, but its the new trend putting atm pin code on your rifle so whenever you're at the atm just bring your rifle and you'll never forget it.
Dammit, that's mine too. Now I have to change that shit.
Don't ask cause I won't say. 
Bravo 6 Delta
Bartlein
6mm Creedmoor
Deviant or Defiance
I couldn't figure out how to make Manners flow with that... I wanted to go with the Code Name for the rifle but George it might not be a good idea.
Frank, I was thinking about this recently, and I am hoping Oct, after this run of travels ends. I was trying to think about the drive cause flying with everything might be a pain
That is the mcs-t6a, in a new layup that we are going to call the Elite Tactical Shell. I will get a thread going next week with all the details and some better pictures. This layup will be offered in two different camo patterns for now, GAP and Midnight. The shells are a 100% carbon fiber with almost the same specs that we use on the super light Elite hunters, but theses will be done in a clear gel coat, combined with two other colors. They are coming out very light and stiff, the stock in the picture below is a mcs-T6A that is only 2.79lbs. That includes the .38 lb KMW rock solid hardware and the 1" large decel pad. That is almost a lb lighter than our standard shell. The stock below actually is going on the gun that we are giving away at the GAP Grind next weekend, all you need to do is win the Manner's Rock Stage. It has not been armored gripped yet so it is still a little shiny. Thank you
That is the mcs-t6a, in a new layup that we are going to call the Elite Tactical Shell. I will get a thread going next week with all the details and some better pictures. This layup will be offered in two different camo patterns for now, GAP and Midnight. The shells are a 100% carbon fiber with almost the same specs that we use on the super light Elite hunters, but theses will be done in a clear gel coat, combined with two other colors. They are coming out very light and stiff, the stock in the picture below is a mcs-T6A that is only 2.79lbs. That includes the .38 lb KMW rock solid hardware and the 1" large decel pad. That is almost a lb lighter than our standard shell. The stock below actually is going on the gun that we are giving away at the GAP Grind next weekend, all you need to do is win the Manner's Rock Stage. It has not been armored gripped yet so it is still a little shiny. Thank you
That is the mcs-t6a, in a new layup that we are going to call the Elite Tactical Shell. I will get a thread going next week with all the details and some better pictures. This layup will be offered in two different camo patterns for now, GAP and Midnight. The shells are a 100% carbon fiber with almost the same specs that we use on the super light Elite hunters, but theses will be done in a clear gel coat, combined with two other colors. They are coming out very light and stiff, the stock in the picture below is a mcs-T6A that is only 2.79lbs. That includes the .38 lb KMW rock solid hardware and the 1" large decel pad. That is almost a lb lighter than our standard shell. The stock below actually is going on the gun that we are giving away at the GAP Grind next weekend, all you need to do is win the Manner's Rock Stage. It has not been armored gripped yet so it is still a little shiny. Thank you
We could do a elite tactical shell in a folder, but you are not going to see as big a difference in weight like you will in the standard non folders. The main reason for this is that the hinges are actually molded/cast into the shells, I would not want to change the material layup or special fill around the hinge areas. It was designed to lock the hinges in rock solid. Thank you
