• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

GA Precision GAP-10

Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: David M</div><div class="ubbcode-body">Question regarding muzzle brake for Gap-10. I placed my order on Dec 23rd for Gap-10, 18" barrel, rifle length hand guard, PRS stock, titan muzzle brake. I am still undecided on the brake I want. This will be my first semi auto rifle. What separates one brake from another? Is it mainly the "look" you are seeking or does one function better than others? Your feedback is appreciated.

Thanks, David M </div></div>



I have the Titan break on mine and there is no recoil to mention. I will say it is loud though (all breaks are). I was using it for deer season and after firing a few times it really hurt my left ear.
I will probably order a thread protector for it and put that on for hunting season next year.
 
Re: GA Precision GAP-10

Is it possible to order just a complete upper receiver? I have a POF lower that has been sitting for a long time. I was planning to just finish it with a POF upper, but I wouldn't mind having a GAP 10 upper.
 
Re: GA Precision GAP-10

Follow up question regarding muzzle brake. I'm assuming they are threaded on. Is there a special tool required to install/remove brake from barrel? How is tightened and removed without scratching the finish. I know it's a gun but still like to take care of my stuff!

Thanks, David M
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: David M</div><div class="ubbcode-body">Follow up question regarding muzzle brake. I'm assuming they are threaded on. Is there a special tool required to install/remove brake from barrel? How is tightened and removed without scratching the finish. I know it's a gun but still like to take care of my stuff!

Thanks, David M </div></div>

Depending on the brake you have (I have a surefire) No special tool required but you'll need something to hold the barrel that wont scratch. I use channel locks with jaw protectors. The brake comes with different sized shims to index it properly and threadlocker. I didn't use the threadlocker because I wanted to be able to remove it easily and it hasn't budged in approx 2k rounds. However I don't advocate deviating from their procedures...if I mount a can I'll use the threadlocker. The brake came with mounting instructions.

If you order it with the brake I believe they deliver them installed. I asked them to ship mine loose with thread protectors installed in case I shoot in a match that doesn't allow brakes.
 
Re: GA Precision GAP-10

photo6.jpg
She has ARRIVED!
smile.gif
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: coryfls3vvt</div><div class="ubbcode-body">
photo6.jpg
She has ARRIVED!
smile.gif
</div></div>

just ordered mine yesterday...
 
Re: GA Precision GAP-10

Mine should be done any day reserving my spot. After seeing yours cory kinda wishing I went FDE instead of black nice stick.
 
Re: GA Precision GAP-10

I got mine back today. Sent it in with an 18.5" upper and got back a 20" upper with a Noveske switch block. Very happy with it so far!
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 6.81star</div><div class="ubbcode-body">Mine should be done any day reserving my spot. After seeing yours cory kinda wishing I went FDE instead of black nice stick.</div></div>

Yea, now i wish i would have went OD green with a black stock, and barrel... OH well the next Gap10 i order will be but shes gonna be 6.5 creedmore.... Shot it today out to 600 Its a HAMMER!!! Especially with 170 lapua FMJ lockbase bullets
 
Re: GA Precision GAP-10

Hows this for torture.... My GAP has finally been delivered to my FFL and I'm stuck on my ship for 5 more week's !!!!
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Glock30</div><div class="ubbcode-body">Hows this for torture.... My GAP has finally been delivered to my FFL and I'm stuck on my ship for 5 more week's !!!!</div></div> I was working offshore when mine was delivered to my ffl, I know the feeling brother.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: coryfls3vvt</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Glock30</div><div class="ubbcode-body">Hows this for torture.... My GAP has finally been delivered to my FFL and I'm stuck on my ship for 5 more week's !!!!</div></div> I was working offshore when mine was delivered to my ffl, I know the feeling brother. </div></div>

Im off the coast of Cameron, LA right now.
Do you still work off shore?
 
Re: GA Precision GAP-10

anybody have any velocity numbers with the factory Hornady 140gr Creedmoor load? Barrel length?
 
Re: GA Precision GAP-10

Im in love with the tan. I was told today 2-3 mos on a standard build and 3-4 on a colored and fluted. Was this wait time in line with what you guys have seen recently?
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Josh Elam</div><div class="ubbcode-body">Im in love with the tan. I was told today 2-3 mos on a standard build and 3-4 on a colored and fluted. Was this wait time in line with what you guys have seen recently?</div></div>

On par with what I was quoted and experienced.

IMG_0703.jpg
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Josh Elam</div><div class="ubbcode-body">Im in love with the tan. I was told today 2-3 mos on a standard build and 3-4 on a colored and fluted. Was this wait time in line with what you guys have seen recently?</div></div> 4 months is what I experienced. Best things come to those who wait.
 
Re: GA Precision GAP-10

I'm fine with 4 mos. I'm in the aftermarket automotive industry and 2 mos often is 8+. I would be good with 8 mos if I was told 7, as long as delivery time is close. Now I jus have to make a final decision on caliber.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike</div><div class="ubbcode-body">Pure bad-assery.

bbcff038.jpg
</div></div>
I think I popped wood! That is badass!
 
Re: GA Precision GAP-10

Anyone know the expected velocity losses on the GAP-10 as you drop from 20" to 18" to 16.5" barrel lengths?
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: truth</div><div class="ubbcode-body">Anyone know the expected velocity losses on the GAP-10 as you drop from 20" to 18" to 16.5" barrel lengths? </div></div>

POF-USA has a pdf file that shows the differences with 168smk...

the gap will be very very close in differences between barrel legnths
 
Re: GA Precision GAP-10

Thanks, but it's an odd test as they have a 14.5 a 16 and a 24" and there's only velocity data for the 14.5 and 16 unless I'm looking at the wrong PDF.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike</div><div class="ubbcode-body">Pure bad-assery.

bbcff038.jpg
</div></div>

ARP-ATAC CAMO?
 
Re: GA Precision GAP-10

Alright guys, time for me to order mine.

I was thinking: 308, 20" barrel with Surefire brake, PRS stock, and a Noveske switch block. Anything else?
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Alright guys, time for me to order mine.

I was thinking: 308, 20" barrel with Surefire brake, PRS stock, and a Noveske switch block. Anything else? </div></div>

Just a note, I have the collapsable UBR on one carbine lower, and the adjusting PRS on a rifle length one, and I never need the cheek riser raised. The 50mm Vortex Razor sits low enough that even the UBR gives a great cheek weld, and it is much lighter.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Alright guys, time for me to order mine.

I was thinking: 308, 20" barrel with Surefire brake, PRS stock, and a Noveske switch block. Anything else? </div></div>

That is my exact setup that I am running now. I am really happy with it.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike</div><div class="ubbcode-body">Pure bad-assery.

bbcff038.jpg
</div></div>

The first thing that came to my mind when I saw your weapon was a bad-ass crocodile that just wanted to kill, kill, kill, you are correct sir, total bad assery!!!!!!!!!!!!!!!!!!!!!!
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike</div><div class="ubbcode-body">Pure bad-assery.

bbcff038.jpg
</div></div>

Indeed. Going to take a guess and i might be wrong but ARP do that?
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Blackops_2</div><div class="ubbcode-body">
Indeed. Going to take a guess and i might be wrong but ARP do that?</div></div>

Nope, that's just me and some Rustoleum.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Blackops_2</div><div class="ubbcode-body">
Indeed. Going to take a guess and i might be wrong but ARP do that?</div></div>

Nope, that's just me and some Rustoleum.</div></div>

Damn Mike, it looks great. Every time i try and convince myself to do a finish on my own i see myself messing up on one part and can't bring myself to do it.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A10XRIFLE</div><div class="ubbcode-body">No there has not been a group buy. Lol they have been working out really well and we are very proud of the way this rifle turned out. </div></div>

"...working out well..." George is an understatement. Mine is awesome! Thanks for the service. Top notch workmanship and accuracy! I am considering another upper set up to run a can. Just need to figure out how to tell the wife I need to spend more money.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike</div><div class="ubbcode-body">Pure bad-assery.

bbcff038.jpg
</div></div>
Way "Pure bad-assery." I don't have the confidence in doing that to mine. I did have it done in FDE to hopefully do something like that. Nice job!
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gmphk</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: A10XRIFLE</div><div class="ubbcode-body">No there has not been a group buy. Lol they have been working out really well and we are very proud of the way this rifle turned out. </div></div>

"...working out well..." George is an understatement. Mine is awesome! Thanks for the service. Top notch workmanship and accuracy! I am considering another upper set up to run a can. Just need to figure out how to tell the wife I need to spend more money. </div></div>
+1...This is my First Ar-10, and well its a whole other ball game getting behind the pedals of one of these... I learned that very quickly. It will expose the fundamentals of marksmanship you are not following true. When i first started shooting my new Gap-10 i could barley manage 1 inch groups.. and i started to think something was wrong... Well something was wrong..it was me.. Since i have discovered my faults and learning more on how to drive this rifle... here is the norm 5 shot groups...I reload my own, and have yet started working up a load specific for this rifle.. these are just some generic recipes that are actually working for me.
photo8.jpg

This is just one of the Awesome groups this gun has shot for me while punching paper today at 100. And no matter what ammo i run in it.. it will produce very similar results.. I don't shoot competitions , just steel and paper at distance but to say I'm happy with this rifle is an understatement... She's a freaking Hammer! Thank you G.A.Precision!
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: coryfls3vvt</div><div class="ubbcode-body">
photo6.jpg
She has ARRIVED!
smile.gif
</div></div>

Damn that looks good! This pic might just cause me to order another one! My poor poor wallet...
 
Re: GA Precision GAP-10

I think I will email them what I'm looking at and get a total price and the wait is not bad at all. Anyone ever have any issues with this company?
 
Re: GA Precision GAP-10

I got a chance to get behind one and it can shoot.
 
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dan11</div><div class="ubbcode-body">I got a chance to get behind one and it can shoot.</div></div> Where did you get that chance?
 
You must log in or register to reply here.

Similar threads

BrianPTR
Firearms GA Precision GAP-10 G2 in 6.5 Creedmoor - Brand New $2950 OBO
Replies
4
Views
1K
Dunny0317
D
R
What is generally considered the most precise semi-auto rifle?
Replies
47
Views
4K
ut755ln
ut755ln
J
SOLD Reduced- GA Precision Crusader 6.5 CM
Replies
2
Views
673
JScot
J
P
Who's your favorite for barrels
Replies
19
Views
596
YotaEer
YotaEer
L
Precision Gas Gun Builders
Replies
12
Views
657
PRSDietitian
P
Top Bottom
Back