Ruger precession

[Long range big ben]

Hello I am thinking about rebareling my ruger 338 Lapua to a 300 Norma mag with a 28 inch match grade with a break I have found a couple barel manufactures that will make me one will it work

 

[hlee]

.,?! Try them...

 

[Bender]

LRI. One of the first out with RPR barrels.

It will work

 

[SIDS01]

Hello I am thinking about rebareling my ruger 338 Lapua to a 300 Norma mag with a 28 inch match grade with a break I have found a couple barel manufactures that will make me one will it work

I added a 32" 300 Norma barrel to my 338 Lapua RPR. There is a picture in the 338 RPR thread in the ELR section.

https://www.snipershide.com/shooting/threads/ruger-rpr-338lm.6906310/

Post #42

The standard RPR barrel nut wrenches won't work because the threaded portion of the nut ahead of the AR15 splines is larger. I bored a Brownell's AR15 wrench to clear and it worked slick.

The Ruger barrel tenon is 1.2", so you'll need a barrel vise that works with that size. I used a standard 1.25" barrel blank, so the inside of the Ruger hand guard nut needed to be bored larger. There was lots of material left when I was done and it'd still work with the Ruger barrel.

I'm pretty sure the usual players will be making barrels and tools available for the big RPR shortly.