Good morning gentlemen , Thought we might could get a new thread dedicated to proof carbon fiber barrel builds going . I am currently planning a new build that will be a mid weight do it all rifle with a proof barrel & probably a manners T3 . So send the pics and maby a small description. Thanks
-
Having trouble using the site?
Contact support
Proof carbon fiber barrel builds
- Thread starter Snowflake38
- Start date
I’m sitting on a manners MCS-T waiting to get my hands on a Bighorn tl3 and proof/savage profit 20”
Cool setup , I’ve got its right handed brother in the safe ,only difference is bartlein barrel
Bighorn TL3
Proof 6.5 PRC Savage pre fit
KRG Bravo
Vortex Razor AMG
TBAC 6.5mm Ultra 7
about 11.5lbs as pictured w/ mag
Proof 6.5 PRC Savage pre fit
KRG Bravo
Vortex Razor AMG
TBAC 6.5mm Ultra 7
about 11.5lbs as pictured w/ mag
I would really, I mean REALLY like to try the 6.5 PRC. Still debating it or a 260 ai for the cheapskate in me at some point in the near future.
I'll try to find time to weigh it when I get in. It's light enough though without the weights in the hybrid chassis to take coyote hunting with ease.
I have a build due back to me in the next few weeks. Proof carbon barrelled version of my current 7mmSAW on a tempest action in a PRS2 stock etc. Ran with an 8.4 twist over an 8 for the carbon proof barrel on this build though.
The current build weighs just over 12lb so I’m interested to see what this one comes back at with the carbon barrel, 3-20x PM2 over the 5-25x and a DBM instead of the current mini chassis.
The current build weighs just over 12lb so I’m interested to see what this one comes back at with the carbon barrel, 3-20x PM2 over the 5-25x and a DBM instead of the current mini chassis.
Mine is basically the same. 6.5 PRC, Sendero Proof, and mpa hybrid. It’s right at 13.8#
6.5 prc proof sendero built on a Curtis vector. In a manners MCS-TA. 10lbs 6 oz with the brake.
Remington 700 BDL 28nosler
26in sendero light
McMillan Game Hunter
Bix Andy
Heathen brake
Athlon Ares ETR
All up with three round 10.6lbs
I believe it's 22". I'll have to check weight as well. It has the manners chassis, so it's not lightweight but definitely good enough for hunting.
Bighorn TL3 20" creed sendero light in a EH6A
Bighorn SR3 22" PRC sendero light in a EH6A
Top to bottom:
338lm Stiller tac338 full bull profile
22cm Nucleus full bull
7mm rem 700 sendero
6.5cm rem 700 hardy engineering sendero
338lm Stiller tac338 full bull profile
22cm Nucleus full bull
7mm rem 700 sendero
6.5cm rem 700 hardy engineering sendero
What kind of speed and bullet... that’s almost exactly what I’m putting togetherBighorn TL3 20" creed sendero light in a EH6A
Not a Proof but a Hardy Carbon finished at 24.5"
Surgeon 591 in 6.5 Creed
Manners T5A Elite Carbon
Vortex Razor AMG
Total weight with bipod attached is about 13 pounds
Loved the look of Proof but couldn't get my hands on one when I built the rifle
Really need to get some better pics of my rifle one of these days.
Surgeon 591 in 6.5 Creed
Manners T5A Elite Carbon
Vortex Razor AMG
Total weight with bipod attached is about 13 pounds
Loved the look of Proof but couldn't get my hands on one when I built the rifle
Really need to get some better pics of my rifle one of these days.
Last edited:
Defiance, Manners EH1, Proof 23.5" 7mm RM . Its 11.5 lbs as pictured with a full mag .
Mausingfield
Bravo
Triggertech diamond
Insite Arms brake
Atacr F1.
Can't say for sure , I took in on a trade last summer. It measure 23.5" from the lug face to the muzzle. No big deal , it sends 180 Hybrids at 2925 and the accuracy is ridiculous.
Well as fas as i know proof only makes their carbon into even numbers length..but measuring from lug isnt really the true length
Thread that goes inside the action still part of the barrel..make sense that probably 24"
Well as fas as i know proof only makes their carbon into even numbers length..but measuring from lug isnt really the true length
Thread that goes inside the action still part of the barrel..make sense that probably 24"
You're most likely correct, it's my only Proof and I didn't spec the build . Either way I'm not disappointed with any aspect of the rifle .
TL3
Manners EH1 CIP mini chassis
26" Sendaro 28 Nosler
TT Special
AMG in ARC Rings
Manners EH1 CIP mini chassis
26" Sendaro 28 Nosler
TT Special
AMG in ARC Rings
Got it all together the other night.
20” Proof .308
Bighorn Origin
TriggerTech Primary
KRG Whiskey3
3-15 SWFA
20” Proof .308
Bighorn Origin
TriggerTech Primary
KRG Whiskey3
3-15 SWFA
Proof 22” 6.5cm 1:8 Insite Arms Brake. Marc @ Spartan Rifles Trued and spun up. T4A elite with Huber 2 stage trigger, Badger bottom metal, Henderson Precision Full length 1.5” Dive tail, carbon barrel channel.
Shot DRT approx 450y full run off RRS Tripod - not a shot I was comfortable taking my son wax’d it I think he said he lead 10 mills (but I don’t exactly remember).
Gun is fun to shoot and about 11-1/2 with a carbon Spartan Tripod
Shot DRT approx 450y full run off RRS Tripod - not a shot I was comfortable taking my son wax’d it I think he said he lead 10 mills (but I don’t exactly remember).
Gun is fun to shoot and about 11-1/2 with a carbon Spartan Tripod
Finally got some better lighting to do this beauty some justice. Spartan Precision builds hammers!!
Similar threads
