Recent content by Andrew@Silencerco

  1. Andrew@Silencerco

    Suppressors SWR Spectre II - Update

    The thread length on the FV-SR seems to be a little inconsistent, some customer report that they are within the desired length and others have problems. The best way to check is to measure the threads.
  2. Andrew@Silencerco

    Suppressors baffle strikes???????

    Another thing to check is length of the threads. If they are longer .400" you are likely getting contact between the muzzle and o-ring causing the suppressor to cant.
  3. Andrew@Silencerco

    Suppressors Silencerco/SWR LE Statement

    Basically if they don't sign the Benefit of Use form for us to use in our continued lobbying efforts we won't sell them our products. If they sign it's win win, they get to use our products and we get "support" in our lobbying efforts from an unlikely source.
  4. Andrew@Silencerco

    Suppressors SWR Spectre II - Update

    If you want to run your conversion kit I would just run one of our rifle thread spacers when using the .22 can. 1/2x28 Rifle Thread Spacer | Superior Silence, Silencerco accessories and merchandise
  5. Andrew@Silencerco

    Suppressors Spectre to SpectreII upgrade: Info for all users

    No, it did not.
  6. Andrew@Silencerco

    Suppressors Spectre to SpectreII upgrade: Info for all users

    The threads on the host gun that was having the problem are not cut to our specs. We have an internal o-ring integrated into the design of the suppressor to offer the best seal and keep the threads as clean as possible. Attached is a drawing of the thread spec available on our website. If you...
  7. Andrew@Silencerco

    Suppressors Osprey 45 & Glock 19 FTF & FTE

    White lithium grease is what we use when we assemble them.
  8. Andrew@Silencerco

    Suppressors Osprey 45 & Glock 19 FTF & FTE

    Very good recommendations in here so far. I would also recommend making sure the piston has a little bit of grease on the area where it makes contact with the o-ring and try some 147gr subs or some lower grain supers and see if it functions. As mentioned I think it is likely that your ammo is...
  9. Andrew@Silencerco

    Suppressors SWR Spectre II - Update

    At .400" the muzzle should lightly touch the o-ring. The Sparrow thread spec we provide has a slight gap between the threaded portion and the o-ring however the smooth portion that actually engages the o-ring on our spec will protrude slightly past the o-ring itself. If the threads are longer...
  10. Andrew@Silencerco

    Suppressors SWR Spectre II - Update

    The original Spectre has an internal thread length of .650". The Sparrow, Spectre II and Warlock II will work fine with threads cut to .400" or shorter. The issue doesn't come from contact with the o-ring but rather contact with the o-ring retention shelf that is cut at the back of the threaded...
  11. Andrew@Silencerco

    Suppressors Suppressor Concentricity

    We have been in contact with Greg at Primal Rights regarding his recent video on suppressor concentricity. We have offered suggestions as to thread specs for rimfire for use with our silencers to provide more accurate representation of what run out numbers on ours or other suppressors are. Greg...
  12. Andrew@Silencerco

    Suppressors Suppressor Concentricity

    Orkan, can you call Gary our VP of Sales at 801-417-5384 he has some things about your video he would like to discuss with you.
  13. Andrew@Silencerco

    Suppressors What's the coating on ss sparrow suppressors?

    The finish is a Black Oxidization. Anytime you use something aggressive enough to eat the lead and carbon build up off the metal there is a chance you will take the finish with it. In the SS Sparrow the finish on the core is cosmetic only, the discoloration will not effect performance. I got...
  14. Andrew@Silencerco

    Suppressors How often to clean sparrow ss?

    The dip will strip the finish off of anything you put in it. It won't hurt the metal from what I have seen but it will discolor the finished parts. An Ultrasonic cleaner will yield the same result.
  15. Andrew@Silencerco

    Suppressors Big Kudos to Silencerco I sent in my Osprey and my Specte with problems I likely caused

    Please call or Email me directly so I can get you taken care of, [email protected] or 801-417-5384 Thanks
See more
Top Bottom
Back
Home
Forums
Merch
Alerts