Switch to one piece scope mount or rings
- Thread starter Schw15
- Start date
"Need" or want?
There are advantages but they might not apply to you.
So far, you have offered way too few details to get a meaningful response.
So I'll give you a qualified "maybe?"
There are advantages but they might not apply to you.
So far, you have offered way too few details to get a meaningful response.
So I'll give you a qualified "maybe?"
Arc Nucleus with whiskey 3 gen 6 chassis. Shoot long range. I switch my own barrels if i have to take scope off i want it to stay as close to the same as possible and the 1 piece seems to be best. Then the added moa with my 20 moa rail would be nice
Too many canted pieces and you might run out of travel in the opposite direction.
If the option is good rings or inexpensive 1-piece, I'd say stay with the rings you have.
I have a couple of whiskeys and all wear rings, I don't feel the need to run a 1-piece. That said, I don't move scopes either, which I know to be a PiTA.
If you aren't moving to this based on a specific need, I'd say stay with what you have and spend the money elsewhere. If you just want a 1-piece because you want it, rock on. Aadmounts are ugly but they lock up solid and have been great for me, when you can get them.
If the option is good rings or inexpensive 1-piece, I'd say stay with the rings you have.
I have a couple of whiskeys and all wear rings, I don't feel the need to run a 1-piece. That said, I don't move scopes either, which I know to be a PiTA.
If you aren't moving to this based on a specific need, I'd say stay with what you have and spend the money elsewhere. If you just want a 1-piece because you want it, rock on. Aadmounts are ugly but they lock up solid and have been great for me, when you can get them.
Switch a barrel and you have to rezero anyways so any return to zero is a waste of time. I have only used rings and switch out barrels without issues. If you feel you want a mount then get one but don't expect any real difference.
Badger makes a solid one, the Condition One is really nice but unless you need to hang shit off the mount and/or need it a bit lighter, the older one works just fine. I have a few of those in fact. Zero complaints. I don't use the +MOA but it's an option for sure.
ADM makes the Recon mount, it's the only one they make that I'd concern myself with (doesn't have vertical split rings). For the price though there are other options, but if this is going on a SCAR platform, there is no better mount IMO, or at least one that doesn't rake the knuckles.
A good solid one piece mount will almost always be better than a pair of rings.
ADM makes the Recon mount, it's the only one they make that I'd concern myself with (doesn't have vertical split rings). For the price though there are other options, but if this is going on a SCAR platform, there is no better mount IMO, or at least one that doesn't rake the knuckles.
A good solid one piece mount will almost always be better than a pair of rings.
There are ring options that have cant options, most common is the Burris XTR Signature rings.
As far as one piece mounts vs rings go i don't think it really matters, I've recently got my first Spuhr mounts sure it's nicely build and looks cool but ultimately it just does the same job as the rings I had before.
Unless you need the added cant or ability to bolt a bunch of crap to your mount, don't feel obligated to buy a one piece mount.
As far as one piece mounts vs rings go i don't think it really matters, I've recently got my first Spuhr mounts sure it's nicely build and looks cool but ultimately it just does the same job as the rings I had before.
Unless you need the added cant or ability to bolt a bunch of crap to your mount, don't feel obligated to buy a one piece mount.
I have $50 Burris rings do the job at a mile. Maybe I'd eliminate my misses altogether
if only I had a Spuhr?
if only I had a Spuhr?
Similar threads
