First post here hope these work
http://s1263.photobucket.com/user/hatexoc/media/Mobile Uploads/IMG_6899_zps6ebb39d1.jpg.html
http://s1263.photobucket.com/user/hatexoc/media/Mobile Uploads/IMG_6899_zps6ebb39d1.jpg.html
Last edited:
- Thread starter GUNNER75
- Start date
Do you work, for the FBI?Not that I'm "opposed" to that, but Just sayin.Suckers. I don't own any.{SMILEY FACE}
Last edited:
[Very nice Hair!!!!!!!!!!!! Mine won't let it go below her shoulders.PS What gun? Where's the gun? Dang, man! You need to put that "picture", under a stickey. It should read: Open at your own risk! I "barely made it to my heart medicine", after I saw that!QUOTE=BgBmBoo;583353]Top to bottom:
My beautiful wife showing off the 16" JP-15 upper C3 billet lower
20" JP CTR-02 w/C3 lower
same 16" JP
JP Vtac 16" w/S&W lower
POF 16" gas piston upper on S&W lower under DTA SRS
Hottie wife again w/Volquartsen Evolution .223
And last better shot of 20" JP CTR-02
Take care,Stan
[/QUOTE]
My beautiful wife showing off the 16" JP-15 upper C3 billet lower
20" JP CTR-02 w/C3 lower
same 16" JP
JP Vtac 16" w/S&W lower
POF 16" gas piston upper on S&W lower under DTA SRS
Hottie wife again w/Volquartsen Evolution .223
And last better shot of 20" JP CTR-02
Take care,Stan
[/QUOTE] Last edited:
My newest rifle, she has been great fun to shoot. Below the pictures is from the first / last time I took her out. The heat mirage was pretty horrible from my .556 can and could hardly see the target. I guess I need to group it with out the can until I can figure out a solution
Next is a family photo of my new rifle and my .22 AR w/ Hunter Town Arms Guardian suppressor
Now my main rifle, I've since taken the AFG II off the front of it and in the process of trying to figure out which 1-4 or 1-6 I want to upgrade it too. That rifle is kinda a mutt full off different parts and it preforms greats.
This one just sits in the safe mostly. Built it because I had a little extra time and money on my hands. I'll probably top it with an Eotech and side folding magnifier
My wife's gun. I love having a wife that supports my shooting addiction and even partakes in it when she has time.
Beater woods rifle for deer camp and 4 wheeler riding. I scored an AR15 rack out of a patrol car that I mounted on the front of my wheeler
And a rifle I did for my cousin. Not had a chance to shoot it really. But his 15" Geissele MK2 rail just came in so I've gotta change a few things up.
Next is a family photo of my new rifle and my .22 AR w/ Hunter Town Arms Guardian suppressor
Now my main rifle, I've since taken the AFG II off the front of it and in the process of trying to figure out which 1-4 or 1-6 I want to upgrade it too. That rifle is kinda a mutt full off different parts and it preforms greats.
This one just sits in the safe mostly. Built it because I had a little extra time and money on my hands. I'll probably top it with an Eotech and side folding magnifier
My wife's gun. I love having a wife that supports my shooting addiction and even partakes in it when she has time.
Beater woods rifle for deer camp and 4 wheeler riding. I scored an AR15 rack out of a patrol car that I mounted on the front of my wheeler
And a rifle I did for my cousin. Not had a chance to shoot it really. But his 15" Geissele MK2 rail just came in so I've gotta change a few things up.
Last edited:
ChevyTXhunter said:JL said:
What kinda mag is that?
Looks at first glance to be a windowed 308 PMAG. I must be wrong though, I didn't think they make one of those.
Oberland .308 mag. (Germany)
OA MAG 10 20 Schuss 308 Win Magazine Mags - Oberland Arms
Last edited:
You lucky bastard
[/QUOTE][Very nice Hair!!!!!!!!!!!! Mine won't let it go below her shoulders.PS What gun? Where's the gun? Dang, man! You need to put that "picture", under a stickey. It should read: Open at your own risk! I "barely made it to my heart medicine", after I saw that!QUOTE=BgBmBoo;583353]Top to bottom:
My beautiful wife showing off the 16" JP-15 upper C3 billet lower
20" JP CTR-02 w/C3 lower
same 16" JP
JP Vtac 16" w/S&W lower
POF 16" gas piston upper on S&W lower under DTA SRS
Hottie wife again w/Volquartsen Evolution .223
And last better shot of 20" JP CTR-02
Take care,Stan
After some night work.
Out and about.
After she got home and put on the lower she was missing while gone.
Working:
Noveske 18"
Geissele
CQBSS
Gemtec
Colt lower
Home:
Noveske lower
Different Geissele
Templar can when my stamp comes back.
Last edited:
First post. I've been lurking awhile amd really learned a lot from you guys. A great Forum.
JP CTR-02....It's a total JP build but John Paul agreed to use Mega Arms matching billet receivers. 20" barrel,JP compensator,and Burris MTAC 1.5-6x40 scope in a JP one-piece mount.
JP CTR-02....It's a total JP build but John Paul agreed to use Mega Arms matching billet receivers. 20" barrel,JP compensator,and Burris MTAC 1.5-6x40 scope in a JP one-piece mount.
Last edited:
Pretty! Why did you go with the megas? The JP receivers are gorgeous.
JP receivers are very nice.Always had great experiences w/ Megas and like the set screw for tightening the upper and lower. Just a personal thing.
Understood! Pretty gun"
Last edited:
Thank you....and like all JP's I've known,it is extremely accurate. Only had it out to 545yds. so far,but it is an awesome rifle.
New here and want to play.. I hope I can figure out how to post a pic. LOL nope I'm a loser!
Last edited:
MA Ten should have never got rid of it :-(
I did the krylon job
I did the krylon job
Damn aln krylon skillz.....you has them!!!!
Last edited:
^^^that BFPU is Awesome
Last edited:
I like your style George...
My 18" 6x45
Last edited:
A Few Of My Favorites
BCM M4
HK MR 762
Some Oldies That Are Very Rare
Mint Vickers Pedersen
Mint G41M
All Matching Including Mount Minty AC K43 45 Sniper
BCM M4
HK MR 762
Some Oldies That Are Very Rare
Mint Vickers Pedersen
Mint G41M
All Matching Including Mount Minty AC K43 45 Sniper
Last edited:
My first SBR
Just needs trigger work- my new favorite rifle/optic combo:
.308 and 6.8
Similarly, I talk a lot, but I'm just blowing smoke, I don't own any firearms. I did at one time have a couple standard cap 30 rd magazines, never got around to getting any 90 or 100 rd high caps.
Last edited:
I'll play....
Might have posted some of these before.
KAC4 by wormydog1724, on Flickr
MK18-BlockII2 by wormydog1724, on Flickr
3 by wormydog1724, on Flickr
and the 6.8
KAC4 by wormydog1724, on Flickr
MK18-BlockII2 by wormydog1724, on Flickr
3 by wormydog1724, on Flickr
and the 6.8
2 uppers in various configurations.
Slight update to the Block II
blockii-4 by wormydog1724, on Flickr
blockii-3 by wormydog1724, on Flickr
blockii-4 by wormydog1724, on Flickr
blockii-3 by wormydog1724, on Flickr
Waiting on the stamp for this one...
And you can laugh here... I don't normally run the PST on it, but it works surprisingly well. An 11.5" barreled Communist rifle that shoots ragged one-hole groups at 50 yards is ok by me.
And you can laugh here... I don't normally run the PST on it, but it works surprisingly well. An 11.5" barreled Communist rifle that shoots ragged one-hole groups at 50 yards is ok by me.
Still working on it but really liking the 18" FN barrel.
I'm in between the YHM TJ 15" or the Troy Alpha 15" handguard. I just want to know how heavy the YHM is and what kind of gas block you are running underneath. I'd really like to fit an SLR DA7 if possible. Oh, and are the rails removable?
My newest and probably a tie for my favorite with my MK12. This one has a happy switch though. VLTOR upper, Daniel Defense 14.5" BBL, Noveske 13.5 NSR, Surefire SOCOM 556RC can, Aimpoint T1, Surefire M720V Laser Devices DBAL I2(not shown), and Geissele Super Select Fire. I need to paint the light & laser
Here's the MK12 mod0 its gonna get a similar paint job when I get caught up. I need to also get a Ops-inc can for it, I have a Thunder Beast on it now.
Here's the MK12 mod0 its gonna get a similar paint job when I get caught up. I need to also get a Ops-inc can for it, I have a Thunder Beast on it now.
Do you have another lower that's painted to go with that? I've painted my bolt rifle and keep going back and forth if I should krylon my black rifle. Not going to lie, I'm really digging the upper painted on the black lower. Nicely done
