Gunsmithing Suppressor mount remover?...

[PlinkIt]

Has anyone out there made / sold anything to this effect?

Like a 4-6 inch piece of hex stock with 5/8 threads down half of it, and a jamb nut?

TOMB mount screwed off with my can, and there is nothing to grab ahold of, thanks for any insight

 

[GH41]

Has anyone out there made / sold anything to this effect?

Like a 4-6 inch piece of hex stock with 5/8 threads down half of it, and a jamb nut?

TOMB mount screwed off with my can, and there is nothing to grab ahold of, thanks for any insight

Use the tool you have... The barrel. Put a few drops of Loctite on the threads and screw it back on. When it cures unscrew the can. Try blue first but you may have to use red. You will need heat to remove the red.

 

[combat45acp]

Use the tool you have... The barrel. Put a few drops of Loctite on the threads and screw it back on. When it cures unscrew the can. Try blue first but you may have to use red. You will need heat to remove the red.

Or if you want to mount it permanently, and not come off under heat stress...use rockset which is heat resistant. If you ever need to remove the rockset soak in water. Good luck.

 

[PlinkIt]

Use the tool you have... The barrel. Put a few drops of Loctite on the threads and screw it back on. When it cures unscrew the can. Try blue first but you may have to use red. You will need heat to remove the red.

Was trying to do this off of the barrel, as the mount was timed to a rifle I no longer have. So wanted to get it out of the can and time it to a new rifle. Didn't want to glue it to the new barrel before timing, and can't really see very well to time it on new barrel while it's in the can...

 

[PlinkIt]

Or if you want to mount it permanently, and not come off under heat stress...use rockset which is heat resistant. If you ever need to remove the rockset soak in water. Good luck.

Think I'm going to try the rock set on this next barrel once I can get timing close. Thanks

 

[BurnOut]

https://www.snipershide.com/shootin...rs/204531-30ba-brake-stuck-in-can-make-a-tool

 

[PlinkIt]

https://www.snipershide.com/shootin...rs/204531-30ba-brake-stuck-in-can-make-a-tool

Everytime I click on the link it says invalid?.....

 

[supercorndogs]

Have you run to the hardware store or parts store maybe, like napa. To see if they have a 5/8x24 bolt and nut?

 

[PlinkIt]

Have you run to the hardware store or parts store maybe, like napa. To see if they have a 5/8x24 bolt and nut?

5/8 - 11 & 5/8 - 18 was the only thing I saw right off

i think those are the standard coarse and fine threads

 

[BurnOut]

Everytime I click on the link it says invalid?.....

Grrrr... I obviously messed up the pasting of that link. Let's try again:

https://www.snipershide.com/shootin...rs/204531-30ba-brake-stuck-in-can-make-a-tool

 

[PlinkIt]

Grrrr... I obviously messed up the pasting of that link. Let's try again:

https://www.snipershide.com/shootin...rs/204531-30ba-brake-stuck-in-can-make-a-tool

Worked that time, thanks

thats about the idea I was having... he just made it a little more involved for that exact model

i was thinking just hex stock turned down & a jamb nut...

guess ill I’ll just have to go to the machine shop

 

[supercorndogs]

http://alliedboltinc.com/Poleline-H...4-inch-SQUARE-HEAD-MACHINE-BOLT-WITH-NUT~8236

You wont find it in the standard bolt bin.

 

[PlinkIt]

http://alliedboltinc.com/Poleline-H...4-inch-SQUARE-HEAD-MACHINE-BOLT-WITH-NUT~8236

You wont find it in the standard bolt bin.

Thanks... But
That's a 5/8-11 bolt that's 24" long
not a 5/8-24 thread....

 

[supercorndogs]

Thanks... But
That's a 5/8-11 bolt that's 24" long
not a 5/8-24 thread....

LOL. I found another 5/8 24 inch long anchor bolt too.