Which bushings?

[Thomasj1107]

I ordered the RCBS matchmaster FL die and seater. Which bushings do I need for 6.5 prc?

 

[Punkur67]

I ordered the RCBS matchmaster FL die and seater. Which bushings do I need for 6.5 prc?

It depends on your brass thickness.

 

[Thomasj1107]

It depends on your brass thickness.

I don’t have them yet to measure but I will be using ADG brass

 

[Punkur67]

I don’t have them yet to measure but I will be using ADG brass

Thickness will vary. You need to wait till you have your brass. That is unless you plan to neck turn to a specific thicknesses

 

[Thomasj1107]

Thickness will vary. You need to wait till you have your brass. That is unless you plan to neck turn to a specific thicknesses

Noted. Is every box of adg brass going to be different to the point where I will need several sizes?

 

[FLIGHT762]

From information easily found on the net using ADG brass, You're going to be in the .290"-.292" range, depending on how much neck tension you want. That will be up to you to decide.

I have 5 different sized bushings for my 308 due to the variety of brass that I have.

Hopefully, someone using ADG brass can chime in and you can get a starting point. You will probably find you may need a couple of sizes.

 

[cowman]

My loaded ADG brass needs .292 bushing, anyone have one to part with?