I've got a 20in GAP 1-11.25 twist with a AAC cyclone, and I was wondering if anyone had run some of the Corbon 190 subs through a similar setup? Mainly, I was looking for some assurance that the round will stabilize. Thanks for any help
Suppressors Corbon 190 subs
- Thread starter demo-dick
- Start date
Re: Corbon 190 subs
Won't stabilize....
Won't stabilize....
Re: Corbon 190 subs
Thanks, that just saved me 30 bucks
Thanks, that just saved me 30 bucks
Re: Corbon 190 subs
<span style="text-decoration: line-through">My GAP with the same twist and same suppressor will stabilize the 190's from Southwest ammunition. It would not stabilize the 175's. </span>
Sorry for posting bad info. I got it backward. the 190's were keyholing. So far the 175's are working.
<span style="text-decoration: line-through">My GAP with the same twist and same suppressor will stabilize the 190's from Southwest ammunition. It would not stabilize the 175's. </span>
Sorry for posting bad info. I got it backward. the 190's were keyholing. So far the 175's are working.
Re: Corbon 190 subs
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 317millhand</div><div class="ubbcode-body">My GAP with the same twist and same suppressor will stabilize the 190's from Southwest ammunition. It would not stabilize the 175's. </div></div>
this makes no sense.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 317millhand</div><div class="ubbcode-body">My GAP with the same twist and same suppressor will stabilize the 190's from Southwest ammunition. It would not stabilize the 175's. </div></div>
this makes no sense.
G
Guest
Guest
Re: Corbon 190 subs
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Charger442</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 317millhand</div><div class="ubbcode-body">My GAP with the same twist and same suppressor will stabilize the 190's from Southwest ammunition. It would not stabilize the 175's. </div></div>
this makes no sense. </div></div>
It really doesn't. We recommend nothing heavier (MatchKings that is) than 175s for 1-12, and 190s as the limit for 1-10 twist barrels. 1-11.25 stabilizes 190s here in AZ, but may not in a low density altitude.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Charger442</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 317millhand</div><div class="ubbcode-body">My GAP with the same twist and same suppressor will stabilize the 190's from Southwest ammunition. It would not stabilize the 175's. </div></div>
this makes no sense. </div></div>
It really doesn't. We recommend nothing heavier (MatchKings that is) than 175s for 1-12, and 190s as the limit for 1-10 twist barrels. 1-11.25 stabilizes 190s here in AZ, but may not in a low density altitude.
Re: Corbon 190 subs
My apologies. I got that backward. The 190's were keyholing. The 175's are doing fine so far. Here is a pic when I was trying to get my rifle zeroed with the 190's with no suppressor.
My apologies. I got that backward. The 190's were keyholing. The 175's are doing fine so far. Here is a pic when I was trying to get my rifle zeroed with the 190's with no suppressor.
Re: Corbon 190 subs
The190 I got from South West did same thing. Same twist but in 24".
The190 I got from South West did same thing. Same twist but in 24".
