Well going through some rough times in life and need to get a little extra cash. I don’t use this rifle much and it’s going to help pay my lawyer. The rifle has been shot approximately 150 times at the most. I know that because I shot a couple boxes of factory ammo through it and a whole pack of 100 Berger 140 Elite Hunters through it. Shoots one hole groups about .4 with my load 5 shots at 100. SD was 4 ES 7. Shoots the Hornady 140 ELDM’s around half an inch at 100 as well.
-Tikka t3x CTR 6.5 Creedmoor 24” bought last year
-APA Little Bastard gen 2 Brake 6.5mm
-YooDave trigger spring at 1.5 pounds
-Leupold Mark 5 5-25x56 illuminated TMR reticle MIL MIL. This scope is heads over my NX8 and I LOVE the reticle for what I do. Low light is insanely good with this glass. Reticle is useable at 5x but not too thick at 25x. Perfect! Absolutely like new condition.
-Vortex Precision match 35mm rings 1.0” height
-Manners t4A stock in woodland (will throw in the factory stock as well. I painted it to try and match the GAP camo)
THE ONLY CON ABOUT THIS RIFLE: The factory rail comes with like 6 screws in it I think. Well one stripped. Tried to easy out it and it didn’t work. Tried to drill it out with a drill press and I quit before I did damage. The POSITIVE of the situation is an aftermarket rail does not use this screw hole. Just the standard 4 screws with a EGW 0 moa. I also have a EGW 20 MOA I’ll throw in for free.
I do not want to separate this. I’ll ship in a hard case then just send the boxes separately if you want the boxes. $3000 shipped. PayPal friends and family or you add the fees. I have 4000 in this set up easily.
-Tikka t3x CTR 6.5 Creedmoor 24” bought last year
-APA Little Bastard gen 2 Brake 6.5mm
-YooDave trigger spring at 1.5 pounds
-Leupold Mark 5 5-25x56 illuminated TMR reticle MIL MIL. This scope is heads over my NX8 and I LOVE the reticle for what I do. Low light is insanely good with this glass. Reticle is useable at 5x but not too thick at 25x. Perfect! Absolutely like new condition.
-Vortex Precision match 35mm rings 1.0” height
-Manners t4A stock in woodland (will throw in the factory stock as well. I painted it to try and match the GAP camo)
THE ONLY CON ABOUT THIS RIFLE: The factory rail comes with like 6 screws in it I think. Well one stripped. Tried to easy out it and it didn’t work. Tried to drill it out with a drill press and I quit before I did damage. The POSITIVE of the situation is an aftermarket rail does not use this screw hole. Just the standard 4 screws with a EGW 0 moa. I also have a EGW 20 MOA I’ll throw in for free.
I do not want to separate this. I’ll ship in a hard case then just send the boxes separately if you want the boxes. $3000 shipped. PayPal friends and family or you add the fees. I have 4000 in this set up easily.
Attachments
-
21748191-D447-4287-B810-115A376F2CDF.jpeg -
59919AE1-9457-498D-BF18-83973CF17DBD.jpeg -
A5850C01-3F21-4E04-A7D2-F0B4DBF4AE50.jpeg -
18B0544D-2F46-48D4-9E94-499C8EF84007.jpeg -
FCC3BA27-C6CF-468E-B2F6-15EA3640E489.jpeg -
444F9403-945C-4A12-87CB-82CD2860DA3D.jpeg -
A54DFDD5-EBD7-4E43-AC5C-33F1D68563BD.jpeg -
C92ADB96-18C2-4FD1-A0F3-039B44B223E9.jpeg
Last edited:
