• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Sources for nylon webbing

Anybody know where to get 4" wide 0.07" thick nylon webbing? I only need 2 yards or so.
-
( i trying to remember ? ) my past learning stored behind cobwebs in my brain . you sure it not ( 0.7 " ) webbing ? .. 0.07 wold be thin as paper.
You must be asking about ( type 4 ) W-4088 Nylon Webbing ? . as it thin as I know and about that thick of webbing . Type 4 is used for chafing strips, confluence wrap, sheaths ...etc .
Now there are some 'pretty thin' nylon ( Tapes ) but nylon tape is not webbing and not the tensile strength as webbing .
.
edit add: ( nylon Tapes )
T-5038 nylon type 4 ( Tape ) is pretty thin and is used a lot for support in sewing ( support tape ) . it is a pretty thin bias-weave/haringbone .
Type lll nylon tapes, is pretty thin, and what you see a lot on seam-binding on gear . it a square weave nylon weave .
.
 
Last edited:
-
( i trying to remember ? ) my past learning stored behind cobwebs in my brain . you sure it not ( 0.7 " ) webbing ? .. 0.07 wold be thin as paper.
You must be asking about ( type 4 ) W-4088 Nylon Webbing ? . as it thin as I know and about that thick of webbing . Type 4 is used for chafing strips, confluence wrap, sheaths ...etc .
Now there are some 'pretty thin' nylon ( Tapes ) but nylon tape is not webbing and not the tensile strength as webbing .
.
edit add: ( nylon Tapes )
T-5038 nylon type 4 ( Tape ) is pretty thin and is used a lot for support in sewing ( support tape ) . it is a pretty thin bias-weave/haringbone .
Type lll nylon tapes, is pretty thin, and what you see a lot on seam-binding on gear . it a square weave nylon weave .
.
I think you forgot your inch measurements. To be clear I'm looking for the first pic.
20200501_155357.jpg

20200501_155439.jpg


Your brain is thinking 0.007". That's ~2 pieces of paper thick or maybe 4 hairs.

At least you're not thinking 0.0007". That is a little under half a thinning hair. At work right now I'm holding +/- 0.0002".
 
Fucking mm/inch Decimal point bullshit /..sorry can't run a Caliper ... LOL .

So what is that in 1st pic. ? .
it is some thin square weave webbing ? . looks pretty soft-supple weave or pretty worn ?

( 4" wide the killer, or i would just send you some ) . I got shitloads of different type webbing's stocked here in sew room, but nothing ( 4' wide ) .
Webbing sold all over the internet .. BUT .. ( 4" wide ) 'good' webbing is going to be a little hard to find just browsing on internet retail sales even if, full Roll, let alone just a small amount of couple yards .
if you just Google up ( 4" webbing for sale ) . all you get at best, is a bunch of cheep Polypropylene webbing's .
.
 
Last edited:
You have to know exactly what webbing type you want .
Only place that comes to mind , but maybe try , ( ParaGear .com ) they stock the specialties and I think they have it but they are high-$ priced by the yard . but they have a lot of random Mil.spec. type in-stock piled up in that place .
 
Fucking mm/inch Decimal point bullshit /..sorry can't run a Caliper ... LOL .

So what is that in 1st pic. ? .
it is some thin square weave webbing ? . looks pretty soft-supple weave or pretty worn ?

( 4" wide the killer, or i would just send you some ) . I got shitloads of different type webbing's stocked here in sew room, but nothing ( 4' wide ) .
.
Belt holster for those big blocky brick police radios that I use for my galaxy s7 in a lifeproof case. Originally fit my S3 in otterbox armor case. Had it since 2013 so it is well worn. Front, back, and belt area are 3" wide and 0.100" thick. Sides are 4" wide.

Looking to make a new one for future phone purchase cause I've looked and can't find one like it anywhere. Weave is the same on both pieces.
20190711_214312.jpg
20190711_214327.jpg
20190711_214336.jpg
20200501_162809.jpg
 
You have to know exactly what webbing type you want .
Only place that comes to mind , but maybe try , ( ParaGear .com ) they stock the specialties and I think they have it but they are high-$ priced by the yard . but they have a lot of random Mil.spec. type in-stock piled up in that place .
Already emailed paragear and they don't have 4". That's where I was looking to go for the 3" 0.100 that I need for the other parts.
3" is type 9 according to TN Webbing. They don't know what it would be for 4".

I know it was once made cause I've got it. Where are you supposed to go to figure out what type you have/ want?
 
Last edited:
fuck.. really ? that was the like last resort in my brain for you scoring .
All I got here I use in that thickness and type is 3" . and it not black color .

( Bally Ribbon ) is only other place that might have it in-stock for 4" . they Maybe sell ( full Roll ) if you BS your way with sales and you need a Roll for sample on doing a sales run or pattern . They usually only sell 1-k yards Min. for sales though threw them .
I pretty smalltime and last I ordered from bally I was ordering 5-k yards. they would not even consider lower bulk price unless for 10-k yards minimum .
.
 
Hadn't found them yet. Got a request out to them. Can't hurt. Thanks.
Also gave a request out to Hi tech narrow fabrics.
I don't mind buying it but the problem is I only need a couple yards or so max.
 

3/32 - slightly thicker or 1/16 - slightly thinner
 
*looks closer at what I have*
*notices orientation*
*rotates in brain*
*measures again the other way*

2" wide 0.07 thick and 4" long.
View attachment 7314449
-
Sounds like me and a caliper ....LOL
Sounds like you need some thinner Mil W-17337 webbing, and I do have some of that in ( 2"/black ) .
PM me your postal Addy. and will send you some, if only need small amount.
.
 
  • Like
Reactions: LeftyJason