Recent content by Barn Side

Anyone have an idea about the type of bipod spigot below:

Would the Blaser Tac 2 in .223 with 1:10 twist barrel @ 24.7 inches be OK with the Federal 69gr match ammo or would it be too heavy?

I’m getting no difference between the height of the front and back of the scope rail using calipers (when measured as above). Any gurus see anything wrong in how I measured? And anyone ever heard of a Blaser Tac 2 with a 0 MOA scope rail?

Anyone know what the recommended torque is for the two screws to change the barrel?

I measure from the top to the bottom of the last pic scope rail at the chamber end (top image) getting 1.4 Inches. Next I measure from the top of the last pic rail to the bottom of the barrel (bottom image) getting 4.8 Inches. Finally I measured just the barrel diameter right in front of the pic...

Just got a Blaser Tac 2 in 223 (sans manual). Just wandering what is the recommended torque for the two screws attaching the barrel to the stock using the hex key?

Much appreciated, do you run bore-tech in your Blaser Tac 2?

Just purchased one in 17wsm and wondering what others use as a bore guide that works?

Lucas bore guides are awesome, but I’m in Australia and after something quicker.

Finally got a Blaser Tac 2 in .223 and are wondering if anyone can recommend a bore guide?

I was just on the AI website and noticed they have civilian & professional categories for rifles. Under civilian was the AT-X , AT-ELR & AXSR while under professional is AT-X military, AT-ELR & AXSR military. Just wondering anybody know the difference between the AT-X & AT-X military? Are the...

Will do, much appreciated.

I recently purchased a 223 Blaser Tac 2 in a XTEK chassis. I cannot see any indication of what MOA on the scope rail. Just wondering is there a way to figure the MOA of the scope rail?

Just wondering if a sealing plate is recommended with the HK # 2 mounting plate and Trijicon RMR Type 2 HRS on a HK VP9T OR ? I just went to torque it down with the sealing plate and was having difficulty doing so. Then I did it without and it was snug.