Recent content by BKKSW

I source the bolt carrier and bolt separately. I buy the JP bolt kit that includes the firing and cam pins. These are DLC coated. I do replace their single gas ring and extractor spring and insert/donut with Springco replacements. I headspace this to the barrels as needed. Finally I'll...

I have one.. and it's been perfect but for one small detail. Glass is really good, the box test results sin a perfect box, level if level. Turrets, ocular and parallax all turn with the perfect amount of tension. However.. my reticle is a mil-dot which is fine, but the turrets are in 1/4"...

I use it with and without. Depends what I need that day. Consider upgrading your firmware if the BT isn't working well. Also consider doing some dry runs before you get to the range to ensure your device(s) are talking to y our Labradar properly. Trying to do it at the range in the...

I read halfway through this thread and no no mention of you using a case gauge or anyone asking you if you did. This is basic. A case gauge will verify if everything behind the bullet, the case, if it's resized properly, if it needs to be trimmed, if it fits in the case gauge it will fit in...

If shooting at paper or steels just feed the rounds you want to use in your B/C and notice where the muzzle velocity falls for different barrel lengths and the distance the different barrels go transonic. Easy right? Now, if you're shooting at something organic and sentient at the same time...

Find a builder who guarantees their gas guns to be MOA. Or borrow one. Use it as a benchmark to verify you and other gas guns. Work from there.

Any chance you have a link for DC Firearms? I googled and found a place but not sure its the right place. Thank you.

That looks sweet. Thanks. I like how small this looks and seating long for a range trip appeals greatly to me, because my range is a good hours drive and with todays gas prices I can save buying this tool (just practicing for when my wife asks..)..

Is that only a micrometer head? The Sinclair's are very good. The Mitutoyo's are pretty good too. The new Starline brass I'm sizing has about .008-..012 out of the bag.. the Mighty Armory sizing die takes that to .001 or less if you run it up/down 2-3 times.

Thanks. Do you feel the arbor press is more accurate than say the Forster or Frankland Arsenal co-ax type presses? I'll look up the Wilson dies.

Looking for the current wisdom about seating dies that can be precise in both seating depth and concentricity. I'm using Mighty Armory sizing dies and love them. The cases come out of those dies with the necks showing less than .002 runout, often only .001. But when trying to make precision...

I have a TRG-S in .270w and while not at the same level as a TRG-22, the TRG line in any form is awesome..

This site lists it has "Made in Germany" in the tech data..

AR-10's order of arms is the same as an AR-15, but they "build" differently in some ways if you ever build your own. DD for a factory gun is hard to beat. If truly going for distance consider the 6.5cm or 6.5prc.. Check out the ballistic tables of each before buying.

I like my orange as well. That 8th station is worth the orange paint.