Recent content by AustinTXMarine

Pictures do say a thousand words....Looks very similar to my bench....all redding dies although my bullets are different types. Some Hornady, but not all of them. Thanks again all.

Thank you for the recommendations. I am sure it will take a little bit to get it running smoothly, but it sounds like the dies I have will work for the time being.

I finally broke down and went for a progressive press. Been working off single stage and turret presses for years. I have only used Type-S Match dies from Redding or Titanium Carbide dies for the 45 (also Redding). What should I be using (make and model numbers if possible) on a Dillon 650...

Re: Need guidance on a rifle case for a 52.5" gun Thank you all for the recommendations. I have looked at the 1770, but the bear track cases are new to me. Thanks again, Matt

Re: Need guidance on a rifle case for a 52.5" gun Agreed, not going to go corner to corner. Already have pelican and SKB cases that are 50" internal length, they will not work.

Don't know if this is the right forum, but since this is the 1000+ ELR forum, I figure more people here have the knowledge I need on finding a case for a very long gun. Trying to find a case for the following: AICS 338LM chassis with a 31" total barrel length (including the brake). Is is a 2.0...

Re: Ballistic Info for .308 175gr SMK Oops, looks like he is selling the .2MOA gun... http://www.snipershide.com/forum/ubbthre...895#Post2660895

Re: Ballistic Info for .308 175gr SMK <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: doubled</div><div class="ubbcode-body">If you guys can verify the shot of that group at 500.....Then you can video tape me licking his asshole and post it on youtube for the...

Re: Ballistic Info for .308 175gr SMK OK, got to step in on this one...too funny not to respond. Adamxdavis, What part of texas are you located? Happy to help verify something that no one has ever done with a auto... By verify, I mean that I will sit next to you, with a video camera, while...

Re: Harrell's Precision new tactical style brake Anyone using one of his brakes on a 338LM? In the middle of a build and considering options for the brake. Also, anyone know the most common thread type for a can in 338 calibers? Would like to be able to move to a can in the future and...

Got an old one here that I am working on for a friend. Couple questions... 1. Barrell is pretty bad, where can I get a replacement or are there any others that will produce better results than the original? (thing gets hot and no rounds come out anywhere near each other on the paper) 2...

Couple questions that I cannot find the answer to... Can you change the reticle on a Nikon Buckmaster 6x18 from a BDC to something else? Can you change the reticle on a Zeiss Conquest 4.5x14 from a Rapid Z-1000 to something else? I don't mind sending into the manufacturer if needed, but I...

Re: Issue with Lube inside case neck Kombayotch is right, just getting it in there from spray. I will just run things back through media before priming. Thanks again to all.

Re: Issue with Lube inside case neck Thanks for the feedback. I don't run that many cases at one time, so I think I will go with the swab idea for now.

OK, so having some lube remain in the case neck that is not coming off. I am using standard RCBS lube. Anyone have a method of ensuring all lube, inside and out, is removed prior to priming, powder and seating?