I'm looking at getting an oversized bolt knob on my remington 700 , can anyone tell me where I can send my bolt in to get it done? I would do it at work but all our mills and lathes are computerized and I don't know how to program it to do so. And if so, can I get a rough estimate for a price? Thanks
Gunsmithing Rem 700 Bolt knob
- Thread starter eterp997
- Start date
Re: Rem 700 Bolt knob
Look around here there are tons of smiths that will do it for you.
Look around here there are tons of smiths that will do it for you.
Re: Rem 700 Bolt knob
well i did mine myself to save money and it actually worked really well. ive done about 8 now and have all turned out really well
well i did mine myself to save money and it actually worked really well. ive done about 8 now and have all turned out really well
Re: Rem 700 Bolt knob
Karl Kampfeld did mine and several others here. I had him flute the bolt while as well.
His site - http://www.kampfeldcustom.com/
Karl Kampfeld did mine and several others here. I had him flute the bolt while as well.
His site - http://www.kampfeldcustom.com/
Re: Rem 700 Bolt knob
quality work with great feedback: $75 including shipping
http://www.ebay.com/itm/Badger-Ordance-O...d#ht_503wt_1132
quality work with great feedback: $75 including shipping
http://www.ebay.com/itm/Badger-Ordance-O...d#ht_503wt_1132
Re: Rem 700 Bolt knob
I used phoneix custom rifles for my bolt knob, and I really like the results. I'll happily reccomend them as well. The turnaround time was fast too.
I used phoneix custom rifles for my bolt knob, and I really like the results. I'll happily reccomend them as well. The turnaround time was fast too.
Re: Rem 700 Bolt knob
That's interresting. I've never heard negative feedback on the big knobs. Can you explain why you don't like them? I was just about to do that to mine.
That's interresting. I've never heard negative feedback on the big knobs. Can you explain why you don't like them? I was just about to do that to mine.
Re: Rem 700 Bolt knob
Never considered the interference factor... I will have to go and check on that now. Thanks.
Never considered the interference factor... I will have to go and check on that now. Thanks.
Re: Rem 700 Bolt knob
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jd138</div><div class="ubbcode-body">Karl Kampfeld did mine and several others here. I had him flute the bolt while as well.
His site - http://www.kampfeldcustom.com/</div></div>
+1. I did this too. He offers slightly slimmer "hunter" style knobs if you are worried about interference. I have a R700 5R and the oversize bolt knob works great and has been a nice feature for faster bolt cycling. No interference from the scope on my rifle.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jd138</div><div class="ubbcode-body">Karl Kampfeld did mine and several others here. I had him flute the bolt while as well.
His site - http://www.kampfeldcustom.com/</div></div>
+1. I did this too. He offers slightly slimmer "hunter" style knobs if you are worried about interference. I have a R700 5R and the oversize bolt knob works great and has been a nice feature for faster bolt cycling. No interference from the scope on my rifle.
Re: Rem 700 Bolt knob
Phoenix Custom Rifles did mine. They are here on the Hide. Superb quality and quick turnaround. Much better than the small pimple of a knob from the factory.
Phoenix Custom Rifles did mine. They are here on the Hide. Superb quality and quick turnaround. Much better than the small pimple of a knob from the factory.
Re: Rem 700 Bolt knob
Looks like there are some good choices here...thanks for listing. I've been itching to get this done.
Looks like there are some good choices here...thanks for listing. I've been itching to get this done.
Re: Rem 700 Bolt knob
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: midkansasguy</div><div class="ubbcode-body">well i did mine myself to save money and it actually worked really well. ive done about 8 now and have all turned out really well </div></div>
1+
Did a couple myself as well and they came out great. It was easier then I expected.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: midkansasguy</div><div class="ubbcode-body">well i did mine myself to save money and it actually worked really well. ive done about 8 now and have all turned out really well </div></div>
1+
Did a couple myself as well and they came out great. It was easier then I expected.
Re: Rem 700 Bolt knob
Do it yourself. I did mine. It is easy and should only take you an hour. Plenty of DIY videos on youtube.
Do it yourself. I did mine. It is easy and should only take you an hour. Plenty of DIY videos on youtube.
Re: Rem 700 Bolt knob
Hello
I make oversize bolt handles for install on rifles. CNC machined, Mil spec anodized Hard Type 111 standard screw threads for only $23.00 for guys here plus $3 shipping.
Look at ebay, steveflyer8w45 to see the knobs, got lots in stock and ship in a day or so.
100% satisfied customers.
Thannks
Steve
Hello
I make oversize bolt handles for install on rifles. CNC machined, Mil spec anodized Hard Type 111 standard screw threads for only $23.00 for guys here plus $3 shipping.
Look at ebay, steveflyer8w45 to see the knobs, got lots in stock and ship in a day or so.
100% satisfied customers.
Thannks
Steve
