i ran across a load with Hodgdons clays+
has anyone used this data?
168 SIE HPBT
8.0 GRS clays
C.O.L 2.800
FPS 1060
has anyone used this data?
168 SIE HPBT
8.0 GRS clays
C.O.L 2.800
FPS 1060
- Thread starter joemusso
- Start date
Re: .308 subsonic load data
TTT
TTT
Re: .308 subsonic load data
win brass, win primer, 10.1gr trail boss, 150gr prohunter
win brass, win primer, 10.1gr trail boss, 150gr prohunter
Re: .308 subsonic load data
10-11gr trail boss with 180gr round nose bullets works really good for me.
10-11gr trail boss with 180gr round nose bullets works really good for me.
Re: .308 subsonic load data
I always use trailboss like most others. I have found that from 10-11.5 works depending on bullet weight. I beleive i was using 10.5 in a 20" remington aac with 175s and somewhere around 11 for 225 grain hornady hpbt's in my DTA with 1/8 twist. The 175s would always shoot sub moa at 100 and i could hit a 10 inch circle target at 400 every time. Hope that helps. I used lake city lr brass, 210 federal primers, and a coal of 2.815
I always use trailboss like most others. I have found that from 10-11.5 works depending on bullet weight. I beleive i was using 10.5 in a 20" remington aac with 175s and somewhere around 11 for 225 grain hornady hpbt's in my DTA with 1/8 twist. The 175s would always shoot sub moa at 100 and i could hit a 10 inch circle target at 400 every time. Hope that helps. I used lake city lr brass, 210 federal primers, and a coal of 2.815
