D

dbow

Minuteman
Private From Nevada
Messages
31
Featured content
0
Reaction score
5
XP
6
Level
1
Joined
Last seen

Latest activity Postings Featured content About Feedback Stats

    • D
      dbow replied to the thread Switch barrel build.
      Thank you. I think I’m going to experiment with my Zermatt Origin and play with a strap wrench. I’ll see how repeatable it is swapping...
    • D
      dbow reacted to bohem's post in the thread Switch barrel build with Like Like.
      Back on topic... @dbow the rifle you're talking about can be done, though as several people mentioned, those kind of switch barrel guns...
    • D
      dbow reacted to SRPowah's post in the thread Switch barrel build with Like Like.
      If you use a wrench to torque the barrel on, it ain't coming off without external leverage.
    • D
      dbow replied to the thread Switch barrel build.
      Lots of good info and opinions passed my way. I’m liking the idea of wrench flats and using torque to keep the barrel on. When testing...
    • D
      dbow reacted to JR1200W3's post in the thread Switch barrel build with Like Like.
      In reality, you probably don't want a 6.5CM built like you want a 338NM built. Two different guns with two different purposes. My very...
    • D
      dbow reacted to JR1200W3's post in the thread Switch barrel build with Like Like.
      I've tested 20, 30, and 40 ft lbs of torque using wrench flats. I saw no difference in Poi or accuracy. I no longer use a torque wrench...
    • D
      dbow reacted to Maurygold's post in the thread Switch barrel build with Like Like.
      I would skip the wto. You’ll need to modify the chassis for it and some people experience issues with repeatability and there’s really...
    • D
      dbow reacted to WB300's post in the thread Switch barrel build with Like Like.
      I believe I read on here that it was recommended to use a full thread (not QC) barrel for the Lapua and Norma Mag cartridges on the...
    • D
      dbow replied to the thread Switch barrel build.
      I think the draw to the QC feature is not needing to remove the barreled action from the chassis to swap things out. I suppose...
    • D
      dbow posted the thread Switch barrel build in Bolt Action Rifles.
      I would like to build a personal version of a Barrett MRAD or AI AXSR. I would like to have 3 barrels, 338 Norma mag, 300 win mag, and a...
    • D
      dbow replied to the thread Suppressors Baffle erosion DT vs brake.
      sounds like I’m on par with y’all then. My semi-autos are TBAC SR mounts. Area 419 on all the bolt guns
    • D
      dbow replied to the thread Suppressors Baffle erosion DT vs brake.
      I think is just my boredom wanting a new project. I think you’re right about it being an expense for no gain. I agree with you about...
    • D
      dbow posted the thread Suppressors Baffle erosion DT vs brake in The Armory.
      Just how much does a brake help prevent baffle erosion? I’m using the area 419 mounts for a few suppressors but have recently started...
    • D
      dbow replied to the thread MPA BA Chassis magazine issues.
      You mean is the release hitting something under recoil? If so, no that’s not happening. I’m shooting prone on a mat with a bipod and a...
    • D
      dbow replied to the thread MPA BA Chassis magazine issues.
      It is latching when inserted. I can hear a positive click from the latch when inserting the mag. I can’t pull the mag out without...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back
Home
Forums
Merch
Alerts