• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Recent content by bob6117

  1. bob6117

    223 Accurate Mag?

    MDM, I just removed some material from the front ( bullet tip ) area of the mag. The accurate .223 mag has a exterior metal housing with a full size interior plastic sleeve. The mags come apart by removing the floor plate and pulling out the plastic sleeve , then just remove some material in the...
  2. bob6117

    223 Accurate Mag?

    I modified my .223 Accurate mags to accept an overall length of 2.520". It only required a couple of minutes with a small file.
  3. bob6117

    powder type for 338 lm

    I used H1000 with Hornady 285 gr. BTHP with great success.
  4. bob6117

    .223 1/7.7 twist 24'' barrel bolt gun loads IDEAS ??? Help

    I use: 25.2 gr. Varget Lapua case wolf small rifle magnum primers 80 gr. hornady amax 2.520 coal ( .015 jam into the lands ) shoots sub half moa out of my Rem. 700 with a 20.5" Rock Creek 1/8 twist. Avg. velocity 2825 fps.
  5. bob6117

    .223 - 5.56

    POF 16" barreled upper 1/8 twist 5.56 LC brasss Wolf small rifle magnum primers 27.3 Varget Hornady 53 gr. HP 2.215 coal no chrono data yet sub moa
  6. bob6117

    ultimate prairie dog ar-15. buy vs build.

    I agree with waveslayer on the Rock River Arms Varmint. Heavy barrel for sustained Pdog slaying. !/8 twist with a Wylde chamber for the 69 gr. and up. Very accurate , and reasonably priced ( 700.00 msrp on their website )for the complete upper. And you could probably find one for less. I had...
  7. bob6117

    Suppressors YHM Phantom 5.56 / .223 question

    I have a YHM Phantom 5.56 stainless suppressor that uses the QD mount , and would like to have it converted to direct thread. Just wondering if this is possible or anyone knows of YHM doing this. I plan on giving them a call tomorrow , but was just interested if anyone here had a similar...
  8. bob6117

    Which primers for 223

    I use wolf primers in my AR with Varget and 77 gr. SMK , and also in my bolt .223 with Varget / 80 gr. AMAX with great success.
  9. bob6117

    Gunsmithing Removing cerakote w/ aluminum oxide

    Yeah I read that 100 - 120 was ideal I just cant find it locally , except in 5 gal for $110.00. I only am doing 1 rifle and don't need that much. Thanks for the reply.
  10. bob6117

    Gunsmithing Removing cerakote w/ aluminum oxide

    I want to remove the Cerakote finish from my barreled action. Would 70 grit aluminum oxide be ok for this? I will be refinishing with DuraBake in a different color. Thanks Bob
  11. bob6117

    Gunsmithing Modifying AI .308 mags for .223 Rem.

    I found the thread in case anyone else is interested in the mod. Currently on page 159 of gunsmithing section. Post origin 2/8/2008 Last post 12/9/2010 Bob
  12. bob6117

    Gunsmithing Modifying AI .308 mags for .223 Rem.

    Ive been searching for a thread that is here in regards to modifying a 308 AI mag. for shooting .223. None of the links work , they put me back on the SH homepage. I have several 5 rd. AI 308 mags that I'm not using and would like to modify them. Any useful link or info would be appreciated...
  13. bob6117

    Range Report 80 gr. AMAX @ 1003 yd.

    JBM puts me at 9.6 mils @ 1000 with a velocity of 2815. I was going to have it re- chambered in .223 AI , but it shoots good enough for me not to want to mess with it. I have a Bartlein HV 1 / 7.7 twist blank that will be chambered in .223 AI when the rifle needs it.
  14. bob6117

    Range Report 80 gr. AMAX @ 1003 yd.

    Boiler, Velocity was a guesstimate of 2820. I was using 77 SMK with 24.7 gr. of Varget and chronographed them at 2860 av. , but it was 70 - 75 degrees then.
  15. bob6117

    Range Report 80 gr. AMAX @ 1003 yd.

    I took my .223 out to 1000 yd. today testing some Hornady 80 gr. AMAX's . Specs: Rem. 700 Rock Creek 1/8 at 20" heavy varmint? ( .930 dia. @ muzzle) HS Precision pst-025 stock Nightforce ATACR 5-25 Conditions. 29 degrees F 2000 ASL + / - Wind was head on shooting due west , shifting...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts