and feed smooth. The only problem is the proprietary mags.

 

[Pat M]

Re: HS stock & DBM anyone

I hogged my PSS stock out for the early single stack Seekins DBM, works and feeds great

 

[cotntop]

Re: HS stock & DBM anyone

Do you have to alter depth or just the perimeter for a DBM on a factory HS Remington stock.

 

[Pat M]

Re: HS stock & DBM anyone

i had to adjust depth - as i didn't use the pillars from the kit (stock has aluminum bedding already)

and i made 1 set of pop can washer so it feeds perfect

 

[cotntop]

Re: HS stock & DBM anyone

If i use Wyatt's DBM are the mags a problem? Rifle will used mostly for bench and hunting. THANKS

 

[pistolpacknpete]

Re: HS stock & DBM anyone

dont mean to hijack your thread but will the PT&G DBM drop right in on a stock inletted for a badger DBM?

 

[cummins cowboy]

Re: HS stock & DBM anyone

why not just wait for the new HS metal to come out

 

[Doctawho]

Re: HS stock & DBM anyone

Wouldn't a CDI just drop right in with no mods?

 

[wade-19]

Re: HS stock & DBM anyone

What new HS metal ?

 

[MPrimo]

Re: HS stock & DBM anyone

... what he said ^^^^^

 

[holy cow]

Re: HS stock & DBM anyone

How much do they charge to do that and do you have any pictures you could post on what it looks like finished? I am thinking of dropping my TAC30 A/W from the group buy into the PSS stock when i get it. What mags can i use in it. the stock is like new and like it also so i am thinking of just using it instead of ordering a stock.<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Commander Shepard</div><div class="ubbcode-body">I had a Badger DBM installed in an HS Precision LTR stock. There aren't any issues but I had to send the stock to Badger Ordnance for CNC inletting. Seekins DBM appears to be similarly sized at a glance so I imagine it is workable, the trick will be finding someone who can inlet it for you. </div></div>

 

[Commander Shepard]

Re: HS stock & DBM anyone

Here you go:

I don't remember how much it was, the cost was part of the full build.