D
dappmgmt
Guest
Re: 16-18 inch shorty rifles
Sweet rig!
Sweet rig!
- Thread starter DrDeath
- Start date
Re: 16-18 inch shorty rifles
Lots of great ideas here. My short rifles are AR's but I can see one of those 18" 308's happening.
Lots of great ideas here. My short rifles are AR's but I can see one of those 18" 308's happening.
Re: 16-18 inch shorty rifles
My 16.8" Savage 223 with a XLR chassis and Hog Saddle/Atlas extras
My 308 will be back soon with a 18" cut and extras
My 16.8" Savage 223 with a XLR chassis and Hog Saddle/Atlas extras
My 308 will be back soon with a 18" cut and extras
Re: 16-18 inch shorty rifles
Thought I would share.......my Model 7 in 308. Sporting a 700 vls bbl I purchased off of a fellow hide member and had shortened to 16", rethreaded for can, and set back for a tight chamber. B&C ultra light stock and Nikon M-223 glass. She is holding MOA thru 400 so far with loads previously developed for my LTR. Happy to say the least. I really hoped she would weigh in lighter than 10.4 all up, but as usual I was wrong...
Thought I would share.......my Model 7 in 308. Sporting a 700 vls bbl I purchased off of a fellow hide member and had shortened to 16", rethreaded for can, and set back for a tight chamber. B&C ultra light stock and Nikon M-223 glass. She is holding MOA thru 400 so far with loads previously developed for my LTR. Happy to say the least. I really hoped she would weigh in lighter than 10.4 all up, but as usual I was wrong...
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
Love this build. How far have you shot out with it?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
Love this build. How far have you shot out with it?
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JudasMac</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
Love this build. How far have you shot out with it? </div></div>
Actually just picked it up the other day, i have to do some load dev with some 178 bthps first and will probably take it out to 1k
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JudasMac</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
Love this build. How far have you shot out with it? </div></div>
Actually just picked it up the other day, i have to do some load dev with some 178 bthps first and will probably take it out to 1k
Re: 16-18 inch shorty rifles
This has been one of my favorite threads to check out since I joined. I will have one to post in here in the near future. Mine is at Accurate Ordnance getting chopped and threaded now. Will be a 18" Rem700 308 in a Manners T5 with Mini Chassis. Look forward to getting it back, heavy fingering then shooting. Can't wait
This has been one of my favorite threads to check out since I joined. I will have one to post in here in the near future. Mine is at Accurate Ordnance getting chopped and threaded now. Will be a 18" Rem700 308 in a Manners T5 with Mini Chassis. Look forward to getting it back, heavy fingering then shooting. Can't wait
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
i'm in love with this thing
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
i'm in love with this thing
1
1kHIT
Guest
Re: 16-18 inch shorty rifles
It is indeed a GREAT thread! I'm grateful for all those who have contributed. Thanks again.
It is indeed a GREAT thread! I'm grateful for all those who have contributed. Thanks again.
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JudasMac</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
Love this build. How far have you shot out with it? </div></div>
Actually just picked it up the other day, i have to do some load dev with some 178 bthps first and will probably take it out to 1k </div></div>
I am putting together a 16" build and this is pretty much exactly what I'm going for. Is it 16" or 18"? and what are the specs? Either way, it looks great...Well done!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JudasMac</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
Love this build. How far have you shot out with it? </div></div>
Actually just picked it up the other day, i have to do some load dev with some 178 bthps first and will probably take it out to 1k </div></div>
I am putting together a 16" build and this is pretty much exactly what I'm going for. Is it 16" or 18"? and what are the specs? Either way, it looks great...Well done!!!
Re: 16-18 inch shorty rifles
Judas, its an 18.5 krieger, below is the build thread wit specs, thanks!
http://www.snipershide.com/forum/ubbthre...249#Post3366249
Judas, its an 18.5 krieger, below is the build thread wit specs, thanks!
http://www.snipershide.com/forum/ubbthre...249#Post3366249
Re: 16-18 inch shorty rifles
Thanks Mike, That thing is sweet. Hust ordered my stock and hoping it'll end up looking half as good as yours
Thanks Mike, That thing is sweet. Hust ordered my stock and hoping it'll end up looking half as good as yours
Re: 16-18 inch shorty rifles
Savage 12 left handed action in .223 with accutrigger
BFG 16.5 .300blk barrel, 1:8 twist and threaded 5/8th by 24
Sharp shooters precision recoil lug
XLR Chassis system with 12" shroud
Atlas Bipod
AICS 10 rounds mags
EGW 20 MOA base modified by XLR Industries
Seekins High Rings
SWFA SS 3-9 x 42 scope
Will look even better with the thunderbeast hanging off the front. About 3 months still to go...
Thanks again Kyle for all the hard work. I'm sure we'll be doing business again.
Savage 12 left handed action in .223 with accutrigger
BFG 16.5 .300blk barrel, 1:8 twist and threaded 5/8th by 24
Sharp shooters precision recoil lug
XLR Chassis system with 12" shroud
Atlas Bipod
AICS 10 rounds mags
EGW 20 MOA base modified by XLR Industries
Seekins High Rings
SWFA SS 3-9 x 42 scope
Will look even better with the thunderbeast hanging off the front. About 3 months still to go...
Thanks again Kyle for all the hard work. I'm sure we'll be doing business again.
Re: 16-18 inch shorty rifles
tag
tag
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
I know what must be done...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
I know what must be done...
Re: 16-18 inch shorty rifles
My 18"
My 18"
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wes1</div><div class="ubbcode-body">16 inch 223 Rem Tikka T3
</div></div>
Can anybody tell me what kind of Stock is this Tikka T3 In??? Thanks for the help guys!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wes1</div><div class="ubbcode-body">16 inch 223 Rem Tikka T3
Can anybody tell me what kind of Stock is this Tikka T3 In??? Thanks for the help guys!
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HOGTOOTH5R</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wes1</div><div class="ubbcode-body">16 inch 223 Rem Tikka T3
</div></div>
Can anybody tell me what kind of Stock is this Tikka T3 In??? Thanks for the help guys! </div></div>
It looks like an MPI but I'm not sure. I have an MPI custom tactical stock for an R700 long action that looks pretty much Identical but so many stock manufacturers are building forends with that same basic footprint, it's hard to tell
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HOGTOOTH5R</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wes1</div><div class="ubbcode-body">16 inch 223 Rem Tikka T3
Can anybody tell me what kind of Stock is this Tikka T3 In??? Thanks for the help guys! </div></div>
It looks like an MPI but I'm not sure. I have an MPI custom tactical stock for an R700 long action that looks pretty much Identical but so many stock manufacturers are building forends with that same basic footprint, it's hard to tell
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rideHPD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
</div></div>
I know what must be done... </div></div>
What shall be done?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rideHPD</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body">
I know what must be done... </div></div>
What shall be done?
Re: 16-18 inch shorty rifles
JerseyMike,
If your going with the 178 bthp's try McCourt Munitions. He loaded some for my 17.5" Surgeon and they run 2560-2580 out of my gun. They are very accurate and I made a first round hit just the other day at 775 yards on a 11"x12" plate.
I love your build, it's very similar to mine. I went with an M24 profile though but I'm switching to a 6.5 Creedmoor and medium Palma barrel.
Is you stock inletted for an m24/m40 contour. It doesn't look bad at all, Im looking just to see what mine will look like when I go from my m24 contour to the medium palma.
JerseyMike,
If your going with the 178 bthp's try McCourt Munitions. He loaded some for my 17.5" Surgeon and they run 2560-2580 out of my gun. They are very accurate and I made a first round hit just the other day at 775 yards on a 11"x12" plate.
I love your build, it's very similar to mine. I went with an M24 profile though but I'm switching to a 6.5 Creedmoor and medium Palma barrel.
Is you stock inletted for an m24/m40 contour. It doesn't look bad at all, Im looking just to see what mine will look like when I go from my m24 contour to the medium palma.
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rideHPD</div><div class="ubbcode-body">
I know what must be done... </div></div>
What shall be done? </div></div>
I'm thinking him building one like yours is "what must be done"
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jerseymike</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rideHPD</div><div class="ubbcode-body">
I know what must be done... </div></div>
What shall be done? </div></div>
I'm thinking him building one like yours is "what must be done"
Re: 16-18 inch shorty rifles
I must build a 16" 700
I must build a 16" 700
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cigarcop</div><div class="ubbcode-body">My 18"
</div></div>
Very nice rifle. Love that spiral fluting.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cigarcop</div><div class="ubbcode-body">My 18"
Very nice rifle. Love that spiral fluting.
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Pusher591</div><div class="ubbcode-body">JerseyMike,
If your going with the 178 bthp's try McCourt Munitions. He loaded some for my 17.5" Surgeon and they run 2560-2580 out of my gun. They are very accurate and I made a first round hit just the other day at 775 yards on a 11"x12" plate.
I love your build, it's very similar to mine. I went with an M24 profile though but I'm switching to a 6.5 Creedmoor and medium Palma barrel.
Is you stock inletted for an m24/m40 contour. It doesn't look bad at all, Im looking just to see what mine will look like when I go from my m24 contour to the medium palma.
</div></div>
Pusher,
I just loaded up some 178s and 175smks, both shoot equally well with both bullets less than a half min at 100Y. First time i shot it i had flyers in all my groups, a closer inspection revealed the top of the barrel was striking the bottom of the EFR dur to barrel whip. Took a file to it and now it shoots freakin perfect. First round hit on a shoot n see at 300 y, 10 inch plate at 400 and 480. Ive got the 178s going 2560 with 43.5 of varget with no pressure at all. Yup the channel was for an m40 contour
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Pusher591</div><div class="ubbcode-body">JerseyMike,
If your going with the 178 bthp's try McCourt Munitions. He loaded some for my 17.5" Surgeon and they run 2560-2580 out of my gun. They are very accurate and I made a first round hit just the other day at 775 yards on a 11"x12" plate.
I love your build, it's very similar to mine. I went with an M24 profile though but I'm switching to a 6.5 Creedmoor and medium Palma barrel.
Is you stock inletted for an m24/m40 contour. It doesn't look bad at all, Im looking just to see what mine will look like when I go from my m24 contour to the medium palma.
</div></div>
Pusher,
I just loaded up some 178s and 175smks, both shoot equally well with both bullets less than a half min at 100Y. First time i shot it i had flyers in all my groups, a closer inspection revealed the top of the barrel was striking the bottom of the EFR dur to barrel whip. Took a file to it and now it shoots freakin perfect. First round hit on a shoot n see at 300 y, 10 inch plate at 400 and 480. Ive got the 178s going 2560 with 43.5 of varget with no pressure at all. Yup the channel was for an m40 contour
Re: 16-18 inch shorty rifles
finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
Re: 16-18 inch shorty rifles
Just finished this up - still haven't shot it since I cerakoted it a few days ago.
-Rem 700P .308 rebarreled and cut to 18" by Southern Precision Rifles (they were a pleasure to work with).
-McRee chassis (using both AICS and Alpha mags)
-Nightforce 3.5-15x50 mil/mil HS ZS MLR
-Harris 9-13 swivel leg notch
-TIS quick cuff QR
This is the first time I've had a .308 this short. I've got a few brakes to try out to see if the recoil reduction is worth the noise. Hoping to get a suppressor for it if I can swing it (seems to be a big PITA).
Just finished this up - still haven't shot it since I cerakoted it a few days ago.
-Rem 700P .308 rebarreled and cut to 18" by Southern Precision Rifles (they were a pleasure to work with).
-McRee chassis (using both AICS and Alpha mags)
-Nightforce 3.5-15x50 mil/mil HS ZS MLR
-Harris 9-13 swivel leg notch
-TIS quick cuff QR
This is the first time I've had a .308 this short. I've got a few brakes to try out to see if the recoil reduction is worth the noise. Hoping to get a suppressor for it if I can swing it (seems to be a big PITA).
Re: 16-18 inch shorty rifles
Love it. What make of barrel did you go with?
Planning something similar soon.
Creepy similar actually; Scope, barrel length, and chassis all exactly the same. Bipods and supressor are the only real difference. Mind sharing some MVs and load recipes when you can?
Love it. What make of barrel did you go with?
Planning something similar soon.
Creepy similar actually; Scope, barrel length, and chassis all exactly the same. Bipods and supressor are the only real difference. Mind sharing some MVs and load recipes when you can?
Re: 16-18 inch shorty rifles
Obermeyer stainless barrel, Remington varmint profile. My load recipes are simple - Black Hills 168gr AMAX is our duty ammo. Our barrier round is the Federal Tactical Bonded Tip 168 gr. Unless we change duty ammo, it will never shoot anything different.
I'll try to remember to bring the chronograph out the next time I get to the range (Tues). I'm interested in seeing what I'm getting out of this combo too. I'm practicing being patient, since we won't be setting up our "long" range course again until September. All I have at our PD range is 200.
Obermeyer stainless barrel, Remington varmint profile. My load recipes are simple - Black Hills 168gr AMAX is our duty ammo. Our barrier round is the Federal Tactical Bonded Tip 168 gr. Unless we change duty ammo, it will never shoot anything different.
I'll try to remember to bring the chronograph out the next time I get to the range (Tues). I'm interested in seeing what I'm getting out of this combo too. I'm practicing being patient, since we won't be setting up our "long" range course again until September. All I have at our PD range is 200.
1
1kHIT
Guest
Re: 16-18 inch shorty rifles
Love looking at these rifles. Nice!
Love looking at these rifles. Nice!
Re: 16-18 inch shorty rifles
Love it Alan! How are you liking that shorty can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
</div></div>
Love it Alan! How are you liking that shorty can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
</div></div>
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Love it Alan! How are you liking that shorty can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
</div></div> </div></div>
i love it, from the recoil lug to the end of the can is only about 19"
and great sound reduction for how short it is
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Love it Alan! How are you liking that shorty can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
</div></div> </div></div>
i love it, from the recoil lug to the end of the can is only about 19"
and great sound reduction for how short it is
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Love it Alan! How are you liking that shorty can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
</div></div> </div></div>
i love it, from the recoil lug to the end of the can is only about 19"
and great sound reduction for how short it is </div></div>
Alan - 1st off I am very envious and have to admit, hate you a little because you rifle is set up pretty much like I hope mine will be when I get done and wish I would have instead of spending it how I did
On the Brevis - have you compared it much to other cans in .223?
I bought a YHM 7.62 QD can years ago when I didn't know much about cans and wish something like the Brevis was out. I am seriously considering making the Brevis my next can and was curious how much suppression I am going to be giving up. To me if it's not much, the OAL and Weight savings will definitely trump loss in suppression.
Thanks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">Love it Alan! How are you liking that shorty can?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Alan_H</div><div class="ubbcode-body">finally got around to doing one
Rem. SPS tactical .223
cut to 16"
manners T4
seekins bottom metal
</div></div> </div></div>
i love it, from the recoil lug to the end of the can is only about 19"
and great sound reduction for how short it is </div></div>
Alan - 1st off I am very envious and have to admit, hate you a little because you rifle is set up pretty much like I hope mine will be when I get done and wish I would have instead of spending it how I did
On the Brevis - have you compared it much to other cans in .223?
I bought a YHM 7.62 QD can years ago when I didn't know much about cans and wish something like the Brevis was out. I am seriously considering making the Brevis my next can and was curious how much suppression I am going to be giving up. To me if it's not much, the OAL and Weight savings will definitely trump loss in suppression.
Thanks
Re: 16-18 inch shorty rifles
Re: 16-18 inch shorty rifles
Re: 16-18 inch shorty rifles
Ive shot a handfull of .223 cans the only side by side comparison ive done was next to a Gemtech Trek. I dont know all the specs on the trek, i never really researched it, the brevis was equally as quiet with out plugs in.
edit to add
although i have never weighed my brevis compact, its supposed to come in around 16oz
Ive shot a handfull of .223 cans the only side by side comparison ive done was next to a Gemtech Trek. I dont know all the specs on the trek, i never really researched it, the brevis was equally as quiet with out plugs in.
edit to add
although i have never weighed my brevis compact, its supposed to come in around 16oz
Re: 16-18 inch shorty rifles
The beginning
[img:center]
[/img]
Barreled action just got back from the smith, cut from 20" to 17.5" and muzzle brake
[img:center]
[/img]
Painting it tomorrow or Friday then mounting everything back up and off to the range
The beginning
[img:center]
Barreled action just got back from the smith, cut from 20" to 17.5" and muzzle brake
[img:center]
Painting it tomorrow or Friday then mounting everything back up and off to the range
Re: 16-18 inch shorty rifles
i took a remPSS and basically rebuilt it part by part and now all the sudden i have a stock PSS again. Im sending it off to get cut to 16 inches.
i took a remPSS and basically rebuilt it part by part and now all the sudden i have a stock PSS again. Im sending it off to get cut to 16 inches.
Re: 16-18 inch shorty rifles
Re: 16-18 inch shorty rifles
Almost done now [img:center]
[/img]
Remington 700 SPS Tactical .308
17.5 inch barrel with Badger muzzle brake
Viper PST 6-24 FFP mil/mil
B&C light tactical
Almost done now [img:center]
Remington 700 SPS Tactical .308
17.5 inch barrel with Badger muzzle brake
Viper PST 6-24 FFP mil/mil
B&C light tactical
1
1kHIT
Guest
Re: 16-18 inch shorty rifles
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: windermike</div><div class="ubbcode-body"> </div></div>
That is sweet! Thanks for sharing.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: windermike</div><div class="ubbcode-body">
That is sweet! Thanks for sharing.
Re: 16-18 inch shorty rifles
nice setup.
nice setup.
Re: 16-18 inch shorty rifles
Savage 10FP-5R-SR .308 cut back to 18" sitting in a JP Enterprise chassis, Leupold Mk4 rings, Badger 20MOA rail, accu-shot mono-pod, Atlas bipod, YHM QD muzzle brake for the YHM Phantom 762 and Nightforce NXS 12-42x56. It's my do all "gerber tool" rifle. I need some bolt fluting and bolt knob work done and she'll project complete.
Savage 10FP-5R-SR .308 cut back to 18" sitting in a JP Enterprise chassis, Leupold Mk4 rings, Badger 20MOA rail, accu-shot mono-pod, Atlas bipod, YHM QD muzzle brake for the YHM Phantom 762 and Nightforce NXS 12-42x56. It's my do all "gerber tool" rifle. I need some bolt fluting and bolt knob work done and she'll project complete.
Re: 16-18 inch shorty rifles
Lookin into a Gladuis 18.5. Can't wait to see what that little barrel will do at 1k.
Lookin into a Gladuis 18.5. Can't wait to see what that little barrel will do at 1k.
1
1kHIT
Guest
Re: 16-18 inch shorty rifles
BravoSector1,
Nice rig! Love the look of the stock. Pretty cool you have a Savage 10FP in the 5R 308 version. Increasingly, they seem to be pretty scare on sales boards like GB, here, or GA. What is your typical group size at 100 with your loads (factory or handloads)? Taken it out to 1000 yet? Thanks for sharing the pic.
BravoSector1,
Nice rig! Love the look of the stock. Pretty cool you have a Savage 10FP in the 5R 308 version. Increasingly, they seem to be pretty scare on sales boards like GB, here, or GA. What is your typical group size at 100 with your loads (factory or handloads)? Taken it out to 1000 yet? Thanks for sharing the pic.
Re: 16-18 inch shorty rifles
Gap 223,308
Gap 223,308
