Recent content by AZ2000

Excellent Wally, looks like it came together very well. AZ:)

Bryant sorry to hear that. Not sure this will help, but something that has worked for me is taking the distance to the target, as exact as possible, knowing what your scope setting was moa or mils when you did get on target, along with all the other parameters being the same when you did the...

Thanks Sat Cong, when I finally get it together I'll let you know and maybe you can teach me some more of what you know. AZ

Your welcome Bryant, did you ever get a chance to finish this testing you were doing, just curious how it came out? AZ

I was going to finish the 500 yd testing and go forward with the 1,000 yd without adding anymore updates. After I finished this morning and what I saw, thought I would go ahead and put it in the update, I learned something new about this rifle and wanted to share. Was out at the spot about 6...

Follow up. Some will say make the loads faster and I thought about this and tried it, but for my rifle it just didn't seem to work. So I did some research about world class shooters and found this article. There may be some articles by Bryan Litz but wasn't able to find them, guess I should...

Thanks Sat Cong, it was fun. Almost ready with all three powder loads to go to 1,000. Here is hopefully the last update on the 500 yd distance. The weather was a balmy 60 degrees with a nice little gusting breeze from l to r, 7 to 12 mph coming in at about -40 degrees out of the NE, not a...

Latest update on the .308 Lapua Scenar L. The rain finally stopped and was able to get back out again. The first item was to take out the three loads I have been testing with the three powders and re-run speeds and double check scope zero, found some interesting results. Let's start with...

E, I tried the in the lans at higher charges of powder when I first started developing the loads and to be quite honest had nothing that even looked like it wanted to work. That is one reason why I decided to try going back the other way and shorten them up. If you remember the whole point was...

Continuing on, sat down and crunched the numbers and this is what I came up with. Going to go back out and retry the same loads that shot the two inch groups at 500yds using the Varget and AA2495 and see what happens. Reason for this is, there was roughly 20 rounds fired between the last group...

Excellent, looking forward to your results with the 175 L's. AZ

Sat Cong, you know it's the other way around. AZ

Bryant below is a data loading chart link from Lapua's web site for the 175 Scenars, only showing what their recommended loads are for the different VV powders with the minimum and maximums from a 24" barrel. These are guide lines using specific brass or cases with their bullets and powders...

As planned was up @ 4:30am truck was loaded and ready to go, so I went. (A little American humor):D Was able to get the target set up, have a little coffee and watch the sun come up, one thing about our sunrise and sunsets in Arizona, absolutely beautiful especially with the giant cactus and...

Thanks SatCong, we will see, hopefully the wind holds. AZ