Where can I get 10-rd mags in 300 WM for the AX 2.0 chassis?

[11Bravo18Alpha]

As it turns out, the AX chassis for the 300 WM has a very narrow mag well, and the mag that came with it is a five-rounder. I was caught off guard by the narrow mag well, because I have an AX first model in 308 which has a very wide mag well, and I can get 5 and 10-round mags easily.

I can't seem to find any 10-rd mags for this chassis in 300 WM.

Help.

 

[PBWalsh]

AI does not make 10 round .300WM magazines. Closest to that would be a 5 rounder with an MPA (I think) +4 mag extension.

 

[redneckbmxer24]

Here you go OP

Those mags are made for the original AICS, AT AICS, and AWM so they don't have the little lip for the AX chassis but mags without lips work just fine in AX chassis. I've used standard AICS mags and AT mags in them before.

 

[redneckbmxer24]

AI does not make 10 round .300WM magazines. Closest to that would be a 5 rounder with an MPA (I think) +4 mag extension.

This entire post is misinformation. AI makes two different 10 round 300WM mags, one for the chassis which is the one I posted above and also another proprietary one for their AXMC rifle.

Those MPA mag extenders are for AICS 308 and AT/AW 308 mags and would never work on the longer 300WM mags.

 

[PBWalsh]

You’re right, I read the MPA description wrong.

 

[RyanScott]

https://www.eurooptic.com/accuracy-international-magazine-10-round-300-win-mag.aspx

 

[11Bravo18Alpha]

https://www.eurooptic.com/accuracy-international-magazine-10-round-300-win-mag.aspx

This description says this mag is "For Legacy AICS / AW". Those are old chassis systems. They don't make one for the AX?

 

[b6graham]

This description says this mag is "For Legacy AICS / AW". Those are old chassis systems. They don't make one for the AX?

the AX is an AICS. Accuracy International Chassis System

 

[11Bravo18Alpha]

the AX is an AICS. Accuracy International Chassis System

Yes, I know that. But I am aware that the various chassis systems by AICS have changed over the years, and it seems that the magazines are changing with them. Some are staggered-stack, some single. Some have the lip on the front, older ones don't.
What I was hoping to get was a 10-rd one for the new AX 2.0 300 WM chassis that is specifically made for that chassis. It just seems that I can't find one anywhere.

Thanks.

 

[b6graham]

Yes, I know that. But I am aware that the various chassis systems by AICS have changed over the years, and it seems that the magazines are changing with them. Some are staggered-stack, some single. Some have the lip on the front, older ones don't.
What I was hoping to get was a 10-rd one for the new AX 2.0 300 WM chassis that is specifically made for that chassis. It just seems that I can't find one anywhere.

Thanks.

call Mile High. i'm sure someone will get you squared away

 

[redneckbmxer24]

Yes, I know that. But I am aware that the various chassis systems by AICS have changed over the years, and it seems that the magazines are changing with them. Some are staggered-stack, some single. Some have the lip on the front, older ones don't.
What I was hoping to get was a 10-rd one for the new AX 2.0 300 WM chassis that is specifically made for that chassis. It just seems that I can't find one anywhere.

Thanks.

For the most part they've stayed the same. True AX chassis mags have the lip, but you can use the standard lipless mags without issue.

AICS 308 (short action) mags have always been staggered single feed, and still are. Those have not changed except for the AX lipped mags also being added.

AICS long action (300/338) mags have always been single stack and still are. They also haven't changed except for the lipped AX mags available now.

You can get the 10 round AICS 300 magazine and use in your chassis without issue. I guess you didn't read my post about that though.