Just wondering if anybody else on the forum has had problems with Hornady 300 Norma brass? I've tried resizing the brass the first time and the shoulders are denting with hardly any case lube, then you try the next piece with no lube and you have a stuck case! I'm definitely not over lubing the cases and I've tried 2 different types of wax lube and hornady and RCBS spray lube with the same result. I also ran several pieces of Lapua brass with the same amount or more of lube with NO problem. What is it with the Horanady Brass that is making the shoulder dent? Or is it just terrible brass?
Hornady 300 Norma Brass Shoulder dents with FL Resizing??
- Thread starter kgoltz
- Start date
Are both the hornady and Lapua once fired? Is this the first time using the die? Post a pic of the dent.
Clean the die good, make sure the vent hole is not clogged, make sure the die is dry, make sure there is ZERO lube on or near the shoulder and try again.
Hmmm??? Well, it still looks like either too much lube or somehow the lube is working it's way onto the shoulder; some kind of soft material that can't be compressed is getting onto the shoulder causing that kind of dent, so . . . ???
