Recent content by 350 Mag

Lee is making the Collet Die with sample brass and bullet. Thanks for tip about checking fired cases.....checked and they are .001-.0015 runout now. Will check case necks but all I have is RCBS runout gauge so not the best tool to check neck thickness.

I have 4 bags of R&P Brass in 7mm Saum. It's hard to find (especially in Canada) Trouble is the necks have .0035-.004 runout. Accuracy of rifle shooting finished ammo is acceptable but is there a way to correct this runout? I have a Lee Collett die coming will this help or it won't exert...

I checked my factory SAUM Rem brass and finished cases. Both have .0035 runout. I checked some Nosler 7mm rem mag I had on bench. .001 runout on Berger 168. Will I be able to straighten these necks with Lee Collett die(I ordered a custom one)? I have source for ADG brass so definitely going...

I have 700 S/A throated for 180 Berger. Seekins WSM bottom metal allows to seat bullets out to lands and still function in magazine. I actually found 175 gr ELDx load because I wasn't happy with feeding of Berger VLDs. Eld-X feeds perfect except for last round.

From Hodgdon reloading data...65.5 C is their max load for 175gr.

Hey can anyone with Quickload run numbers for H1000 and 175 Eld-X and 180 Berger? I noticed some of my brass at 64.5 load had some faint "smileys". This was virgin Rem brass full length sized brass. I am going to bump the should back and size neck with Lee Collett. Going to back off a full...

Rem 700 S/A McMillian A3 Burris Eliminator 3 Rem Brass CCi-BR2 175 gr Eld-X(.oo5 off lands) 64.5 gr H-1000( pretty close to max @ 65.2 I had sticky extraction and tight bolt lift and primer pocket was loose) 24" Krieger 1 in 9.5" 2940-2957 Using Strelok Pro I was able to program perfect drop...

7mm Saum.

Bumping this back. Interested in a better press.