Rifle Scopes USO SN-3 T-PAL 5-25x58 Objective Measurment

[Beef Curtain]

I know its a 58mm lens but, I need the outside diameter of the bell housing. Trying to figure what height Spur 34mm 20.6 MOA mount to order.

Going on a GAP .260 with Surgeon action MTU contour.

 

[jbailey]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

2.66"

 

[lazy21]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

I don't thin Spur makes a mount that will work on a tpal body.....I could be wrong

 

[Autark]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

If you want to put scope caps on it, mine measures 2.75 with the USO caps. You might want to look into the USO mounts as well. Their tech told me I need 30 MOA to properly adjust the EREK, at least on my setup.

 

[Beef Curtain]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Autark</div><div class="ubbcode-body">If you want to put scope caps on it, mine measures 2.75 with the USO caps. You might want to look into the USO mounts as well. Their tech told me I need 30 MOA to properly adjust the EREK, at least on my setup. </div></div>

30 MOA total or 30 MOA on top of the Surgeon 20 MOA integrated base?

 

[strike33]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

I spoke with Spuhr about this (great guy) direct from him is that they will not fot the t-pal. The exception to this is the just releases 35mm mount. Best of luck

 

[Fred @ Bison Tactical]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: strike33</div><div class="ubbcode-body">I spoke with Spuhr about this (great guy) direct from him is that they will not fot the t-pal. The exception to this is the just releases 35mm mount. Best of luck </div></div>

I am in the same boat here - would like to know any feedback from folks using the 35mm SPUHR mounts with a TPAL. I have a USO on order and am looking for pros/cons on the SPUHR mount for one. Everything I read seems real good for these, but need to know if there is anything I may be missing like limited adjustment etc...

 

[Autark]

Re: USO SN-3 T-PAL 5-25x58 Objective Measurment

Sorry for the delay. 30 moa total. Mine is on a flat top 6.5 Grendel. Make sure there is space in the mount for the turret base. That thing is big even in the USO mount.