Last edited:
- Thread starter patches
- Start date
hot. congrats.
Oh Yeah!! Now you've done it. I gotta get mine soon. Thanks for sharing......
january 14th -ish. arrived july 16th. local SF bay area dealer.
I placed my "official" order on Feb 5th with Metal Gear Sales (cmdecker here on the hide). They had already paid for and ordered the rifle though - I believe pre Shot Show.
Rifle came today (7/18)!!
Rifle came today (7/18)!!
Ordered mine about March 1st from a local dealer, who had 2 others on order prior. No news on any of these yet, but great looking mods with cheek rest and butt spike and cleaner lighter forend. Looks like what I ordered-Tan and black combo with 22 inch 308 barrel. Have the Atlas bipod and scope ready to go. Plan to pre order the 338 conversion from Eurooptic next week. I should then be good to go for the next few years of shooting!!!
We are in a meeting right now. I will address this with Josh. You will be squared away Creature. Yeah, I'm in a company meeting checking the DTA thread.
1/2 moa guarantee btw.
1/2 moa guarantee btw.
Dang it!!! I thought it was 1/4!! 
Oops, I knew that. Don't know what I was thinking. Thanks Russ, you've been a big help through all of this.
On the gen 1 rifles at least, the monopod uses different skins because the buttplate latch is different between them. I'm not sure of Gen2 or A1 stuff. My guess is that you will need to have new skins painted up if you get the monopod setup.
Frank
As far as I know the butt plate mounting is the same on all a1's so the only difference should be the hole for the mono pod and a Dremel might be able to solve that.
And yes I know the smart thing to do would be to wait until I have the mono pod to do the painting....I'm being a little impatient and probably causing myself more trouble
For those of you with 6.5x47L conversions: try CCI 450 primers if you haven't already.
I've been struggling to finesse a load down to a point where I'm happy, knowing what the rifle and cartridge are capable of. A simple switch from GM205M (my go to small rifle primer) to CCI 450 SR Magnum gave me low single digit SD and groups just collapsed into a ragged hole!
136 Scenar L
Lapua Brass
CCI 450
40gr N550
2.740" COAL
2815 fps
38gr also grouped really well @ 2665fps, but I'll take the 40gr as it's faster and there are no pressure signs.
I've been struggling to finesse a load down to a point where I'm happy, knowing what the rifle and cartridge are capable of. A simple switch from GM205M (my go to small rifle primer) to CCI 450 SR Magnum gave me low single digit SD and groups just collapsed into a ragged hole!
136 Scenar L
Lapua Brass
CCI 450
40gr N550
2.740" COAL
2815 fps
38gr also grouped really well @ 2665fps, but I'll take the 40gr as it's faster and there are no pressure signs.
I just bought one of the demo barrels from SAC, a factory DTA 22" .308.
Can anyone give me an idea of elevation adjustment to get my group close to center if my scope is correctly sighted in for .338LM right now?
Can anyone give me an idea of elevation adjustment to get my group close to center if my scope is correctly sighted in for .338LM right now?
http://www.snipershide.com/shooting...e/196794-massive-factory-dta-barrel-sale.html
I picked up a practically brand new 338LM barrel with Gen2 extension, DTA Brake, and cerakoted FDE for just under $900.
I picked up a practically brand new 338LM barrel with Gen2 extension, DTA Brake, and cerakoted FDE for just under $900.
havn't been on the forum in awhile, I want to get a FDE A1 chassis only, and a 300 WM conversion kit from SAC, any idea what the wait times are?
Thanks
Thanks
Realistically you are looking at a year for the chassis the way it's been looking, orders placed at the first of the year are just getting filled. I think it would be well worth the wait if you are patient.
Last edited:
Actually just picked a chassis up right now! Exactly What I was looking for too. Now I just need to find a mag, extension, and bolt for a 300 WM so Mark Gordon can put it all together for me.
Made a call to eurooptics, took the last one.
Quick question for Gen 1 SRS users. I have Gen 1 with a 308, 338 Lapua and 6.5 Creemoor barrel. the 308 and 6.5 shoot within 2 or 3 clicks of each other at 100 yards. I haven't shot the 338 in a while and my early notes had it shooting 9 clicks low. The last time it wasn't even on paper and today it took me 136 clicks of elevation to get near center and 57 clicks right. It shoots a good group but what would make it suddenly shift so far. No, I didn't drop the barrel. I did swap out the stock brake for a TB to go with the suppressor but there is no evidence of a bullet strike on the brake of can.
I use the exact same sequence for changing barrels, no dings, dents or loose parts I can see.
I'm befuddled. Any ideas to try appreciated.
Steve
PS I will shoot it without the brake next time to the range just to see if it has any impact.
I use the exact same sequence for changing barrels, no dings, dents or loose parts I can see.
I'm befuddled. Any ideas to try appreciated.
Steve
PS I will shoot it without the brake next time to the range just to see if it has any impact.
Last edited:
Boy is that going to piss off the people that have one on order for months somewhere else. Good snag...
SAC can probably set you up with the Extension and 300 win mag barrel. Eurooptic sometimes has the mag in stock. You may want to call DTA directly for the bolt and mag.
I know I was on a wait list since January, but than cancelled it to finish another build. Awesome call when they said the my had one more!
Thanks for the info, ill give them a call in the A.M.
Thanks for the info, ill give them a call in the A.M.
The way I look at it is, I'm already spending 4K on the gun so I want the best barrel/maker possible. I don't want the risk that it won't shoot 1/2 MoA
yeah I see what your saying. Also you get more options, so its more of the way you want it
300 win conversion kit - available apparently @ Ryker Arms - Wichita, KS - Pistols Revolvers Rifles Shotguns Guns
The DTA factory barrels are solid and shoot 1/2 MOA guaranteed. Third party barrels is a better option if you want a different profile, cartridge or barrel length that DTA doesn't provide. Going 3rd party because you don't trust DTA factory barrels is short sighted, but going that route because you want something very specific makes much more sense.
Exactly.....you will not get a more accurate barrel than a factory DTA. While they might provide a 1/2 minute guarantee........1/4 MOA with good ammo is more probable.
yeah I just want a heavier barrel without fluting, and maybe longer than 26in
That's why I went with SAC for my .338 LM barrel. I wanted a longer barrel, faster twist, and Fat Bastard with 5/8x24 threading. Otherwise, I'd have been happy to go with a factory barrel...even happier to get one of Mark's demo barrels on the cheap.
But what have they done lately?
Jus' teasin'.
Nick and Russ have really hit their Kahles AMR reticle project out of the ballpark. I think that their AMR fine dots probably strike the right balance between Horus' fine line gradations and 'bare bones' mildot (that the tough guys insist is all they need). Smart that their numbering replaces, rather than accompanies, dots. I suspect I would like the AMR's fine floating illuminated circle even more that Horus H59's floating dots.
How about bringing the Kahles 312 to market with an illuminated AMR reticle?
And didn't the Wall Street Journal leak that DTA's next platform will be a 6-pound (after scope) full-rail SRS-Micro for .223, 6.5 Grendel, 6.8 SPC II, .300 BLK, and 7.62x39?
And then a DTA rimfire trainer à la Sako Quad?
Raise a clamor, Wee Laddies, fer ye favorite next project!
Jus' teasin'.
Nick and Russ have really hit their Kahles AMR reticle project out of the ballpark. I think that their AMR fine dots probably strike the right balance between Horus' fine line gradations and 'bare bones' mildot (that the tough guys insist is all they need). Smart that their numbering replaces, rather than accompanies, dots. I suspect I would like the AMR's fine floating illuminated circle even more that Horus H59's floating dots.
How about bringing the Kahles 312 to market with an illuminated AMR reticle?
And didn't the Wall Street Journal leak that DTA's next platform will be a 6-pound (after scope) full-rail SRS-Micro for .223, 6.5 Grendel, 6.8 SPC II, .300 BLK, and 7.62x39?
And then a DTA rimfire trainer à la Sako Quad?
Raise a clamor, Wee Laddies, fer ye favorite next project!
Last edited:
Anyone have any ideas where I can pick up a mono pod for my new A1?
I just ordered one from DTA, they did not have any in stock but said they should have them ready in two to three weeks....not sure if that's real world two weeks or gun industry two weeks.
I would rather have a .223 conversion in my current DTA, the main reason i purchased my DTA is to replace all my rifles (except for my CZ .22) I know SAC is working on one, and no disrespect to DTA, but another platform, no thanks.
Last edited:
well the dta micro might be good for coyotes, suppressed close range engagements for law enforcement, able to use ammo from your ar/m4 variant ak or even just a big game rifle. (deer, antelope, small big game with the right shot placement) the 22lr might be obsolete, the 22lr seems obsolete since your spending a lot of money on a 22lr for training seems like like your not really saving money, if it came in 22mag, 17hmr, 17mach 2, 17wsm it may seem better but still its like it would have been better to buy a target 22lr rather than this. Basically the micro has some potential, but the rimfire trainer seems like kinda a waste if its like over 2000. P.S the micro would be a cool coyote gun if its compact light, and has great accuracy
Nice try Nukes. LOL. All new projects are kept locked up until their release. Your not going to get a peep out of us as to what new stuff is brewing behind closed doors.
Can you give us ETAs for stuff that isn't brewing, but is already brewed?
A1 Monopods Available for purchase?
A1 Butt Pad Available for purchase?
Can you give us dates and costs?
Anyone in the VA/MD/WVA area have an SRS that they wouldn't mind letting a stranger get behind for a few shots? Want to make sure I'm comfortable shooting one before I start throwing money around
Our Grendel AR is good for hitting IPSC steel at 1,000 meters. I am sure that an SRS-Micro can equal that and have the versatility of .223, 6.8 SPC II, .300 BLK, and 7.62x39. We too are awaiting Mark's SAC conversion kit (He built our Grendel), BUT that will still end up in a 12½ pound rifle (scoped).
Also, I would not propose a $2,000 price for the DTA Rimfire. A factory Sako Quad with with 1 barrel is about $1,100 and with all 4 rimfire barrels is about $1,900.
http://www.eurooptic.com/sako-quad-rifles.aspxThe exuberance of enthusiastic supporters will cheer you on!
Last edited:
The sales staff has an updated schedule so anyone wanting firm dates on delivery call your salesperson.
Take you best guess on the MV and get a "starter"dope chart on GSEVEN.com's web sight ballistic program. Shoot on paper out as far as you can (7-800 yrds) go back to the website and enter your true point of impact data and the computer algorithm will compute your true muzzle velocity and generate a complete printable dope chart. I have used it on several weapons out to 1300 yards and found it to be remarkably accurate once trued. Other programs work the same. This one is free and will keep your data for different loads, guns and altitude densities.
you got a point about the sako quad
oh and I've never really looked at the sako quad I've heard of the name but nothing about it, looked it up and now I just need one god dang man, on eurooptic they have them In mcmillan stocks!
