• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Recent content by biggin69

  1. biggin69

    6.5 PRC Reloading for the Berger 156gr EOL

    Thanks for reply. I hadnt really looked on SH but Im on it now!
  2. biggin69

    6.5 PRC Reloading for the Berger 156gr EOL

    Hello; I just started working on some new loads for my Seekins Havak Element in 6.5 PRC with the Berger 156gr EOL bullet Starting loads where determined using Quickload 3.9. COAL at 3.055". Trimmed to 2.015" CCI-200 primer. At this time i was just looking at measured velocities and checking...
  3. biggin69

    7mm Rem Mag & 195 Bergers

    Hello; I had Western Precision in Safford AZ extend the chamber I’m my rifle to allow for a new COAL of about 0.25 inches longer to allow the 195 gr to sit out of the case longer. I use 70.6gr of Retumbo with a velocity of 2,950. This is an extremely accurate and hard hitting round. PM if...
  4. biggin69

    Del Norte and Zia Monthly Matches, New Mexico

    Thanks for the info guys!! What time should I plan on being at the range??
  5. biggin69

    Del Norte and Zia Monthly Matches, New Mexico

    When is the next rifle match scheduled?? Thanks!!
  6. biggin69

    Del Norte and Zia Monthly Matches, New Mexico

    Would like to make the July 20th match but will be out of town. When is the next rifle match after that?? Thanks!!
  7. biggin69

    Suppressors Suppressor transfer father to son

    I am sorry for your loss. I too had to transfer my fathers MG's to myself when he passed. Use the ATF Form 5. They processed two of my forms in 3 weeks. http://www.atf.gov/files/forms/download/atf-f-5320-5.pdf Check the third box down on the upper right hand side "Firearm is being transfer...
  8. biggin69

    9mm AR not running FA

    My FA 9mm Colt SMG runs great suppressed using a specific 9mm buffer. It is heavier than an AR15 H3 buffer. Look for a buffer specific for 9mm.
  9. biggin69

    Del Norte and Zia Monthly Matches, New Mexico

    Thanks cwinner for the info. I shot at both ranges last June in the Score High Tactical Challenge. I loved the ranges and wanted to go back sooner but work crept in ;o). Ill be back at the Zia range in April for the NM Precision Riflemans Competition. Hopefully I can make it back up later...
  10. biggin69

    Del Norte and Zia Monthly Matches, New Mexico

    Is there ever an issue with too many shooters. Id be driving in from Las Cruces and want to make sure I get to shoot! Thanks!
  11. biggin69

    american defence vs Larue mounts which one do you like and why

    I have both Larue and ADM QD mounts. I like that the ADM can be adjusted without tools. Both work great and have a solid mount to the rail. With that said, the Larue is $100 +/- more in cost and I dont see that it is worth it. My last two QD mounts are ADM.
  12. biggin69

    Need .936 low pro adjustable gas block

    +1 for SLR. It rocks!
  13. biggin69

    Built a .308 AR, having ejection issues. Any Ideas?

    I built a 308 carbine using a Mega Arms upper/lower and a DPMS 16" barrel. I had the same issue with the gun being over gassed. Combinations of springs and buffers helped a little but did not solve the problem. I then installed a SLR adjustable clamp on gas block DA7 Adjustable Gas Block and...
  14. biggin69

    Clamp on vs Set screw gas blocks...

    I use VLTOR low profile gas blocks on all my AR's. I have not found a free floating tube they wont fit under and they seem to manufacture them with a larger gas port area on the barrel side. To my understanding, clamp on is a better system as it distributes the clamp stress uniformly around...
  15. biggin69

    6.5 Creedmoor Primers

    I'm currently working up a load for my 6.5 Creedmoor gas gun. I'm starting with 130gr VLD's and H4350 powder. Ive noticed that most people are using Federal 210 match primers with some loads using CCI 200 primers. Has anyone tried CCI 34 primers successfully? Thanks
See more
Top Bottom
Back
Home
Forums
Merch
Alerts