ive got 2 of them, regular offset panning bipods. Try calling them Dale and Kathy are great folks but they are a small shop.
What are you hunting
^ those are known as long legged rats here
Carry Lyme disease, Rocky Mountain fever. Now the lone star tick that makes you allergic to red meat and pork.
Glad we can get permits to shoot them. They need eradicated
Carry Lyme disease, Rocky Mountain fever. Now the lone star tick that makes you allergic to red meat and pork.
Glad we can get permits to shoot them. They need eradicated
Putting in some work with the prototype chassis at my local club match in WI. Ended up in 3rd out of 100 shooters.
You r supposed to wear orange in some places lol
Most places here you don’t need a license
You do, my friend. That barrel is shooting hand loads that were tailored for my other dasher and now, they shoot equally well. Before the tuner, it shot that ammo over 1" groups. No miss. Shoots super tight now.
Are you direct threading your can in front of it or you using an ASR mount assuming that's an Omega?
Direct thread and no, it is a poor man's omega, the Harvester 30.
Could you run an ASR mount with that tuner?
I can't remember from the other thread and can't find it now either, did your barrel have to be turned down for the tuner?
I'm pretty sure you can run it with an asr mount. And no, I did nothing to my barrel at all. Uses existing muzzle threads.
Wanna post the link to that one think I'm going to try one
Hes currently out of stock but another batch is otw soon from nitride.
Hes currently out of stock but another batch is otw soon from nitride.
Just 2 AT’s doing their thing at the WAR Rifles competition. We both tied in points. My 6.5 barrel is still going strong at 2500 rounds. Although seeing how my buddy did with his 6 Creedmoor makes me want to change my mind about shooting 6mm .
Speaking of 6mm Creed.... proof prefit that I stole in the PX. 24 inch proof carbon prefit. ASR set up for 6mm fun!
Looks good
What suppressor are you running?That hunk of junk is a Griffin Armament Recce 5 in 5.56. You can shoot 6mm through most 556 cans. This can is not my favorite. I hate the mounts, the tone, the looks, etc. it was cheap so I bought it. My TBAC 338SR is in jail. #freewilly.
The rifle is Norma Jean. She’s so fine.
The rifle is Norma Jean. She’s so fine.
Last edited:
AXSR-ELR?
Just received this 32" heavy! 33xc barrel from Travis at TS Customs. Going to do a test and see if this will save me $12k this fall.
The charlie/delta unit aligns perfectly too!
Just received this 32" heavy! 33xc barrel from Travis at TS Customs. Going to do a test and see if this will save me $12k this fall.
The charlie/delta unit aligns perfectly too!
That thing is gorgeous! How will it save you 12k this fall? I want to put my rifle to that kind of use! Keep you from buying the AX50 ELR?
Exactly!! If this is consistent at 2 miles (which it should be), I will probably pass on the AX50 ELR.
For anyone who is curious. 6CM feeds like butter in the new full size S/A mags of the ASR/AXSR. No hang ups at all. Fast, slow, medium. It just seems to run so far. This is with Berger 105s seated 2.810.
Are those mags and S/A bolt out now?
Thank you! Yes, it's the 4602.
I had an adjustable era-tac on there, but it didn't fit in the transit case. The spuhr fits great!
Back in stock at MHSA. You are welcome.
www.milehighshooting.com
Accuracy International 28538: AXSR/AXMC .308 Magazine (10 Round)
28538BL: 10 Round double-stack magazine designed for the following Accuracy International Rifle Systems: ASR, AXSR, and AXMC. This magazine replaces the need for a magazine adapter when used in the AXMC
www.milehighshooting.com Got mine in I think November, haven't even looked at that stuff yet 
Correction.. I got it Sept 28!
Correction.. I got it Sept 28!
Last edited:
went 2 for 2. my cows ran up back into the mix so i had to hold off on more
That’s with the AI Covert Transit Case right? Not their regular transit cases? (Long and folded variants)
When it’s too hot to go outside and shoot, stay indoors and enjoy the AC 
Didn't you have a 375 CT?
Still do. I just finished up loading these 416's for our 3 mile attempt next week too. I just want to be able to shoot from 100yd to 2 miles with one switch barrel rifle.
Have you checked with Whidden on the .408 dies? If they are out of stock, I know PTG just had a big sale on their .408 dies. They had a ton of them in stock. A couple guys we shoot with got them from there. Also, Cutting edge has the 425 or 450 grain lazers in stock now too. They shoot awesome in my friends shadows. Hope that helps!
Todd
Todd
Pic Request
My wandering mind would love to see an AXSR with forend removed and Atlas bipod attached to the short arca section in front of the mag-well. Would love to know the weight of that thing is in that configuration, especially with a proof barrel installed. Just wondering what the absolute lightest configuration is, and how functional it might look! Thanks to anyone who actually does this!
My wandering mind would love to see an AXSR with forend removed and Atlas bipod attached to the short arca section in front of the mag-well. Would love to know the weight of that thing is in that configuration, especially with a proof barrel installed. Just wondering what the absolute lightest configuration is, and how functional it might look! Thanks to anyone who actually does this!
Yes, it’s 7075 aluminum. The grip section uses the factory AI plastic grip panels, but yes the entire forend is aluminum like an ACC or MPA.
