Which Dillon 650 conversion kit?

[Dthomas3523]

Buying a 650 from a buddy and I need conversion kits.

I’ll be running:

6x47lapua
6 dasher
6br

Which kit/s do I need?

 

[TheOfficeT-Rex]

6BR and dasher are the #1 shell plate, #1 pins, and a 6PPC powder funnel.

ETA: It's pretty much a 308 kit with a 6PPC funnel. I'm not familiar with any x47s but you may get by with the same plates/pins/funnel and slight adjustment to the powder die.

 

[Kadams1563]

I was told 6 creedmoor version for 6GT Wichita is basically a 6x47 L

 

[47guy]

6BR and dasher you need a 22-250 conversion kit....308 kit will work but youll have cases fall over when they drop into #1...and a 6PPC funnel.
also it looks like the 47 will work with the 22-250 kit if not youll just need to replace the orange piece with the black piece from the 308/30-06 kit which you can buy just that piece.

pic is a 6BRA with the 22-250 kit

 

[Cascade Hemi]

You might be better off taking a smaller case feed adapter like the PPC and opening it up to fit longer cases. You may also want to try different diameter case feed arm bushings, I like the red pistol bushing for .473 case head cartridges better than the white rifle bushing.

 

[47guy]

You might be better off taking a smaller case feed adapter like the PPC and opening it up to fit longer cases. You may also want to try different diameter case feed arm bushings, I like the red pistol bushing for .473 case head cartridges better than the white rifle bushing.

the white bushing and orange case feed adapter that comes with the 22-250 kit works perfect for 6BR 6BRA and 6BRX so it will work fine with the dasher and worst case have to open the orange a bit for the 6x47.