MPA 6.5 Loads

Rondogg

Private
Minuteman
May 31, 2018
69
38
Arizona
Wanted to reach out and see who else is running the MPA 6.5 and what load development you are finding success with. I have tried multiples and have found the below to work the best. Let me know what you guys have found. Thanks.
Hornady 140gr ELD match
H-4350 40.5gr
2.70 OAL
Hornady brass once fired
Starline brass new
 
Its not complicated. Thats what hes saying, that it isnt. Its pretty much always what he listed.
If you cant get the gun to shoot in that area then you either suck or something is wrong with the rifle.
 
WTF!!! I never said it was difficult. I simply asked others what their recipe was. Guess your saying most on this forum are stupid. My rifle shoots just fine.
 

Attachments

  • 20180829_144731.jpg
    20180829_144731.jpg
    336 KB · Views: 53
Yeah, have you checked your length to the lands? 2.7" is short, factory ammo is typically around 2.8-2.810 with 140 ELD's, I dont have my data in front of me at the moment but IIRC, my Saami chamber had me in the lands around 2.83ish. I jump my 140 and 147 eld's .030" as .025-.045 off the lands all held the same point of impact with a clear POI shift going closer than .025"
 
  • Like
Reactions: JL6.5
Yeah, have you checked your length to the lands? 2.7" is short, factory ammo is typically around 2.8-2.810 with 140 ELD's, I dont have my data in front of me at the moment but IIRC, my Saami chamber had me in the lands around 2.83ish. I jump my 140 and 147 eld's .030" as .025-.045 off the lands all held the same point of impact with a clear POI shift going closer than .025"
Thank you for the info