While inserting my 5R w/o its' stock, into a "gun-sock" I accidently bent back the bolt stop spring. I tried to bend it back, but it would not hold. The spring is f**ked up. Is it better to have a gunsmith install a new one. Thanks
Gunsmithing Help needed w/ Rem 5R My f'n fault
- Thread starter Phantom F4E
- Start date
Re: Help needed w/ Rem 5R My f'n fault
Get a new sping drive the pin out partially and replace.
No big deal
Get a new sping drive the pin out partially and replace.
No big deal
Re: Help needed w/ Rem 5R My f'n fault
Use actual pin drift punches and pay attention to the pins....when they come out so does the trigger. Have a piece of wire or a drill bit to stick in the hole if you need your drift someplace else. If you remove it, the trigger can start spitting parts. It's an easy fix, just pay attention.
Use actual pin drift punches and pay attention to the pins....when they come out so does the trigger. Have a piece of wire or a drill bit to stick in the hole if you need your drift someplace else. If you remove it, the trigger can start spitting parts. It's an easy fix, just pay attention.
Re: Help needed w/ Rem 5R My f'n fault
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ThudF105d</div><div class="ubbcode-body">While inserting my 5R w/o its' stock, into a "gun-sock" I accidently bent back the bolt stop spring. I tried to bend it back, but it would not hold. The spring is f**ked up. Is it better to have a gunsmith install a new one. Thanks </div></div>
Bolt stop springs, right hand or left hand
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ThudF105d</div><div class="ubbcode-body">While inserting my 5R w/o its' stock, into a "gun-sock" I accidently bent back the bolt stop spring. I tried to bend it back, but it would not hold. The spring is f**ked up. Is it better to have a gunsmith install a new one. Thanks </div></div>
Bolt stop springs, right hand or left hand
